[Fri Jan  6 12:15:25 2012] Detection parameters:
  Position = (192.1, 461.8) = 4 32 14.76 18 20 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5916.5 +/- 91.5
  Background counts = 17.9
  Rate = 0.7 +/- 0.01

[Fri Jan  6 12:15:25 2012] Off-axis axis estimate = 14.14'
[Fri Jan  6 12:55:23 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 12:55:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 12:55:23 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Fri Jan  6 12:55:23 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.079
[Fri Jan  6 12:55:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.50"
[Fri Jan  6 13:21:31 2012] fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jan  6 13:21:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 13:21:31 2012] fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jan  6 13:21:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 13:21:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 13:21:31 2012] fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jan  6 13:21:31 2012] fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jan  6 13:21:31 2012] Fit fullrun_mos2_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jan  6 13:21:41 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Fri Jan  6 13:21:41 2012] Spatial fit model total counts = 363.576000, observed total counts = 367.000000
[Fri Jan  6 13:21:41 2012] Offset between fit and detection position for source 2 = 3.399631 pixels
[Fri Jan  6 13:21:41 2012] Warning, changing simple spatial fit ID from 1 to 7
[Fri Jan  6 13:21:41 2012] 367.719000 total counts/ 146.282000 bgd. counts: snr = 18.308583
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.399631 pixels
  Position = (195.4, 462.1) = 4 32 13.72 18 20 17.8
  Extent = 23.7 (19.3-26.0)", rotation angle = 0
  Source counts = 221.4 +/- 19.2
  Background counts = 146.3
  Rate = 0.04 +/- 0.003
[Fri Jan  6 13:21:41 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 13:21:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 13:21:41 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 13:21:41 2012] Source does appear to be extended
[Fri Jan  6 13:21:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 13:21:41 2012] Source is confused with source 4
[Fri Jan  6 14:20:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jan  6 14:20:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 14:20:51 2012] Initial guess for spatial extent in simple fitting = 23.75"
[Fri Jan  6 14:20:51 2012] source mask rpix=5.5, npix_max = 142, mask sum = 144, frac = 1.014
[Fri Jan  6 14:20:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 23.75"
[Fri Jan  6 15:00:32 2012] fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jan  6 15:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_src1.csv
[Fri Jan  6 15:00:32 2012] fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jan  6 15:00:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_src1.csv
[Fri Jan  6 15:00:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 15:00:32 2012] fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jan  6 15:00:32 2012] fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jan  6 15:00:32 2012] Fit fullrun_mos2_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jan  6 15:00:41 2012] Spatial fit model total counts = 4278.050000, observed total counts = 4287.000000
[Fri Jan  6 15:00:41 2012] Offset between fit and detection position for source 2 = 3.342566 pixels
[Fri Jan  6 15:00:41 2012] 4271.460000 total counts/ 1117.470000 bgd. counts: snr = 94.350102
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.342566 pixels
  Position = (192.1, 461.7) = 4 32 14.74 18 20 16.1
  Extent = 9.2 (8.9-9.4)", rotation angle = 0
  Source counts = 3154.0 +/- 65.4
  Background counts = 1117.5
  Rate = 0.6 +/- 0.01
[Fri Jan  6 15:00:41 2012] Spatial fit model total counts = 362.074000, observed total counts = 367.000000
[Fri Jan  6 15:00:41 2012] Offset between fit and detection position for source 2 = 3.158297 pixels
[Fri Jan  6 15:00:41 2012] Warning, changing simple spatial fit ID from 1 to 7
[Fri Jan  6 15:00:41 2012] 357.508000 total counts/ 192.375000 bgd. counts: snr = 11.905827
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.158297 pixels
  Position = (195.1, 462.8) = 4 32 13.83 18 20 20.9
  Extent = 27.2 (23.3-54.4)" x 6.7 (5.5-9.2)", rotation angle = 316 (313-319) degrees
  Source counts = 165.1 +/- 18.9
  Background counts = 192.4
  Rate = 0.03 +/- 0.003
[Fri Jan  6 15:00:41 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 15:00:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 15:00:41 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 15:00:41 2012] Source does appear to be extended
[Fri Jan  6 15:00:41 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.53
[Fri Jan  6 15:00:41 2012] Source is asymmetric
[Fri Jan  6 15:32:33 2012] XMMSAS src. selection expression = ellipse(16924.330000, 40218.246000, 1633.320047, 400.305612, 315.675000, X, Y)
[Fri Jan  6 15:32:33 2012] Writing source region out to fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2_src.reg
[Fri Jan  6 15:32:33 2012] Extracting stamp from image fullrun_mos2_xmm0200811001_pi300-10000_cl_sm2.00.img.gz, (101, 369) - (289, 557)
[Fri Jan  6 15:32:33 2012] XMMSAS bgd. selection expression = annulus(16924.330000, 40218.246000, 2722.200078, 5444.400157, X, Y) && !ellipse(21416.428177, 41744.271027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17921.230789, 41187.495453, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jan  6 15:32:33 2012] Writing fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2.gif
[Fri Jan  6 15:32:37 2012] Mean detx,y = (8655.25, 13576.96) 
[Fri Jan  6 15:32:39 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 15:33:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 15:33:59 2012] Setting source spectrum file to fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jan  6 15:33:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jan  6 15:57:12 2012] Updating aperture counts using extracted products
[Fri Jan  6 15:57:12 2012] Error reading totcts from fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jan  6 15:57:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 15:57:12 2012] Using photon index=1.80, rate=0.0295, arf fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2.arf
[Fri Jan  6 15:57:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 15:57:12 2012] Updating source flux to 1e-12
[Fri Jan  6 15:57:25 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Jan  6 15:58:19 2012] Reading fit data from xmm0200811001/analysis//spectral/fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2_pl.csv
[Fri Jan  6 15:58:19 2012] Spectral fit parameter nH value = 1.38346e+21
[Fri Jan  6 15:58:19 2012] Spectral fit parameter PhoIndex value = 1.92657
[Fri Jan  6 15:58:19 2012] Failed to get F(0.3-8.0) from xmm0200811001/analysis//spectral/fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Jan  6 15:58:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 15:58:19 2012] Using Nh = 1.4e+21, photon index=1.93, rate=0.0295, arf fullrun_mos2_xmm0200811001_pi300-10000_pass1_cl_src2.arf
[Fri Jan  6 15:58:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 15:58:19 2012] Updating source flux to 1.1e-12