[Tue Apr 10 17:27:37 2012] Detection parameters:
  Position = (390.8, 116.7) = 12 36 21.55 12 58 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.8 +/- 13.3
  Background counts = 23.5
  Rate = 0.001 +/- 0.0002

[Tue Apr 10 17:27:37 2012] Off-axis axis estimate = 14.78'
[Tue Apr 10 17:28:02 2012] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 17:28:02 2012] Initial guess for spatial extent in simple fitting = 13.82"
[Tue Apr 10 17:28:02 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.906
[Tue Apr 10 17:28:02 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 13.82"
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src34.ximg exists
[Tue Apr 10 17:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src34.csv
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue Apr 10 17:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src34.csv
[Tue Apr 10 17:28:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue Apr 10 17:28:03 2012] Fit fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Tue Apr 10 17:28:19 2012] Warning, spatial fit 34 centroid is now closest to src. 2
[Tue Apr 10 17:28:19 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:19 2012] Assessing source extent using major
[Tue Apr 10 17:28:19 2012] Source does appear to be extended
[Tue Apr 10 17:28:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:28:34 2012] Using EEF radius (= 13.82 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 10 17:28:34 2012] Initial guess for spatial extent in simple fitting = 13.82"
[Tue Apr 10 17:28:34 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.906
[Tue Apr 10 17:28:34 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 13.82"
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src33.ximg exists
[Tue Apr 10 17:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src33.csv
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Apr 10 17:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src33.csv
[Tue Apr 10 17:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Apr 10 17:28:35 2012] Fit fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Apr 10 17:28:51 2012] Spatial fit model total counts = 353.512000, observed total counts = 355.000000
[Tue Apr 10 17:28:51 2012] Offset between fit and detection position for source 11 = 0.869308 pixels
[Tue Apr 10 17:28:51 2012] 344.143000 total counts/ 220.442000 bgd. counts: snr = 8.331554
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.869308 pixels
  Position = (391.6, 116.7) = 12 36 21.29 12 58 22.4
  Extent = 14.7 (10.6-20.2)", rotation angle = 0
  Source counts = 123.7 +/- 18.6
  Background counts = 220.4
  Rate = 0.002 +/- 0.0003
[Tue Apr 10 17:28:51 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:51 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:28:51 2012] Source does appear to be extended
[Tue Apr 10 17:28:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:29:14 2012] XMMSAS src. selection expression = ellipse(34024.336400, 10107.628400, 880.752025, 880.752025, 0.000000, X, Y)
[Tue Apr 10 17:29:14 2012] Not overwriting source region fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_src.reg
[Tue Apr 10 17:29:14 2012] Extracting stamp from image fullrun_mos2_xmm0200650101_pi300-10000_cl_sm2.00.img.gz, (341, 66) - (442, 167)
[Tue Apr 10 17:29:14 2012] XMMSAS bgd. selection expression = annulus(34024.336400, 10107.628400, 1467.920042, 2935.840084, X, Y) && !ellipse(32798.956940, 10502.270477, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 17:29:14 2012] Writing fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11.gif
[Tue Apr 10 17:29:15 2012] ../../xmm0200650101/products/events/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0200650101/products/events/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Apr 10 17:29:15 2012] Mean detx,y = (1234.16, 16025.17) 
[Tue Apr 10 17:29:15 2012] ../../xmm0200650101/products/images/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_src.img and ../../xmm0200650101/products/images/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Apr 10 17:29:15 2012] ../../xmm0200650101/products/spectra/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0200650101/products/spectra/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Apr 10 17:29:15 2012] Setting source spectrum file to fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Apr 10 17:29:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Apr 10 17:29:15 2012] ../../xmm0200650101/products/lightcurves/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0200650101/products/lightcurves/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Apr 10 17:29:16 2012] fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11.rmf exists, delete to re-create
[Tue Apr 10 17:29:16 2012] fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Tue Apr 10 17:29:57 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:29:57 2012] Error reading totcts from fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Apr 10 17:29:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:29:58 2012] Using photon index=1.80, rate=0.00224, arf fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src11.arf
[Tue Apr 10 17:29:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:29:58 2012] Updating source flux to 6.9e-14