[Mon Mar  5 11:38:35 2012] Detection parameters:
  Position = (306.0, 267.4) = 0 21 30.27 -8 42 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.7 +/- 11.0
  Background counts = 20.4
  Rate = 0.001 +/- 0.0003

[Mon Mar  5 11:38:36 2012] Off-axis axis estimate = 2.31'
[Mon Mar  5 13:48:44 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 13:48:44 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Mon Mar  5 13:48:44 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.993
[Mon Mar  5 13:48:44 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.59"
[Mon Mar  5 14:44:19 2012] fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src29.ximg exists
[Mon Mar  5 14:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src29.csv
[Mon Mar  5 14:44:19 2012] fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Mar  5 14:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src29.csv
[Mon Mar  5 14:44:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 14:44:20 2012] fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Mar  5 14:44:20 2012] fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Mar  5 14:44:20 2012] Fit fullrun_mos1_xmm0200630201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Mar  5 15:41:22 2012] Spatial fit model total counts = 245.174000, observed total counts = 245.000000
[Mon Mar  5 15:41:22 2012] Offset between fit and detection position for source 26 = 0.031386 pixels
[Mon Mar  5 15:41:22 2012] 242.446600 total counts/ 219.918000 bgd. counts: snr = 1.519161
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.031386 pixels
  Position = (306.0, 267.4) = 0 21 30.26 -8 42 35.2
  Extent = 3.3 (2.1-6.8)", rotation angle = 0
  Source counts = 22.5 +/- 15.6
  Background counts = 219.9
  Rate = 0.0005 +/- 0.0003
  Deleting source due to low Poisson probability