[Wed Apr 11 00:12:56 2012] Detection parameters:
  Position = (430.7, 359.0) = 20 33 21.88 60 13 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218.2 +/- 20.3
  Background counts = 54.6
  Rate = 0.01 +/- 0.001

[Wed Apr 11 00:12:57 2012] Off-axis axis estimate = 10.55'
[Wed Apr 11 00:13:10 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:13:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 00:13:10 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Wed Apr 11 00:13:10 2012] source mask rpix=2.7, npix_max = 40, mask sum = 38, frac = 0.934
[Wed Apr 11 00:13:10 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.70"
[Wed Apr 11 00:13:10 2012] fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_src5.ximg exists
[Wed Apr 11 00:13:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_src5.csv
[Wed Apr 11 00:13:10 2012] fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Apr 11 00:13:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_src5.csv
[Wed Apr 11 00:13:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:13:11 2012] fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Apr 11 00:13:11 2012] fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Apr 11 00:13:11 2012] Fit fullrun_mos1_xmm0200670401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Apr 11 00:13:17 2012] Spatial fit model total counts = 220.087000, observed total counts = 222.000000
[Wed Apr 11 00:13:17 2012] Offset between fit and detection position for source 3 = 0.348134 pixels
[Wed Apr 11 00:13:17 2012] 216.630400 total counts/ 127.657000 bgd. counts: snr = 7.874770
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.348134 pixels
  Position = (430.5, 358.8) = 20 33 21.99 60 13 54.4
  Extent = 6.7 (5.2-9.3)", rotation angle = 0
  Source counts = 89.0 +/- 14.7
  Background counts = 127.7
  Rate = 0.008 +/- 0.001
[Wed Apr 11 00:13:17 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:13:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:13:17 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:13:17 2012] Source does appear to be extended
[Wed Apr 11 00:13:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:13:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:13:26 2012] Initial guess for spatial extent in simple fitting = 6.73"
[Wed Apr 11 00:13:26 2012] source mask rpix=1.5, npix_max = 16, mask sum = 18, frac = 1.073
[Wed Apr 11 00:13:26 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.73"
[Wed Apr 11 00:13:27 2012] fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_src4.ximg exists
[Wed Apr 11 00:13:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_src4.csv
[Wed Apr 11 00:13:27 2012] fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Apr 11 00:13:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_src4.csv
[Wed Apr 11 00:13:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:13:27 2012] fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Apr 11 00:13:27 2012] fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Apr 11 00:13:27 2012] Fit fullrun_mos1_xmm0200670401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Apr 11 00:13:32 2012] Spatial fit model total counts = 215.997000, observed total counts = 216.000000
[Wed Apr 11 00:13:32 2012] Offset between fit and detection position for source 3 = 0.052862 pixels
[Wed Apr 11 00:13:32 2012] 212.654800 total counts/ 125.873000 bgd. counts: snr = 7.735036
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.052862 pixels
  Position = (430.5, 358.8) = 20 33 21.99 60 13 54.6
  Extent = 6.5 (5.0-8.7)", rotation angle = 0
  Source counts = 86.8 +/- 14.6
  Background counts = 125.9
  Rate = 0.008 +/- 0.001
[Wed Apr 11 00:13:32 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:13:32 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:13:32 2012] Source does appear to be extended
[Wed Apr 11 00:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:13:42 2012] XMMSAS src. selection expression = ellipse(37403.755400, 31167.476800, 390.694811, 390.694811, 0.000000, X, Y)
[Wed Apr 11 00:13:42 2012] Not overwriting source region fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_src.reg
[Wed Apr 11 00:13:42 2012] Extracting stamp from image fullrun_mos1_xmm0200670401_pi300-10000_cl_sm2.00.img.gz, (408, 336) - (453, 381)
[Wed Apr 11 00:13:42 2012] XMMSAS bgd. selection expression = annulus(37403.755400, 31167.476800, 651.158019, 1302.316037, X, Y)
[Wed Apr 11 00:13:42 2012] Writing fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3.gif
[Wed Apr 11 00:13:42 2012] ../../xmm0200670401/products/events/fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0200670401/products/events/fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Apr 11 00:13:42 2012] Mean detx,y = (-13146.18, -5977.01) 
[Wed Apr 11 00:13:42 2012] ../../xmm0200670401/products/images/fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_src.img and ../../xmm0200670401/products/images/fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Apr 11 00:13:42 2012] ../../xmm0200670401/products/spectra/fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0200670401/products/spectra/fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Apr 11 00:13:42 2012] Setting source spectrum file to fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 00:13:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Apr 11 00:13:42 2012] ../../xmm0200670401/products/lightcurves/fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0200670401/products/lightcurves/fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Apr 11 00:13:43 2012] Not generating rmf since there are only 86 counts
[Wed Apr 11 00:13:43 2012] rmf not generated due to insufficient counts
[Wed Apr 11 00:13:43 2012] fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Wed Apr 11 00:14:16 2012] Updating aperture counts using extracted products
[Wed Apr 11 00:14:16 2012] Error reading totcts from fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Apr 11 00:14:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 00:14:16 2012] Using photon index=1.80, rate=0.0081, arf fullrun_mos1_xmm0200670401_pi300-10000_pass1_cl_src3.arf
[Wed Apr 11 00:14:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 00:14:16 2012] Updating source flux to 2.5e-13
[Wed Apr 11 00:14:19 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting