[Sun Mar 25 22:36:23 2012] Detection parameters:
  Position = (266.8, 296.0) = 9 10 11.36 54 27 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 20706.3 +/- 170.8
  Background counts = 379.9
  Rate = 0.4 +/- 0.003

[Sun Mar 25 22:36:28 2012] Off-axis axis estimate = 2.30'
[Sun Mar 25 22:44:57 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Sun Mar 25 22:44:57 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Sun Mar 25 22:44:57 2012] source mask rpix=1.7, npix_max = 20, mask sum = 15, frac = 0.746
[Sun Mar 25 22:44:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.58"
[Mon Mar 26 01:59:46 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 26 01:59:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 01:59:46 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 26 01:59:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 01:59:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 01:59:47 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 26 01:59:47 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 26 01:59:47 2012] Fit fullrun_pn_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 26 02:52:59 2012] Spatial fit model total counts = 16784.500000, observed total counts = 15997.000000
[Mon Mar 26 02:52:59 2012] Offset between fit and detection position for source 2 = 0.293978 pixels
[Mon Mar 26 02:52:59 2012] 16596.330000 total counts/ 3682.830000 bgd. counts: snr = 212.790939
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.293978 pixels
  Position = (266.8, 295.7) = 9 10 11.35 54 27 23.3
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 12913.5 +/- 128.8
  Background counts = 3682.8
  Rate = 0.2 +/- 0.002
[Mon Mar 26 02:52:59 2012] Spatial fit model total counts = 9797.350000, observed total counts = 13429.000000
[Mon Mar 26 02:52:59 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar 26 02:52:59 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 02:52:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 02:52:59 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 02:52:59 2012] Source does appear to be extended
[Mon Mar 26 02:52:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 02:52:59 2012] Source is confused with source 15
[Mon Mar 26 02:53:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 26 02:53:22 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Mon Mar 26 02:53:22 2012] source mask rpix=1.3, npix_max = 12, mask sum = 11, frac = 0.868
[Mon Mar 26 02:53:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.57"
[Mon Mar 26 05:49:36 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 26 05:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 05:49:36 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 26 05:49:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 05:49:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 05:49:37 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 26 05:49:37 2012] fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 26 05:49:37 2012] Fit fullrun_pn_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 26 06:21:48 2012] Spatial fit model total counts = 16785.000000, observed total counts = 15997.000000
[Mon Mar 26 06:21:48 2012] Offset between fit and detection position for source 2 = 0.000110 pixels
[Mon Mar 26 06:21:48 2012] 16597.000000 total counts/ 3681.500000 bgd. counts: snr = 212.862335
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000110 pixels
  Position = (266.8, 295.7) = 9 10 11.35 54 27 23.3
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 12915.5 +/- 128.8
  Background counts = 3681.5
  Rate = 0.2 +/- 0.002
[Mon Mar 26 06:21:48 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 06:21:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 06:21:48 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 06:21:48 2012] Source does appear to be extended
[Mon Mar 26 06:21:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 06:22:08 2012] Counts = 12915.500000, rescaling region sizes by 3.000000
[Mon Mar 26 06:22:08 2012] XMMSAS src. selection expression = ellipse(23167.090400, 25674.837400, 1002.317429, 1002.317429, 0.000000, X, Y)
[Mon Mar 26 06:22:08 2012] Writing source region out to fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2_src.reg
[Mon Mar 26 06:22:08 2012] Extracting stamp from image fullrun_pn_xmm0200960101_pi300-10000_cl_sm2.00.img.gz, (209, 238) - (324, 353)
[Mon Mar 26 06:22:08 2012] XMMSAS bgd. selection expression = annulus(23167.090400, 25674.837400, 5011.587144, 10023.174288, X, Y) && !ellipse(20078.869553, 25721.201080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25822.852200, 27934.036800, 1405.550440, 1405.550440, 0.000000, X, Y) && !ellipse(13961.708603, 34191.567596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26537.383636, 35985.286804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32926.610748, 30546.138031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.162872, 29600.055511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.470490, 29099.999329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32373.703552, 28050.155609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22692.017090, 25419.000336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20012.596039, 25325.261871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14573.246811, 23688.972626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29780.786011, 22475.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30172.404000, 21325.907600, 398.953611, 398.953611, 0.000000, X, Y) && !ellipse(19513.884628, 21209.686356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17801.819519, 21240.740906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31334.026000, 20324.553600, 1332.856038, 388.980011, 53.381000, X, Y) && !ellipse(30758.051849, 18566.024567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32601.518400, 18554.863940, 1697.400049, 413.308812, 52.029000, X, Y) && !ellipse(20377.271600, 17931.715200, 478.240814, 478.240814, 0.000000, X, Y) && !ellipse(21766.499100, 17565.561737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18202.953293, 17435.320602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33192.276000, 17773.248000, 1806.176052, 1806.176052, 0.000000, X, Y) && !ellipse(12496.470947, 17133.373413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33996.867689, 16614.219056, 1870.168054, 382.686740, 234.719627, X, Y) && !ellipse(27051.997345, 19949.047913, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26372.583313, 33958.450714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30939.892151, 32368.170471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24286.120400, 28969.083200, 276.480008, 276.480008, 0.000000, X, Y) && !ellipse(24631.500061, 28474.755859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27120.564000, 26102.896000, 1131.712033, 1131.712033, 0.000000, X, Y) && !ellipse(27319.116000, 25896.612000, 1533.312044, 1533.312044, 0.000000, X, Y) && !ellipse(24336.348419, 25608.595978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27692.161454, 25338.188488, 1131.712033, 402.154997, 233.994966, X, Y) && !ellipse(28387.606267, 24357.021956, 1633.416047, 337.436283, 54.021108, X, Y) && !ellipse(28479.273320, 24210.638400, 1633.416047, 368.211211, 53.473400, X, Y) && !ellipse(29331.803136, 23126.910281, 1484.840043, 367.785217, 53.333003, X, Y) && !ellipse(30125.950000, 21424.618000, 1450.632042, 993.120029, 359.919301, X, Y) && !ellipse(31958.674200, 19421.939000, 1484.840043, 394.081611, 53.117000, X, Y) && !ellipse(17124.947678, 19352.478760, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 26 06:22:08 2012] Writing fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2.gif
[Mon Mar 26 06:28:45 2012] Mean detx,y = (-3400.95, 65.23) 
[Mon Mar 26 06:29:06 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 06:33:11 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 06:33:12 2012] Setting source spectrum file to fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 26 06:33:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar 26 12:24:21 2012] Updating aperture counts using extracted products
[Mon Mar 26 12:24:21 2012] Error reading totcts from fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 26 12:24:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 12:24:26 2012] Using photon index=1.80, rate=0.217, arf fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2.arf
[Mon Mar 26 12:24:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 12:24:26 2012] Updating source flux to 7.1e-13
[Mon Mar 26 12:27:17 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Mon Mar 26 12:27:17 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Mar 26 12:33:48 2012] Reading fit data from xmm0200960101/analysis//spectral/fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2_pl.csv
[Mon Mar 26 12:33:48 2012] Spectral fit parameter nH value = 1.36252e+12
[Mon Mar 26 12:33:48 2012] Spectral fit parameter PhoIndex value = 2.03229
[Mon Mar 26 12:33:48 2012] Failed to get F(0.3-8.0) from xmm0200960101/analysis//spectral/fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 12:33:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 12:33:48 2012] Using Nh = 1.4e+12, photon index=2.03, rate=0.217, arf fullrun_pn_xmm0200960101_pi300-10000_pass1_cl_src2.arf
[Mon Mar 26 12:33:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 12:33:48 2012] Updating source flux to 6.2e-13