[Fri Jan  6 12:14:50 2012] Detection parameters:
  Position = (188.0, 450.7) = 4 32 15.99 18 19 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 10.6
  Background counts = 21.3
  Rate = 0.006 +/- 0.001

[Fri Jan  6 12:14:50 2012] Off-axis axis estimate = 13.64'
[Fri Jan  6 12:36:29 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 12:36:29 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Fri Jan  6 12:36:29 2012] source mask rpix=3.0, npix_max = 50, mask sum = 51, frac = 1.014
[Fri Jan  6 12:36:29 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.25"
[Fri Jan  6 12:55:22 2012] fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jan  6 12:55:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_src7.csv
[Fri Jan  6 12:55:22 2012] fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jan  6 12:55:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_src7.csv
[Fri Jan  6 12:55:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 12:55:22 2012] fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jan  6 12:55:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jan  6 12:55:23 2012] fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jan  6 12:55:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jan  6 12:55:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200811001_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 13:21:38 2012] Spatial fit model total counts = 122.606000, observed total counts = 139.000000
[Fri Jan  6 13:21:38 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jan  6 13:21:38 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 13:21:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 13:21:38 2012] Assessing source extent using major
[Fri Jan  6 13:21:38 2012] Source does appear to be extended
[Fri Jan  6 13:21:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 14:01:18 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 14:01:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jan  6 14:01:18 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Fri Jan  6 14:01:18 2012] source mask rpix=3.0, npix_max = 50, mask sum = 51, frac = 1.014
[Fri Jan  6 14:01:18 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.25"
[Fri Jan  6 14:20:51 2012] fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jan  6 14:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_src7.csv
[Fri Jan  6 14:20:51 2012] fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jan  6 14:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_src7.csv
[Fri Jan  6 14:20:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 14:20:51 2012] fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jan  6 14:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jan  6 14:20:51 2012] fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jan  6 14:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jan  6 14:20:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200811001_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 15:00:39 2012] Spatial fit model total counts = 121.717000, observed total counts = 139.000000
[Fri Jan  6 15:00:39 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jan  6 15:00:39 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 15:00:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 15:00:39 2012] Assessing source extent using major
[Fri Jan  6 15:00:39 2012] Source does appear to be extended
[Fri Jan  6 15:00:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 15:24:08 2012] XMMSAS src. selection expression = ellipse(16308.364212, 39166.675659, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jan  6 15:24:08 2012] Writing source region out to fullrun_mos1_xmm0200811001_pi300-10000_pass1_cl_src3_src.reg
[Fri Jan  6 15:24:08 2012] Extracting stamp from image fullrun_mos1_xmm0200811001_pi300-10000_cl_sm2.00.img.gz, (151, 413) - (226, 488)
[Fri Jan  6 15:24:08 2012] XMMSAS bgd. selection expression = annulus(16308.364212, 39166.675659, 1087.500000, 2175.000000, X, Y)
[Fri Jan  6 15:24:08 2012] Writing fullrun_mos1_xmm0200811001_pi300-10000_pass1_cl_src3.gif
[Fri Jan  6 15:27:17 2012] Mean detx,y = (12794.09, -9450.00) 
[Fri Jan  6 15:27:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 15:27:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 15:27:36 2012] Setting source spectrum file to fullrun_mos1_xmm0200811001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan  6 15:27:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200811001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jan  6 15:32:17 2012] Not generating rmf since there are only 55 counts
[Fri Jan  6 15:32:17 2012] rmf not generated due to insufficient counts
[Fri Jan  6 15:57:11 2012] Updating aperture counts using extracted products
[Fri Jan  6 15:57:11 2012] Error reading totcts from fullrun_mos1_xmm0200811001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jan  6 15:57:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan  6 15:57:12 2012] Using photon index=1.80, rate=0.00646, arf fullrun_mos1_xmm0200811001_pi300-10000_pass1_cl_src3.arf
[Fri Jan  6 15:57:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan  6 15:57:12 2012] Updating source flux to 2.2e-13
[Fri Jan  6 15:57:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting