[Wed Sep 28 02:05:39 2011] Detection parameters:
  Position = (310.6, 386.3) = 4 48 29.72 -6 11 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.1 +/- 13.6
  Background counts = 5.8
  Rate = 0.02 +/- 0.002

[Wed Sep 28 02:05:40 2011] Off-axis axis estimate = 6.43'
[Wed Sep 28 02:29:52 2011] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 02:29:52 2011] Initial guess for spatial extent in simple fitting = 9.64"
[Wed Sep 28 02:29:52 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.847
[Wed Sep 28 02:29:52 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.64"
[Wed Sep 28 02:39:12 2011] fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 02:39:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 02:39:12 2011] fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 02:39:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 02:39:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 02:39:12 2011] fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 02:39:12 2011] fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 02:39:12 2011] Fit fullrun_mos2_xmm0200660401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 02:39:19 2011] Spatial fit model total counts = 199.726000, observed total counts = 200.000000
[Wed Sep 28 02:39:19 2011] Offset between fit and detection position for source 2 = 0.370045 pixels
[Wed Sep 28 02:39:19 2011] 201.336100 total counts/ 113.367000 bgd. counts: snr = 8.262031
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.370045 pixels
  Position = (310.2, 386.4) = 4 48 29.83 -6 11 21.5
  Extent = 5.8 (4.3-6.9)", rotation angle = 0
  Source counts = 88.0 +/- 14.2
  Background counts = 113.4
  Rate = 0.009 +/- 0.001
[Wed Sep 28 02:39:19 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 02:39:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 02:39:19 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 02:39:19 2011] Source does appear to be extended
[Wed Sep 28 02:39:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 02:59:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 02:59:43 2011] Initial guess for spatial extent in simple fitting = 5.77"
[Wed Sep 28 02:59:43 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.898
[Wed Sep 28 02:59:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.77"
[Wed Sep 28 03:06:17 2011] fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 03:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 03:06:17 2011] fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 03:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 03:06:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 03:06:17 2011] fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 03:06:17 2011] fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 03:06:17 2011] Fit fullrun_mos2_xmm0200660401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 03:06:25 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Wed Sep 28 03:06:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 03:06:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 03:06:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 03:06:25 2011] Source does appear to be extended
[Wed Sep 28 03:06:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 03:23:33 2011] XMMSAS src. selection expression = ellipse(26941.953400, 33567.040600, 346.455610, 346.455610, 0.000000, X, Y)
[Wed Sep 28 03:23:33 2011] Writing source region out to fullrun_mos2_xmm0200660401_pi300-10000_pass1_cl_src2_src.reg
[Wed Sep 28 03:23:33 2011] Extracting stamp from image fullrun_mos2_xmm0200660401_pi300-10000_cl_sm2.00.img.gz, (290, 366) - (330, 406)
[Wed Sep 28 03:23:33 2011] XMMSAS bgd. selection expression = annulus(26941.953400, 33567.040600, 577.426017, 1154.852033, X, Y)
[Wed Sep 28 03:23:33 2011] Writing fullrun_mos2_xmm0200660401_pi300-10000_pass1_cl_src2.gif
[Wed Sep 28 03:23:35 2011] Mean detx,y = (2306.12, -9275.32) 
[Wed Sep 28 03:23:37 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 03:23:46 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 03:23:46 2011] Setting source spectrum file to fullrun_mos2_xmm0200660401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Sep 28 03:23:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0200660401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Sep 28 03:25:21 2011] Not generating rmf since there are only 87 counts
[Wed Sep 28 03:25:21 2011] rmf not generated due to insufficient counts
[Wed Sep 28 03:29:50 2011] Updating aperture counts using extracted products
[Wed Sep 28 03:29:50 2011] Error reading totcts from fullrun_mos2_xmm0200660401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Sep 28 03:29:51 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 03:29:51 2011] Using photon index=1.80, rate=0.00867, arf fullrun_mos2_xmm0200660401_pi300-10000_pass1_cl_src2.arf
[Wed Sep 28 03:29:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 03:29:51 2011] Updating source flux to 1.6e-13
[Wed Sep 28 03:30:03 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 03:30:23 2011] xmm0200660401/analysis//spectral/fullrun_mos2_xmm0200660401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete