[Sun Mar 25 22:36:31 2012] Detection parameters:
  Position = (297.6, 321.8) = 9 9 55.99 54 29 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45364.8 +/- 251.4
  Background counts = 108.2
  Rate = 0.6 +/- 0.003

[Sun Mar 25 22:36:34 2012] Off-axis axis estimate = 1.69'
[Mon Mar 26 02:05:07 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Mar 26 02:05:07 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Mar 26 02:05:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Mon Mar 26 02:05:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Mar 26 02:52:42 2012] fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Mar 26 02:52:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 02:52:42 2012] fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Mar 26 02:52:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_src1.csv
[Mon Mar 26 02:52:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 02:52:42 2012] fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Mar 26 02:52:42 2012] fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Mar 26 02:52:42 2012] Fit fullrun_mos2_xmm0200960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar 26 02:53:06 2012] Spatial fit model total counts = 34545.600000, observed total counts = 33852.000000
[Mon Mar 26 02:53:06 2012] Offset between fit and detection position for source 3 = 0.267733 pixels
[Mon Mar 26 02:53:06 2012] 34673.550000 total counts/ 8404.750000 bgd. counts: snr = 286.535103
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.267733 pixels
  Position = (297.4, 321.6) = 9 9 56.09 54 29 16.1
  Extent = 5.3 (5.3-5.4)", rotation angle = 0
  Source counts = 26268.8 +/- 186.2
  Background counts = 8404.8
  Rate = 0.4 +/- 0.003
[Mon Mar 26 02:53:06 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 02:53:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 02:53:06 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 02:53:06 2012] Source does appear to be extended
[Mon Mar 26 02:53:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 05:51:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar 26 05:51:29 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Mon Mar 26 05:51:29 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.752
[Mon Mar 26 05:51:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Mon Mar 26 06:21:30 2012] fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar 26 06:21:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 06:21:30 2012] fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar 26 06:21:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_src1.csv
[Mon Mar 26 06:21:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar 26 06:21:30 2012] fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar 26 06:21:30 2012] fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar 26 06:21:30 2012] Fit fullrun_mos2_xmm0200960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 26 06:21:53 2012] Spatial fit model total counts = 34630.600000, observed total counts = 33925.000000
[Mon Mar 26 06:21:53 2012] Offset between fit and detection position for source 3 = 0.010529 pixels
[Mon Mar 26 06:21:53 2012] 34889.550000 total counts/ 8482.850000 bgd. counts: snr = 286.710262
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.010529 pixels
  Position = (297.4, 321.6) = 9 9 56.09 54 29 16.1
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 26406.7 +/- 186.8
  Background counts = 8482.9
  Rate = 0.4 +/- 0.003
[Mon Mar 26 06:21:53 2012] Vigneting correction estimate = 1.000000
[Mon Mar 26 06:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 26 06:21:53 2012] Assessing source extent using major axis lower bound
[Mon Mar 26 06:21:53 2012] Source does appear to be extended
[Mon Mar 26 06:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 26 11:23:31 2012] Counts = 26406.700000, rescaling region sizes by 3.000000
[Mon Mar 26 11:23:31 2012] XMMSAS src. selection expression = ellipse(25828.233800, 27929.546000, 965.736028, 965.736028, 0.000000, X, Y)
[Mon Mar 26 11:23:31 2012] Writing source region out to fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3_src.reg
[Mon Mar 26 11:23:31 2012] Extracting stamp from image fullrun_mos2_xmm0200960101_pi300-10000_cl_sm2.00.img.gz, (242, 266) - (353, 377)
[Mon Mar 26 11:23:31 2012] XMMSAS bgd. selection expression = annulus(25828.233800, 27929.546000, 4828.680139, 9657.360278, X, Y) && !ellipse(23172.173320, 25668.805400, 437.534413, 437.534413, 0.000000, X, Y) && !ellipse(20053.705220, 25587.664800, 387.994411, 387.994411, 0.000000, X, Y) && !ellipse(30226.993324, 21302.520200, 456.573613, 456.573613, 0.000000, X, Y) && !ellipse(26587.542450, 35968.448608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32369.667200, 28047.109580, 348.803439, 348.803439, 0.000000, X, Y) && !ellipse(26122.468933, 29043.492340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32945.326050, 30570.707672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19563.744751, 21268.669159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20388.721600, 17924.558200, 401.408812, 401.408812, 0.000000, X, Y)
[Mon Mar 26 11:23:31 2012] Writing fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3.gif
[Mon Mar 26 11:23:48 2012] Mean detx,y = (104.53, 60.53) 
[Mon Mar 26 11:23:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 26 11:33:33 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 26 11:33:34 2012] Setting source spectrum file to fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 26 11:33:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Mar 26 12:24:30 2012] Updating aperture counts using extracted products
[Mon Mar 26 12:24:30 2012] Error reading totcts from fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Mar 26 12:24:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 12:24:31 2012] Using photon index=1.80, rate=0.385, arf fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3.arf
[Mon Mar 26 12:24:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 12:24:31 2012] Updating source flux to 4e-12
[Mon Mar 26 12:27:17 2012] Reading fit data from xmm0200960101/analysis//spectral/fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3_pl.csv
[Mon Mar 26 12:27:17 2012] Spectral fit parameter nH value = 3.86856e+21
[Mon Mar 26 12:27:17 2012] Spectral fit parameter PhoIndex value = 4.68276
[Mon Mar 26 12:27:17 2012] Failed to get F(0.3-8.0) from xmm0200960101/analysis//spectral/fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Mar 26 12:27:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 26 12:27:17 2012] Using Nh = 3.9e+21, photon index=4.68, rate=0.385, arf fullrun_mos2_xmm0200960101_pi300-10000_pass1_cl_src3.arf
[Mon Mar 26 12:27:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 26 12:27:17 2012] Updating source flux to 2.5e-12