[Tue Dec 20 18:23:21 2011] Detection parameters:
  Position = (305.5, 374.2) = 4 31 40.15 18 13 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 351.8 +/- 21.9
  Background counts = 3.1
  Rate = 0.05 +/- 0.003

[Tue Dec 20 18:23:21 2011] Off-axis axis estimate = 5.51'
[Tue Dec 20 19:35:32 2011] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 19:35:32 2011] Initial guess for spatial extent in simple fitting = 9.19"
[Tue Dec 20 19:35:32 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Tue Dec 20 19:35:32 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 9.19"
[Tue Dec 20 20:04:12 2011] fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_src4.ximg exists
[Tue Dec 20 20:04:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_src4.csv
[Tue Dec 20 20:04:12 2011] fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Dec 20 20:04:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_src4.csv
[Tue Dec 20 20:04:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 20:04:12 2011] fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Dec 20 20:04:12 2011] fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Dec 20 20:04:12 2011] Fit fullrun_mos2_xmm0200810701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Dec 20 20:04:23 2011] Warning, spatial fit 4 centroid is now closest to src. 3
[Tue Dec 20 20:04:23 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 20:04:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 20:04:23 2011] Assessing source extent using major
[Tue Dec 20 20:04:23 2011] Source does appear to be extended
[Tue Dec 20 20:04:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 21:23:32 2011] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue Dec 20 21:23:32 2011] Initial guess for spatial extent in simple fitting = 9.19"
[Tue Dec 20 21:23:32 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.916
[Tue Dec 20 21:23:32 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 9.19"
[Tue Dec 20 21:40:05 2011] fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_src4.ximg exists
[Tue Dec 20 21:40:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_src4.csv
[Tue Dec 20 21:40:05 2011] fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Dec 20 21:40:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_src4.csv
[Tue Dec 20 21:40:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 20 21:40:05 2011] fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Dec 20 21:40:05 2011] fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Dec 20 21:40:05 2011] Fit fullrun_mos2_xmm0200810701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Dec 20 21:40:16 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 69.794460 pixels away
[Tue Dec 20 21:40:16 2011] Spatial fit model total counts = 683.742000, observed total counts = 680.000000
[Tue Dec 20 21:40:16 2011] Offset between fit and detection position for source 2 = 4.806393 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 4.806393 pixels
  Position = (310.3, 374.8) = 4 31 38.69 18 13 57.5
  Extent = 18.4 (18.3-18.4)", rotation angle = 0
  Source counts = 675.3 +/- 26.0
  Background counts = 0.0
  Rate = 0.07 +/- 0.003
[Tue Dec 20 21:40:16 2011] Vigneting correction estimate = 1.000000
[Tue Dec 20 21:40:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 20 21:40:16 2011] Assessing source extent using major axis lower bound
[Tue Dec 20 21:40:16 2011] Source does appear to be extended
[Tue Dec 20 21:40:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 20 22:34:44 2011] XMMSAS src. selection expression = ellipse(26948.758000, 32558.304960, 1101.120032, 1101.120032, 0.000000, X, Y)
[Tue Dec 20 22:34:44 2011] Writing source region out to fullrun_mos2_xmm0200810701_pi300-10000_pass1_cl_src2_src.reg
[Tue Dec 20 22:34:44 2011] Extracting stamp from image fullrun_mos2_xmm0200810701_pi300-10000_cl_sm2.00.img.gz, (247, 312) - (374, 438)
[Tue Dec 20 22:34:44 2011] XMMSAS bgd. selection expression = annulus(26948.758000, 32558.304960, 1835.200053, 3670.400106, X, Y) && !ellipse(30771.618400, 35326.376800, 703.732820, 703.732820, 0.000000, X, Y)
[Tue Dec 20 22:34:44 2011] Writing fullrun_mos2_xmm0200810701_pi300-10000_pass1_cl_src2.gif
[Tue Dec 20 22:39:37 2011] Mean detx,y = (-512.55, 4839.55) 
[Tue Dec 20 22:39:40 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 20 22:40:48 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 20 22:40:49 2011] Setting source spectrum file to fullrun_mos2_xmm0200810701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Dec 20 22:40:49 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0200810701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Dec 20 22:56:43 2011] Updating aperture counts using extracted products
[Tue Dec 20 22:56:43 2011] Error reading totcts from fullrun_mos2_xmm0200810701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Dec 20 22:56:43 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 20 22:56:43 2011] Using photon index=1.80, rate=0.0741, arf fullrun_mos2_xmm0200810701_pi300-10000_pass1_cl_src2.arf
[Tue Dec 20 22:56:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 20 22:56:43 2011] Updating source flux to 8.9e-13