[Tue May 22 04:30:49 2012] Detection parameters:
  Position = (318.7, 371.8) = 4 31 36.11 18 13 43.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.3 +/- 20.8
  Background counts = 89.4
  Rate = 0.01 +/- 0.002

[Tue May 22 04:30:49 2012] Off-axis axis estimate = 5.52'
[Tue May 22 05:24:19 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue May 22 05:24:19 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Tue May 22 05:24:19 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Tue May 22 05:24:19 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.19"
[Tue May 22 05:42:36 2012] fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_src6.ximg exists
[Tue May 22 05:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_src6.csv
[Tue May 22 05:42:36 2012] fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue May 22 05:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_src6.csv
[Tue May 22 05:42:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 05:42:36 2012] fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue May 22 05:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue May 22 05:42:36 2012] fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue May 22 05:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue May 22 05:42:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200810901_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 05:42:46 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.380002 pixels away
[Tue May 22 05:42:46 2012] Vigneting correction estimate = 1.000000
[Tue May 22 05:42:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 05:42:46 2012] Assessing source extent using major
[Tue May 22 05:42:46 2012] Source does appear to be extended
[Tue May 22 05:42:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 06:39:47 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue May 22 06:39:47 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Tue May 22 06:39:47 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Tue May 22 06:39:47 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.19"
[Tue May 22 07:00:34 2012] fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_src6.ximg exists
[Tue May 22 07:00:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_src6.csv
[Tue May 22 07:00:34 2012] fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May 22 07:00:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_src6.csv
[Tue May 22 07:00:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 07:00:34 2012] fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May 22 07:00:34 2012] fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May 22 07:00:34 2012] Fit fullrun_mos2_xmm0200810901_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue May 22 07:00:42 2012] Source 6 is offset by -8.750221 and 4.272039 pixels which is larger than
2 X fitted extent = 8.449196 x 8.449196, not incorporating fit results
[Tue May 22 07:00:42 2012] Vigneting correction estimate = 1.000000
[Tue May 22 07:00:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 07:00:42 2012] Assessing source extent using major
[Tue May 22 07:00:42 2012] Source does appear to be extended
[Tue May 22 07:00:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 07:43:35 2012] XMMSAS src. selection expression = ellipse(27678.310791, 32300.419434, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 22 07:43:35 2012] Writing source region out to fullrun_mos2_xmm0200810901_pi300-10000_pass1_cl_src6_src.reg
[Tue May 22 07:43:35 2012] Extracting stamp from image fullrun_mos2_xmm0200810901_pi300-10000_cl_sm2.00.img.gz, (281, 334) - (356, 409)
[Tue May 22 07:43:35 2012] XMMSAS bgd. selection expression = annulus(27678.310791, 32300.419434, 1087.500000, 2175.000000, X, Y) && !ellipse(26992.811432, 32501.760925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26534.339200, 32546.748600, 360.628810, 360.628810, 0.000000, X, Y)
[Tue May 22 07:43:35 2012] Writing fullrun_mos2_xmm0200810901_pi300-10000_pass1_cl_src6.gif
[Tue May 22 07:49:50 2012] Mean detx,y = (-1084.01, 4605.45) 
[Tue May 22 07:49:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 07:50:08 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 07:50:08 2012] Setting source spectrum file to fullrun_mos2_xmm0200810901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 22 07:50:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200810901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue May 22 08:02:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 22 08:02:18 2012] rmf not generated due to insufficient counts
[Tue May 22 08:02:54 2012] Updating aperture counts using extracted products
[Tue May 22 08:02:54 2012] Error reading totcts from fullrun_mos2_xmm0200810901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May 22 08:02:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 08:02:54 2012] Using photon index=1.80, rate=0.0125, arf fullrun_mos2_xmm0200810901_pi300-10000_pass1_cl_src6.arf
[Tue May 22 08:02:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 08:02:54 2012] Updating source flux to 1.6e-13
[Tue May 22 08:04:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting