[Mon Mar  5 11:38:35 2012] Detection parameters:
  Position = (353.9, 188.9) = 0 21 16.20 -8 48 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.3 +/- 19.5
  Background counts = 18.3
  Rate = 0.009 +/- 0.0008

[Mon Mar  5 11:38:36 2012] Off-axis axis estimate = 8.90'
[Mon Mar  5 13:48:44 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 13:48:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Mar  5 13:48:44 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Mon Mar  5 13:48:44 2012] source mask rpix=2.5, npix_max = 36, mask sum = 35, frac = 0.972
[Mon Mar  5 13:48:44 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.88"
[Mon Mar  5 14:44:19 2012] fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src4.ximg exists
[Mon Mar  5 14:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src4.csv
[Mon Mar  5 14:44:19 2012] fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Mar  5 14:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src4.csv
[Mon Mar  5 14:44:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 14:44:20 2012] fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Mar  5 14:44:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Mar  5 14:44:20 2012] fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Mar  5 14:44:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Mar  5 14:44:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 15:41:22 2012] Spatial fit model total counts = 450.497000, observed total counts = 398.000000
[Mon Mar  5 15:41:22 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 15:41:22 2012] Spatial fit model total counts = 286.424000, observed total counts = 289.000000
[Mon Mar  5 15:41:22 2012] Offset between fit and detection position for source 4 = 8.899937 pixels
[Mon Mar  5 15:41:22 2012] Warning, changing simple spatial fit ID from 4 to 8
[Mon Mar  5 15:41:22 2012] 282.352029 total counts/ 282.352000 bgd. counts: snr = 0.000002
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 8.899937 pixels
  Position = (359.3, 181.8) = 0 21 14.63 -8 48 47.4
  Extent = 22.1 (2.8-41.5)", rotation angle = 0
  Source counts = 0.0 +/- 16.8
  Background counts = 282.4
  Rate = 6e-10 +/- 0.0004
  Deleting source due to low Poisson probability