[Tue Apr 10 17:27:37 2012] Detection parameters:
  Position = (298.8, 265.1) = 12 36 48.92 13 9 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.9 +/- 16.3
  Background counts = 40.1
  Rate = 0.002 +/- 0.0003

[Tue Apr 10 17:27:37 2012] Off-axis axis estimate = 2.42'
[Tue Apr 10 17:28:02 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:02 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Tue Apr 10 17:28:02 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Tue Apr 10 17:28:02 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.64"
[Tue Apr 10 17:28:02 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src25.ximg exists
[Tue Apr 10 17:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src25.csv
[Tue Apr 10 17:28:02 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src25_1.ximg exists
[Tue Apr 10 17:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src25.csv
[Tue Apr 10 17:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Tue Apr 10 17:28:03 2012] Fit fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Tue Apr 10 17:28:19 2012] Warning, spatial fit 25 centroid is now closest to src. 4
[Tue Apr 10 17:28:19 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:19 2012] Assessing source extent using major
[Tue Apr 10 17:28:19 2012] Source does appear to be extended
[Tue Apr 10 17:28:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:28:19 2012] Source is confused with source 29
[Tue Apr 10 17:28:34 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:34 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Tue Apr 10 17:28:34 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Tue Apr 10 17:28:34 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.64"
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src25.ximg exists
[Tue Apr 10 17:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src25.csv
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Apr 10 17:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src25.csv
[Tue Apr 10 17:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Apr 10 17:28:35 2012] Fit fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Tue Apr 10 17:28:51 2012] Spatial fit model total counts = 1299.730000, observed total counts = 1310.000000
[Tue Apr 10 17:28:51 2012] Offset between fit and detection position for source 26 = 7.394922 pixels
[Tue Apr 10 17:28:51 2012] 1368.690000 total counts/ 702.860000 bgd. counts: snr = 25.114755
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 7.394922 pixels
  Position = (303.0, 259.0) = 12 36 47.67 13 8 41.3
  Extent = 15.3 (15.2-30.6)", rotation angle = 0
  Source counts = 665.8 +/- 37.0
  Background counts = 702.9
  Rate = 0.01 +/- 0.0007
[Tue Apr 10 17:28:51 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:51 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:28:51 2012] Source does appear to be extended
[Tue Apr 10 17:28:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:29:14 2012] XMMSAS src. selection expression = ellipse(26311.904000, 22482.516000, 916.632026, 916.632026, 0.000000, X, Y)
[Tue Apr 10 17:29:14 2012] Not overwriting source region fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_src.reg
[Tue Apr 10 17:29:14 2012] Extracting stamp from image fullrun_mos2_xmm0200650101_pi300-10000_cl_sm2.00.img.gz, (250, 206) - (356, 312)
[Tue Apr 10 17:29:14 2012] XMMSAS bgd. selection expression = annulus(26311.904000, 22482.516000, 1527.720044, 3055.440088, X, Y) && !ellipse(25625.361580, 23763.421000, 534.264015, 534.264015, 0.000000, X, Y) && !ellipse(26640.710200, 25145.583000, 364.100010, 364.100010, 0.000000, X, Y) && !ellipse(26234.812140, 22471.236600, 437.360013, 437.360013, 0.000000, X, Y) && !ellipse(28461.819600, 24208.139600, 385.368811, 241.960007, 86.978000, X, Y) && !ellipse(29091.179200, 25038.731600, 308.848809, 308.848809, 0.000000, X, Y) && !ellipse(25349.468600, 24338.810000, 1120.240032, 1120.240032, 0.000000, X, Y) && !ellipse(23613.135680, 22071.264200, 245.917607, 245.917607, 0.000000, X, Y)
[Tue Apr 10 17:29:14 2012] Writing fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26.gif
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/events/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0200650101/products/events/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Tue Apr 10 17:29:14 2012] Mean detx,y = (23.04, 1494.07) 
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/images/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0200650101/products/images/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/spectra/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0200650101/products/spectra/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Tue Apr 10 17:29:14 2012] Setting source spectrum file to fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Apr 10 17:29:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/lightcurves/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0200650101/products/lightcurves/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Tue Apr 10 17:29:16 2012] fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26.rmf exists, delete to re-create
[Tue Apr 10 17:29:16 2012] fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Tue Apr 10 17:29:57 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:29:57 2012] Error reading totcts from fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Apr 10 17:29:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:29:57 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src26.arf
[Tue Apr 10 17:29:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:29:57 2012] Updating source flux to 1.2e-13
[Tue Apr 10 17:30:01 2012] Flag c found in src. 26 procflags, skipping spectral fitting