[Tue Apr 10 17:27:37 2012] Detection parameters:
  Position = (302.0, 259.0) = 12 36 47.98 13 8 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.5 +/- 19.2
  Background counts = 39.5
  Rate = 0.004 +/- 0.0004

[Tue Apr 10 17:27:37 2012] Off-axis axis estimate = 2.87'
[Tue Apr 10 17:28:02 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:02 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Tue Apr 10 17:28:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.751
[Tue Apr 10 17:28:02 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.86"
[Tue Apr 10 17:28:02 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src11.ximg exists
[Tue Apr 10 17:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src11.csv
[Tue Apr 10 17:28:02 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Apr 10 17:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src11.csv
[Tue Apr 10 17:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Apr 10 17:28:03 2012] Fit fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Apr 10 17:28:19 2012] Spatial fit model total counts = 651.506000, observed total counts = 652.000000
[Tue Apr 10 17:28:19 2012] Offset between fit and detection position for source 29 = 0.189249 pixels
[Tue Apr 10 17:28:19 2012] 672.486000 total counts/ 554.698000 bgd. counts: snr = 5.001183
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.189249 pixels
  Position = (302.1, 258.8) = 12 36 47.94 13 8 40.7
  Extent = 5.5 (4.6-6.4)", rotation angle = 0
  Source counts = 117.8 +/- 25.9
  Background counts = 554.7
  Rate = 0.002 +/- 0.0005
[Tue Apr 10 17:28:19 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:19 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:28:19 2012] Source does appear to be extended
[Tue Apr 10 17:28:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:28:19 2012] Source is confused with source 26
[Tue Apr 10 17:28:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:34 2012] Initial guess for spatial extent in simple fitting = 5.45"
[Tue Apr 10 17:28:34 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.300
[Tue Apr 10 17:28:34 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 5.45"
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src11.ximg exists
[Tue Apr 10 17:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src11.csv
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Apr 10 17:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src11.csv
[Tue Apr 10 17:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Apr 10 17:28:35 2012] Fit fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Apr 10 17:28:51 2012] Spatial fit model total counts = 656.792000, observed total counts = 652.000000
[Tue Apr 10 17:28:51 2012] Offset between fit and detection position for source 29 = 0.001336 pixels
[Tue Apr 10 17:28:51 2012] 678.387000 total counts/ 561.916000 bgd. counts: snr = 4.913400
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.001336 pixels
  Position = (302.1, 258.8) = 12 36 47.94 13 8 40.7
  Extent = 5.5 (4.6-6.4)", rotation angle = 0
  Source counts = 116.5 +/- 26.0
  Background counts = 561.9
  Rate = 0.002 +/- 0.0005
[Tue Apr 10 17:28:51 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:51 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:28:51 2012] Source does appear to be extended
[Tue Apr 10 17:28:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:29:13 2012] XMMSAS src. selection expression = ellipse(26234.812140, 22471.236600, 328.020009, 328.020009, 0.000000, X, Y)
[Tue Apr 10 17:29:13 2012] Not overwriting source region fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_src.reg
[Tue Apr 10 17:29:13 2012] Extracting stamp from image fullrun_mos2_xmm0200650101_pi300-10000_cl_sm2.00.img.gz, (283, 240) - (321, 278)
[Tue Apr 10 17:29:13 2012] XMMSAS bgd. selection expression = annulus(26234.812140, 22471.236600, 546.700016, 1093.400031, X, Y) && !ellipse(25625.361580, 23763.421000, 534.264015, 534.264015, 0.000000, X, Y) && !ellipse(25349.468600, 24338.810000, 1120.240032, 1120.240032, 0.000000, X, Y) && !ellipse(26311.904000, 22482.516000, 1222.176035, 1222.176035, 0.000000, X, Y)
[Tue Apr 10 17:29:13 2012] Writing fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29.gif
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/events/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0200650101/products/events/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Tue Apr 10 17:29:14 2012] Mean detx,y = (-68.28, 1570.44) 
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/images/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_src.img and ../../xmm0200650101/products/images/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/spectra/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0200650101/products/spectra/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Tue Apr 10 17:29:14 2012] Setting source spectrum file to fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Apr 10 17:29:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/lightcurves/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0200650101/products/lightcurves/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Tue Apr 10 17:29:16 2012] fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29.rmf exists, delete to re-create
[Tue Apr 10 17:29:16 2012] fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Tue Apr 10 17:29:56 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:29:56 2012] Error reading totcts from fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Apr 10 17:29:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:29:57 2012] Using photon index=1.80, rate=0.00211, arf fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src29.arf
[Tue Apr 10 17:29:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:29:57 2012] Updating source flux to 2.5e-14
[Tue Apr 10 17:30:01 2012] Flag c found in src. 29 procflags, skipping spectral fitting