[Mon Mar  5 11:39:02 2012] Detection parameters:
  Position = (463.0, 191.0) = 0 20 44.20 -8 48 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.0 +/- 10.5
  Background counts = 14.2
  Rate = 0.001 +/- 0.0002

[Mon Mar  5 11:39:02 2012] Off-axis axis estimate = 14.25'
[Mon Mar  5 14:44:20 2012] Using EEF radius (= 13.55 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 14:44:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar  5 14:44:20 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Mon Mar  5 14:44:20 2012] source mask rpix=3.1, npix_max = 52, mask sum = 64, frac = 1.224
[Mon Mar  5 14:44:20 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 13.55"
[Mon Mar  5 15:41:02 2012] fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_src31.ximg exists
[Mon Mar  5 15:41:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_src31.csv
[Mon Mar  5 15:41:02 2012] fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Mar  5 15:41:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_src31.csv
[Mon Mar  5 15:41:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 15:41:03 2012] fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Mar  5 15:41:03 2012] fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Mar  5 15:41:03 2012] Fit fullrun_mos2_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Mar  5 15:41:28 2012] Spatial fit model total counts = 250.814000, observed total counts = 246.000000
[Mon Mar  5 15:41:28 2012] Offset between fit and detection position for source 22 = 0.258968 pixels
[Mon Mar  5 15:41:28 2012] 251.369700 total counts/ 229.079000 bgd. counts: snr = 1.472757
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.258968 pixels
  Position = (462.7, 191.0) = 0 20 44.27 -8 48 7.5
  Extent = 3.4" x 3.4", rotation angle = 0
  Source counts = 22.3 +/- 15.9
  Background counts = 229.1
  Rate = 0.0005 +/- 0.0003
  Deleting source due to low Poisson probability