[Wed Jun 13 10:20:33 2012] Detection parameters:
  Position = (261.3, 243.0) = 4 13 56.49 11 7 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.6 +/- 16.1
  Background counts = 26.1
  Rate = 0.004 +/- 0.0004

[Wed Jun 13 10:20:33 2012] Off-axis axis estimate = 4.84'
[Wed Jun 13 10:34:16 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 10:34:16 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Wed Jun 13 10:34:16 2012] source mask rpix=2.0, npix_max = 25, mask sum = 27, frac = 1.051
[Wed Jun 13 10:34:16 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.85"
[Wed Jun 13 10:51:40 2012] fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 13 10:51:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_src4.csv
[Wed Jun 13 10:51:40 2012] fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 13 10:51:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_src4.csv
[Wed Jun 13 10:51:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 10:51:40 2012] fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 13 10:51:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 13 10:51:40 2012] fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 13 10:51:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 13 10:51:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200910101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:08:33 2012] Source 1 is offset by -7.831699 and 3.504373 pixels which is larger than
2 X fitted extent = 2.709527 x 2.709527, not incorporating fit results
[Wed Jun 13 11:08:33 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:08:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:08:33 2012] Assessing source extent using major
[Wed Jun 13 11:08:33 2012] Source does appear to be extended
[Wed Jun 13 11:08:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:17:12 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:17:12 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Wed Jun 13 11:17:12 2012] source mask rpix=2.0, npix_max = 25, mask sum = 27, frac = 1.051
[Wed Jun 13 11:17:12 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.85"
[Wed Jun 13 11:31:00 2012] fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 13 11:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_src4.csv
[Wed Jun 13 11:31:00 2012] fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 13 11:31:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_src4.csv
[Wed Jun 13 11:31:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:31:00 2012] fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 13 11:31:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 13 11:31:00 2012] fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 13 11:31:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jun 13 11:31:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200910101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:47:13 2012] Spatial fit model total counts = -330.040000, observed total counts = 270.000000
[Wed Jun 13 11:47:13 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 11:47:13 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:47:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:47:13 2012] Assessing source extent using major
[Wed Jun 13 11:47:13 2012] Source does appear to be extended
[Wed Jun 13 11:47:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:23:46 2012] XMMSAS src. selection expression = ellipse(22684.012177, 21093.008438, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 12:23:46 2012] Writing source region out to fullrun_mos1_xmm0200910101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 12:23:46 2012] Extracting stamp from image fullrun_mos1_xmm0200910101_pi300-10000_cl_sm2.00.img.gz, (224, 206) - (299, 281)
[Wed Jun 13 12:23:46 2012] XMMSAS bgd. selection expression = annulus(22684.012177, 21093.008438, 1087.500000, 2175.000000, X, Y) && !ellipse(23044.381958, 19421.082062, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 12:23:46 2012] Writing fullrun_mos1_xmm0200910101_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 12:27:35 2012] Mean detx,y = (-6950.55, -3422.51) 
[Wed Jun 13 12:27:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:27:48 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:27:48 2012] Setting source spectrum file to fullrun_mos1_xmm0200910101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 12:27:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200910101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 12:36:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 12:36:20 2012] rmf not generated due to insufficient counts
[Wed Jun 13 12:54:00 2012] Updating aperture counts using extracted products
[Wed Jun 13 12:54:00 2012] Error reading totcts from fullrun_mos1_xmm0200910101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 12:54:00 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:54:00 2012] Using photon index=1.80, rate=0.00387, arf fullrun_mos1_xmm0200910101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 12:54:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:54:00 2012] Updating source flux to 6.2e-14
[Wed Jun 13 12:54:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting