[Sun Aug 19 12:14:51 2012] Detection parameters:
  Position = (247.6, 480.3) = 4 31 57.79 18 21 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.6 +/- 10.4
  Background counts = 3.8
  Rate = 0.008 +/- 0.001

[Sun Aug 19 12:14:51 2012] Off-axis axis estimate = 13.69'
[Sun Aug 19 12:39:50 2012] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 12:39:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 12:39:50 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Sun Aug 19 12:39:50 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.971
[Sun Aug 19 12:39:50 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.27"
[Sun Aug 19 13:02:19 2012] fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_src6.ximg exists
[Sun Aug 19 13:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_src6.csv
[Sun Aug 19 13:02:19 2012] fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Aug 19 13:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_src6.csv
[Sun Aug 19 13:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 13:02:19 2012] fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Aug 19 13:02:19 2012] fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Aug 19 13:02:19 2012] Fit fullrun_mos1_xmm0200810401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Aug 19 13:26:28 2012] Spatial fit model total counts = 107.099000, observed total counts = 106.000000
[Sun Aug 19 13:26:28 2012] Offset between fit and detection position for source 10 = 0.580094 pixels
[Sun Aug 19 13:26:28 2012] 107.651900 total counts/ 60.276600 bgd. counts: snr = 6.102076
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.580094 pixels
  Position = (247.1, 480.4) = 4 31 57.97 18 21 37.1
  Extent = 6.5 (4.4-9.9)", rotation angle = 0
  Source counts = 47.4 +/- 10.4
  Background counts = 60.3
  Rate = 0.005 +/- 0.001
[Sun Aug 19 13:26:28 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 13:26:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 13:26:28 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 13:26:28 2012] Source does appear to be extended
[Sun Aug 19 13:26:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 13:51:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 13:51:06 2012] Initial guess for spatial extent in simple fitting = 6.50"
[Sun Aug 19 13:51:06 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.006
[Sun Aug 19 13:51:06 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 6.50"
[Sun Aug 19 14:08:24 2012] fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_src6.ximg exists
[Sun Aug 19 14:08:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_src6.csv
[Sun Aug 19 14:08:24 2012] fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Aug 19 14:08:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_src6.csv
[Sun Aug 19 14:08:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 14:08:24 2012] fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Aug 19 14:08:24 2012] fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Aug 19 14:08:24 2012] Fit fullrun_mos1_xmm0200810401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Aug 19 14:30:05 2012] Spatial fit model total counts = 95.568100, observed total counts = 95.000000
[Sun Aug 19 14:30:05 2012] Offset between fit and detection position for source 10 = 0.044212 pixels
[Sun Aug 19 14:30:05 2012] 95.100000 total counts/ 48.573300 bgd. counts: snr = 6.675802
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.044212 pixels
  Position = (247.1, 480.4) = 4 31 57.96 18 21 37.3
  Extent = 6.4 (4.2-9.5)", rotation angle = 0
  Source counts = 46.5 +/- 9.8
  Background counts = 48.6
  Rate = 0.005 +/- 0.001
[Sun Aug 19 14:30:05 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 14:30:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 14:30:05 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 14:30:05 2012] Source does appear to be extended
[Sun Aug 19 14:30:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 14:56:37 2012] XMMSAS src. selection expression = ellipse(21447.400220, 41750.334200, 381.765011, 381.765011, 0.000000, X, Y)
[Sun Aug 19 14:56:37 2012] Writing source region out to fullrun_mos1_xmm0200810401_pi300-10000_pass1_cl_src10_src.reg
[Sun Aug 19 14:56:37 2012] Extracting stamp from image fullrun_mos1_xmm0200810401_pi300-10000_cl_sm2.00.img.gz, (225, 459) - (269, 502)
[Sun Aug 19 14:56:37 2012] XMMSAS bgd. selection expression = annulus(21447.400220, 41750.334200, 636.275018, 1272.550037, X, Y)
[Sun Aug 19 14:56:37 2012] Writing fullrun_mos1_xmm0200810401_pi300-10000_pass1_cl_src10.gif
[Sun Aug 19 15:00:03 2012] Mean detx,y = (14846.89, -3955.28) 
[Sun Aug 19 15:00:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 15:00:19 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 15:00:19 2012] Setting source spectrum file to fullrun_mos1_xmm0200810401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Aug 19 15:00:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200810401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Aug 19 15:16:35 2012] Not generating rmf since there are only 46 counts
[Sun Aug 19 15:16:35 2012] rmf not generated due to insufficient counts
[Sun Aug 19 15:29:30 2012] Updating aperture counts using extracted products
[Sun Aug 19 15:29:30 2012] Error reading totcts from fullrun_mos1_xmm0200810401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Aug 19 15:29:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 15:29:30 2012] Using photon index=1.80, rate=0.0054, arf fullrun_mos1_xmm0200810401_pi300-10000_pass1_cl_src10.arf
[Sun Aug 19 15:29:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 15:29:30 2012] Updating source flux to 1.6e-13
[Sun Aug 19 15:29:33 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting