[Fri Aug  3 22:04:31 2012] Detection parameters:
  Position = (226.8, 218.7) = 0 38 13.37 -33 49 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.4 +/- 12.1
  Background counts = 25.1
  Rate = 0.003 +/- 0.0006

[Fri Aug  3 22:04:31 2012] Off-axis axis estimate = 7.77'
[Fri Aug  3 23:39:26 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 23:39:26 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Fri Aug  3 23:39:26 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.092
[Fri Aug  3 23:39:26 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.31"
[Sat Aug  4 00:10:52 2012] fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_src14.ximg exists
[Sat Aug  4 00:10:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_src14.csv
[Sat Aug  4 00:10:52 2012] fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Aug  4 00:10:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_src14.csv
[Sat Aug  4 00:10:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 00:10:52 2012] fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Aug  4 00:10:52 2012] fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Aug  4 00:10:52 2012] Fit fullrun_mos2_xmm0200800101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Aug  4 00:11:09 2012] Spatial fit model total counts = 216.998000, observed total counts = 217.000000
[Sat Aug  4 00:11:09 2012] Offset between fit and detection position for source 28 = 0.272325 pixels
[Sat Aug  4 00:11:09 2012] 220.510100 total counts/ 179.286000 bgd. counts: snr = 3.078775
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.272325 pixels
  Position = (227.1, 218.8) = 0 38 13.28 -33 49 29.0
  Extent = 5.6 (3.6-8.2)", rotation angle = 0
  Source counts = 41.2 +/- 14.8
  Background counts = 179.3
  Rate = 0.001 +/- 0.0004
[Sat Aug  4 00:11:09 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 00:11:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 00:11:09 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 00:11:09 2012] Source does appear to be extended
[Sat Aug  4 00:11:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 01:38:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 01:38:51 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Sat Aug  4 01:38:51 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.254
[Sat Aug  4 01:38:51 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 5.59"
[Sat Aug  4 02:08:12 2012] fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_src13.ximg exists
[Sat Aug  4 02:08:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_src13.csv
[Sat Aug  4 02:08:12 2012] fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Aug  4 02:08:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_src13.csv
[Sat Aug  4 02:08:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 02:08:12 2012] fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Aug  4 02:08:12 2012] fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Aug  4 02:08:12 2012] Fit fullrun_mos2_xmm0200800101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Aug  4 02:08:31 2012] Spatial fit model total counts = 211.998000, observed total counts = 212.000000
[Sat Aug  4 02:08:31 2012] Offset between fit and detection position for source 28 = 0.047685 pixels
[Sat Aug  4 02:08:31 2012] 216.290400 total counts/ 172.986000 bgd. counts: snr = 3.292506
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.047685 pixels
  Position = (227.1, 218.8) = 0 38 13.27 -33 49 29.2
  Extent = 5.7 (4.0-8.6)", rotation angle = 0
  Source counts = 43.3 +/- 14.7
  Background counts = 173.0
  Rate = 0.001 +/- 0.0004
[Sat Aug  4 02:08:31 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 02:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 02:08:31 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 02:08:31 2012] Source does appear to be extended
[Sat Aug  4 02:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 03:47:50 2012] XMMSAS src. selection expression = ellipse(19708.706380, 18983.017200, 344.025610, 344.025610, 0.000000, X, Y)
[Sat Aug  4 03:47:50 2012] Writing source region out to fullrun_mos2_xmm0200800101_pi300-10000_pass1_cl_src28_src.reg
[Sat Aug  4 03:47:50 2012] Extracting stamp from image fullrun_mos2_xmm0200800101_pi300-10000_cl_sm2.00.img.gz, (207, 199) - (247, 239)
[Sat Aug  4 03:47:50 2012] XMMSAS bgd. selection expression = annulus(19708.706380, 18983.017200, 573.376016, 1146.752033, X, Y)
[Sat Aug  4 03:47:50 2012] Writing fullrun_mos2_xmm0200800101_pi300-10000_pass1_cl_src28.gif
[Sat Aug  4 03:50:56 2012] Mean detx,y = (3351.55, -10679.65) 
[Sat Aug  4 03:50:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 03:51:04 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 03:51:04 2012] Setting source spectrum file to fullrun_mos2_xmm0200800101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Aug  4 03:51:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200800101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Aug  4 04:06:13 2012] Not generating rmf since there are only 43 counts
[Sat Aug  4 04:06:13 2012] rmf not generated due to insufficient counts
[Sat Aug  4 04:08:15 2012] Updating aperture counts using extracted products
[Sat Aug  4 04:08:15 2012] Error reading totcts from fullrun_mos2_xmm0200800101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Aug  4 04:08:16 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 04:08:16 2012] Using photon index=1.80, rate=0.00125, arf fullrun_mos2_xmm0200800101_pi300-10000_pass1_cl_src28.arf
[Sat Aug  4 04:08:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 04:08:16 2012] Updating source flux to 2.8e-14
[Sat Aug  4 04:08:42 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting