[Thu Aug  9 07:31:40 2012] Detection parameters:
  Position = (293.6, 291.3) = 9 0 29.16 39 1 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 676.9 +/- 33.2
  Background counts = 51.8
  Rate = 0.02 +/- 0.001

[Thu Aug  9 07:31:40 2012] Off-axis axis estimate = 0.62'
[Thu Aug  9 08:26:43 2012] Using EEF radius (= 6.74 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 08:26:43 2012] Initial guess for spatial extent in simple fitting = 6.74"
[Thu Aug  9 08:26:43 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.952
[Thu Aug  9 08:26:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.74"
[Thu Aug  9 08:39:28 2012] fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  9 08:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 08:39:29 2012] fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  9 08:39:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 08:39:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 08:39:29 2012] fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  9 08:39:29 2012] fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  9 08:39:29 2012] Fit fullrun_mos2_xmm0200630101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  9 08:39:40 2012] Spatial fit model total counts = 584.997000, observed total counts = 585.000000
[Thu Aug  9 08:39:40 2012] Offset between fit and detection position for source 2 = 0.182349 pixels
[Thu Aug  9 08:39:40 2012] 584.379000 total counts/ 228.980000 bgd. counts: snr = 23.486453
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.182349 pixels
  Position = (293.6, 291.5) = 9 0 29.15 39 1 44.7
  Extent = 5.8 (5.1-6.4)", rotation angle = 0
  Source counts = 355.4 +/- 24.2
  Background counts = 229.0
  Rate = 0.02 +/- 0.001
[Thu Aug  9 08:39:40 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 08:39:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 08:39:40 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 08:39:40 2012] Source does appear to be extended
[Thu Aug  9 08:39:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 09:34:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 09:34:28 2012] Initial guess for spatial extent in simple fitting = 5.79"
[Thu Aug  9 09:34:28 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.671
[Thu Aug  9 09:34:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.79"
[Thu Aug  9 09:50:11 2012] fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  9 09:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_src1.csv
[Thu Aug  9 09:50:11 2012] fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  9 09:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_src1.csv
[Thu Aug  9 09:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 09:50:11 2012] fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  9 09:50:11 2012] fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  9 09:50:11 2012] Fit fullrun_mos2_xmm0200630101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  9 09:50:20 2012] Spatial fit model total counts = 585.000000, observed total counts = 585.000000
[Thu Aug  9 09:50:20 2012] Offset between fit and detection position for source 2 = 0.001695 pixels
[Thu Aug  9 09:50:20 2012] 584.439000 total counts/ 230.676000 bgd. counts: snr = 23.292237
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001695 pixels
  Position = (293.6, 291.5) = 9 0 29.15 39 1 44.7
  Extent = 5.7 (5.1-6.4)", rotation angle = 0
  Source counts = 353.8 +/- 24.2
  Background counts = 230.7
  Rate = 0.02 +/- 0.001
[Thu Aug  9 09:50:20 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 09:50:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 09:50:20 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 09:50:20 2012] Source does appear to be extended
[Thu Aug  9 09:50:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 11:03:42 2012] XMMSAS src. selection expression = ellipse(25494.955600, 25311.731600, 344.368810, 344.368810, 0.000000, X, Y)
[Thu Aug  9 11:03:42 2012] Writing source region out to fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug  9 11:03:42 2012] Extracting stamp from image fullrun_mos2_xmm0200630101_pi300-10000_cl_sm2.00.img.gz, (274, 272) - (313, 311)
[Thu Aug  9 11:03:42 2012] XMMSAS bgd. selection expression = annulus(25494.955600, 25311.731600, 573.948017, 1147.896033, X, Y)
[Thu Aug  9 11:03:42 2012] Writing fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2.gif
[Thu Aug  9 11:03:46 2012] Mean detx,y = (1802.03, -2034.28) 
[Thu Aug  9 11:03:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 11:04:02 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 11:04:02 2012] Setting source spectrum file to fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  9 11:04:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug  9 11:26:30 2012] Updating aperture counts using extracted products
[Thu Aug  9 11:26:30 2012] Error reading totcts from fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  9 11:26:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 11:26:30 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2.arf
[Thu Aug  9 11:26:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 11:26:30 2012] Updating source flux to 2.1e-13
[Thu Aug  9 11:27:38 2012] Reading fit data from xmm0200630101/analysis//spectral/fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2_pl.csv
[Thu Aug  9 11:27:38 2012] Spectral fit parameter nH value = 1.14517e+14
[Thu Aug  9 11:27:38 2012] Spectral fit parameter PhoIndex value = 2.06491
[Thu Aug  9 11:27:38 2012] Failed to get F(0.3-8.0) from xmm0200630101/analysis//spectral/fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Aug  9 11:27:38 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 11:27:38 2012] Using Nh = 1.1e+14, photon index=2.06, rate=0.0163, arf fullrun_mos2_xmm0200630101_pi300-10000_pass1_cl_src2.arf
[Thu Aug  9 11:27:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 11:27:38 2012] Updating source flux to 1.9e-13