[Mon Jul 30 10:13:59 2012] Detection parameters:
  Position = (382.4, 263.9) = 23 27 26.38 8 45 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.2 +/- 15.8
  Background counts = 15.1
  Rate = 0.03 +/- 0.003

[Mon Jul 30 10:14:00 2012] Off-axis axis estimate = 6.58'
[Mon Jul 30 10:40:06 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 10:40:06 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Mon Jul 30 10:40:06 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.003
[Mon Jul 30 10:40:06 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.72"
[Mon Jul 30 11:00:54 2012] fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul 30 11:00:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_src3.csv
[Mon Jul 30 11:00:54 2012] fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul 30 11:00:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_src3.csv
[Mon Jul 30 11:00:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 11:00:54 2012] fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul 30 11:00:54 2012] fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul 30 11:00:54 2012] Fit fullrun_mos1_xmm0200660101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jul 30 11:11:18 2012] Spatial fit model total counts = 198.934000, observed total counts = 200.000000
[Mon Jul 30 11:11:18 2012] Offset between fit and detection position for source 3 = 0.312796 pixels
[Mon Jul 30 11:11:18 2012] 198.934900 total counts/ 121.170000 bgd. counts: snr = 7.064575
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.312796 pixels
  Position = (382.1, 263.8) = 23 27 26.46 8 45 14.3
  Extent = 4.9 (4.0-6.2)", rotation angle = 0
  Source counts = 77.8 +/- 14.1
  Background counts = 121.2
  Rate = 0.009 +/- 0.002
[Mon Jul 30 11:11:18 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 11:11:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 11:11:18 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 11:11:18 2012] Source does appear to be extended
[Mon Jul 30 11:11:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 11:31:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 30 11:31:29 2012] Initial guess for spatial extent in simple fitting = 4.95"
[Mon Jul 30 11:31:29 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.118
[Mon Jul 30 11:31:29 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.95"
[Mon Jul 30 11:51:45 2012] fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul 30 11:51:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_src3.csv
[Mon Jul 30 11:51:45 2012] fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul 30 11:51:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_src3.csv
[Mon Jul 30 11:51:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 11:51:45 2012] fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul 30 11:51:45 2012] fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul 30 11:51:45 2012] Fit fullrun_mos1_xmm0200660101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul 30 12:02:22 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Mon Jul 30 12:02:22 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 12:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 12:02:22 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 12:02:22 2012] Source does appear to be extended
[Mon Jul 30 12:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 12:24:46 2012] XMMSAS src. selection expression = ellipse(33192.268760, 22900.292800, 296.949009, 296.949009, 0.000000, X, Y)
[Mon Jul 30 12:24:46 2012] Writing source region out to fullrun_mos1_xmm0200660101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jul 30 12:24:46 2012] Extracting stamp from image fullrun_mos1_xmm0200660101_pi300-10000_cl_sm2.00.img.gz, (365, 247) - (399, 281)
[Mon Jul 30 12:24:46 2012] XMMSAS bgd. selection expression = annulus(33192.268760, 22900.292800, 494.915014, 989.830028, X, Y)
[Mon Jul 30 12:24:46 2012] Writing fullrun_mos1_xmm0200660101_pi300-10000_pass1_cl_src3.gif
[Mon Jul 30 12:25:28 2012] Mean detx,y = (-1207.18, -9241.05) 
[Mon Jul 30 12:25:29 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 12:25:36 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 12:25:37 2012] Setting source spectrum file to fullrun_mos1_xmm0200660101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 30 12:25:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200660101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jul 30 12:35:29 2012] Not generating rmf since there are only 77 counts
[Mon Jul 30 12:35:29 2012] rmf not generated due to insufficient counts
[Mon Jul 30 12:46:18 2012] Updating aperture counts using extracted products
[Mon Jul 30 12:46:18 2012] Error reading totcts from fullrun_mos1_xmm0200660101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 30 12:46:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 12:46:19 2012] Using photon index=1.80, rate=0.00929, arf fullrun_mos1_xmm0200660101_pi300-10000_pass1_cl_src3.arf
[Mon Jul 30 12:46:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 12:46:19 2012] Updating source flux to 2.2e-13
[Mon Jul 30 12:46:21 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting