[Tue Apr 10 17:27:37 2012] Detection parameters:
  Position = (202.8, 372.8) = 12 37 17.52 13 16 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 470.6 +/- 26.7
  Background counts = 21.9
  Rate = 0.01 +/- 0.0008

[Tue Apr 10 17:27:37 2012] Off-axis axis estimate = 8.78'
[Tue Apr 10 17:28:02 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:02 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Tue Apr 10 17:28:02 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.009
[Tue Apr 10 17:28:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.82"
[Tue Apr 10 17:28:02 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Apr 10 17:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src3.csv
[Tue Apr 10 17:28:02 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Apr 10 17:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src3.csv
[Tue Apr 10 17:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Apr 10 17:28:03 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Apr 10 17:28:03 2012] Fit fullrun_mos2_xmm0200650101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Apr 10 17:28:19 2012] Spatial fit model total counts = 616.889000, observed total counts = 618.000000
[Tue Apr 10 17:28:19 2012] Offset between fit and detection position for source 1 = 0.228845 pixels
[Tue Apr 10 17:28:19 2012] 618.911000 total counts/ 289.961000 bgd. counts: snr = 19.317908
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.228845 pixels
  Position = (202.7, 372.6) = 12 37 17.54 13 16 55.4
  Extent = 5.9 (5.3-6.6)", rotation angle = 0
  Source counts = 328.9 +/- 24.9
  Background counts = 290.0
  Rate = 0.006 +/- 0.0004
[Tue Apr 10 17:28:19 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:19 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:28:19 2012] Source does appear to be extended
[Tue Apr 10 17:28:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:28:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 17:28:34 2012] Initial guess for spatial extent in simple fitting = 5.92"
[Tue Apr 10 17:28:34 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.866
[Tue Apr 10 17:28:34 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.92"
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Apr 10 17:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src3.csv
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Apr 10 17:28:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src3.csv
[Tue Apr 10 17:28:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Apr 10 17:28:35 2012] fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Apr 10 17:28:35 2012] Fit fullrun_mos2_xmm0200650101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Apr 10 17:28:51 2012] Warning, spatial fit 3 centroid is now closest to src. 12
[Tue Apr 10 17:28:51 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 17:28:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 17:28:51 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 17:28:51 2012] Source does appear to be extended
[Tue Apr 10 17:28:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 17:29:13 2012] XMMSAS src. selection expression = ellipse(17590.325000, 32366.857800, 355.316410, 355.316410, 0.000000, X, Y)
[Tue Apr 10 17:29:13 2012] Not overwriting source region fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_src.reg
[Tue Apr 10 17:29:13 2012] Extracting stamp from image fullrun_mos2_xmm0200650101_pi300-10000_cl_sm2.00.img.gz, (182, 352) - (223, 393)
[Tue Apr 10 17:29:13 2012] XMMSAS bgd. selection expression = annulus(17590.325000, 32366.857800, 592.194017, 1184.388034, X, Y)
[Tue Apr 10 17:29:13 2012] Writing fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1.gif
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/events/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0200650101/products/events/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Apr 10 17:29:14 2012] Mean detx,y = (-3320.84, -11143.22) 
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/images/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0200650101/products/images/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/spectra/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0200650101/products/spectra/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Apr 10 17:29:14 2012] Setting source spectrum file to fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 17:29:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Apr 10 17:29:14 2012] ../../xmm0200650101/products/lightcurves/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0200650101/products/lightcurves/fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Apr 10 17:29:16 2012] fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Apr 10 17:29:16 2012] fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Apr 10 17:29:56 2012] Updating aperture counts using extracted products
[Tue Apr 10 17:29:56 2012] Error reading totcts from fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Apr 10 17:29:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 17:29:57 2012] Using photon index=1.80, rate=0.00595, arf fullrun_mos2_xmm0200650101_pi300-10000_pass1_cl_src1.arf
[Tue Apr 10 17:29:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 17:29:57 2012] Updating source flux to 1.3e-13