[Tue Apr 10 17:27:35 2012] Detection parameters:
  Position = (314.7, 279.9) = 12 36 44.17 13 10 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.5 +/- 20.3
  Background counts = 148.3
  Rate = 0.002 +/- 0.0005

[Tue Apr 10 17:27:36 2012] Off-axis axis estimate = 1.79'
[Tue Apr 10 17:27:59 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:27:59 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Apr 10 17:27:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Tue Apr 10 17:27:59 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.32"
[Tue Apr 10 17:28:00 2012] fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_src30.ximg exists
[Tue Apr 10 17:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_src30.csv
[Tue Apr 10 17:28:00 2012] fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Apr 10 17:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_src30.csv
[Tue Apr 10 17:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:01 2012] fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Apr 10 17:28:01 2012] fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Apr 10 17:28:01 2012] Fit fullrun_pn_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Apr 10 17:28:11 2012] Source 31 is offset by -5.993043 and 6.622499 pixels which is larger than
2 X fitted extent = 2.208648 x 2.208648, not incorporating fit results
[Tue Apr 10 17:28:11 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:11 2012] Assessing source extent using major
[Tue Apr 10 17:28:11 2012] Source does appear to be extended
[Tue Apr 10 17:28:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:28:32 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:32 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Apr 10 17:28:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Tue Apr 10 17:28:32 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.32"
[Tue Apr 10 17:28:33 2012] fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_src29.ximg exists
[Tue Apr 10 17:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_src29.csv
[Tue Apr 10 17:28:33 2012] fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Apr 10 17:28:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_src29.csv
[Tue Apr 10 17:28:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:33 2012] fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Apr 10 17:28:33 2012] fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Apr 10 17:28:33 2012] Fit fullrun_pn_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Apr 10 17:28:43 2012] Spatial fit model total counts = 1462.240000, observed total counts = 1456.000000
[Tue Apr 10 17:28:43 2012] Offset between fit and detection position for source 31 = 1.346830 pixels
[Tue Apr 10 17:28:43 2012] 1409.069000 total counts/ 1196.830000 bgd. counts: snr = 6.134921
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.346830 pixels
  Position = (316.0, 280.4) = 12 36 43.80 13 10 14.3
  Extent = 9.8 (8.2-11.8)", rotation angle = 0
  Source counts = 212.2 +/- 37.5
  Background counts = 1196.8
  Rate = 0.004 +/- 0.0007
[Tue Apr 10 17:28:43 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:43 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:28:43 2012] Source does appear to be extended
[Tue Apr 10 17:28:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:29:03 2012] XMMSAS src. selection expression = ellipse(27443.601600, 24343.218000, 587.524817, 587.524817, 0.000000, X, Y)
[Tue Apr 10 17:29:03 2012] Not overwriting source region fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_src.reg
[Tue Apr 10 17:29:03 2012] Extracting stamp from image fullrun_pn_xmm0200650101_pi300-10000_cl_sm2.00.img.gz, (282, 247) - (350, 314)
[Tue Apr 10 17:29:03 2012] XMMSAS bgd. selection expression = annulus(27443.601600, 24343.218000, 979.208028, 1958.416056, X, Y) && !ellipse(25626.588900, 23761.205400, 596.130417, 541.891216, 82.043870, X, Y) && !ellipse(25630.117800, 26448.225200, 432.155212, 432.155212, 0.000000, X, Y) && !ellipse(28611.684200, 25994.016000, 337.320810, 337.320810, 0.000000, X, Y) && !ellipse(29078.670740, 25054.367000, 373.800011, 373.800011, 0.000000, X, Y) && !ellipse(26660.274622, 25143.491800, 421.472012, 421.472012, 0.000000, X, Y) && !ellipse(25583.990000, 24278.990000, 1109.016032, 1109.016032, 0.000000, X, Y) && !ellipse(26143.340118, 24730.479553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30060.562378, 22549.850891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28215.075560, 22809.837200, 739.508415, 739.508415, 0.000000, X, Y) && !ellipse(26286.951800, 22538.656200, 819.560024, 538.227215, 99.448741, X, Y)
[Tue Apr 10 17:29:03 2012] Writing fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31.gif
[Tue Apr 10 17:29:06 2012] ../../xmm0200650101/products/events/fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0200650101/products/events/fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Tue Apr 10 17:29:06 2012] Mean detx,y = (-1602.10, -560.61) 
[Tue Apr 10 17:29:06 2012] ../../xmm0200650101/products/images/fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_src.img and ../../xmm0200650101/products/images/fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Tue Apr 10 17:29:06 2012] ../../xmm0200650101/products/spectra/fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0200650101/products/spectra/fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Tue Apr 10 17:29:06 2012] Setting source spectrum file to fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Apr 10 17:29:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Apr 10 17:29:06 2012] ../../xmm0200650101/products/lightcurves/fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0200650101/products/lightcurves/fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Tue Apr 10 17:29:10 2012] fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31.rmf exists, delete to re-create
[Tue Apr 10 17:29:10 2012] fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Tue Apr 10 17:29:55 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:29:55 2012] Error reading totcts from fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Apr 10 17:29:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:29:55 2012] Using photon index=1.80, rate=0.00417, arf fullrun_pn_xmm0200650101_pi300-10000_pass1_cl_src31.arf
[Tue Apr 10 17:29:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:29:55 2012] Updating source flux to 1.3e-14
[Tue Apr 10 17:30:02 2012] Flag b found in src. 31 procflags, skipping spectral fitting