[Sun Mar 25 22:36:26 2012] Detection parameters:
  Position = (387.1, 197.8) = 9 9 11.48 54 20 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.5 +/- 32.5
  Background counts = 334.5
  Rate = 0.003 +/- 0.0004

[Sun Mar 25 22:36:28 2012] Off-axis axis estimate = 9.72'
[Sun Mar 25 22:44:57 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 22:44:57 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Sun Mar 25 22:44:57 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Sun Mar 25 22:44:57 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.29"
[Mon Mar 26 01:59:47 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src27.ximg exists
[Mon Mar 26 01:59:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src27.csv
[Mon Mar 26 01:59:47 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Mar 26 01:59:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src27.csv
[Mon Mar 26 01:59:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 01:59:48 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Mar 26 01:59:48 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Mar 26 01:59:48 2012] Fit fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Mar 26 02:52:59 2012] Spatial fit model total counts = 1137.090000, observed total counts = 1131.000000
[Mon Mar 26 02:52:59 2012] Offset between fit and detection position for source 29 = 8.665493 pixels
[Mon Mar 26 02:52:59 2012] 1084.329800 total counts/ 44.619800 bgd. counts: snr = 155.649744
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 8.665493 pixels
  Position = (382.1, 204.8) = 9 9 13.98 54 20 47.8
  Extent = 22.6 (22.6-22.6)", rotation angle = 0
  Source counts = 1039.7 +/- 32.9
  Background counts = 44.6
  Rate = 0.02 +/- 0.0006
[Mon Mar 26 02:52:59 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 02:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 02:52:59 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 02:52:59 2012] Source does appear to be extended
[Mon Mar 26 02:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 02:52:59 2012] Source is confused with source 24
[Mon Mar 26 02:53:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 26 02:53:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar 26 02:53:22 2012] Initial guess for spatial extent in simple fitting = 22.58"
[Mon Mar 26 02:53:22 2012] source mask rpix=5.2, npix_max = 129, mask sum = 144, frac = 1.112
[Mon Mar 26 02:53:22 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 22.58"
[Mon Mar 26 05:49:36 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src27.ximg exists
[Mon Mar 26 05:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src27.csv
[Mon Mar 26 05:49:36 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Mar 26 05:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src27.csv
[Mon Mar 26 05:49:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 05:49:37 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Mar 26 05:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Mar 26 05:49:37 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Mar 26 05:49:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Mar 26 05:49:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 06:21:48 2012] Warning, spatial fit 27 centroid is now closest to src. 32
[Mon Mar 26 06:21:48 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.736097 pixels away
[Mon Mar 26 06:21:48 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.442920 pixels away
[Mon Mar 26 06:21:48 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 06:21:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 06:21:48 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 06:21:48 2012] Source does appear to be extended
[Mon Mar 26 06:21:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 06:22:09 2012] Counts = 1039.710000, rescaling region sizes by 2.000000
[Mon Mar 26 06:22:09 2012] XMMSAS src. selection expression = ellipse(33192.276000, 17773.248000, 2709.264078, 2709.264078, 0.000000, X, Y)
[Mon Mar 26 06:22:09 2012] Writing source region out to fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src29_src.reg
[Mon Mar 26 06:22:09 2012] Extracting stamp from image fullrun_pn_xmm0200960101_pi300-10000_cl_sm2.00.img.gz, (226, 49) - (538, 361)
[Mon Mar 26 06:22:09 2012] XMMSAS bgd. selection expression = annulus(33192.276000, 17773.248000, 9030.880260, 18061.760520, X, Y) && !ellipse(20078.869553, 25721.201080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23167.090400, 25674.837400, 1336.423238, 1336.423238, 0.000000, X, Y) && !ellipse(14659.961395, 13532.298767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25822.852200, 27934.036800, 1405.550440, 1405.550440, 0.000000, X, Y) && !ellipse(26537.383636, 35985.286804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20091.703964, 11302.200272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32926.610748, 30546.138031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.162872, 29600.055511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.470490, 29099.999329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32373.703552, 28050.155609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22692.017090, 25419.000336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20012.596039, 25325.261871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14573.246811, 23688.972626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29780.786011, 22475.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30172.404000, 21325.907600, 398.953611, 398.953611, 0.000000, X, Y) && !ellipse(19513.884628, 21209.686356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.819519, 21240.740906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31334.026000, 20324.553600, 1332.856038, 388.980011, 53.381000, X, Y) && !ellipse(30758.051849, 18566.024567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32601.518400, 18554.863940, 1697.400049, 413.308812, 52.029000, X, Y) && !ellipse(20377.271600, 17931.715200, 478.240814, 478.240814, 0.000000, X, Y) && !ellipse(21766.499100, 17565.561737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18202.953293, 17435.320602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33996.867689, 16614.219056, 1870.168054, 382.686740, 234.719627, X, Y) && !ellipse(34153.550000, 16417.716000, 784.754423, 784.754423, 0.000000, X, Y) && !ellipse(27051.997345, 19949.047913, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(36437.698486, 35733.982971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.583313, 33958.450714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30939.892151, 32368.170471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24286.120400, 28969.083200, 276.480008, 276.480008, 0.000000, X, Y) && !ellipse(24631.500061, 28474.755859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37463.203552, 27685.399719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.564000, 26102.896000, 1131.712033, 1131.712033, 0.000000, X, Y) && !ellipse(27319.116000, 25896.612000, 1533.312044, 1533.312044, 0.000000, X, Y) && !ellipse(24336.348419, 25608.595978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27692.161454, 25338.188488, 1131.712033, 402.154997, 233.994966, X, Y) && !ellipse(28387.606267, 24357.021956, 1633.416047, 337.436283, 54.021108, X, Y) && !ellipse(28479.273320, 24210.638400, 1633.416047, 368.211211, 53.473400, X, Y) && !ellipse(29331.803136, 23126.910281, 1484.840043, 367.785217, 53.333003, X, Y) && !ellipse(30125.950000, 21424.618000, 1450.632042, 993.120029, 359.919301, X, Y) && !ellipse(31958.674200, 19421.939000, 1484.840043, 394.081611, 53.117000, X, Y) && !ellipse(17124.947678, 19352.478760, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 06:22:09 2012] Writing fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src29.gif
[Mon Mar 26 07:25:08 2012] Mean detx,y = (122.60, 12066.00) 
[Mon Mar 26 07:25:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 07:36:52 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 07:36:53 2012] Setting source spectrum file to fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Mar 26 07:36:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Mar 26 12:24:24 2012] Updating aperture counts using extracted products
[Mon Mar 26 12:24:24 2012] Error reading totcts from fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Mar 26 12:24:28 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 12:24:28 2012] Using photon index=1.80, rate=0.0175, arf fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src29.arf
[Mon Mar 26 12:24:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 12:24:28 2012] Updating source flux to 7.5e-14
[Mon Mar 26 12:27:17 2012] Flag c found in src. 29 procflags, skipping spectral fitting