[Fri Jul 20 10:12:58 2012] Detection parameters:
  Position = (261.9, 355.8) = 10 56 39.27 7 2 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.8 +/- 15.1
  Background counts = 4.9
  Rate = 0.01 +/- 0.002

[Fri Jul 20 10:12:59 2012] Off-axis axis estimate = 4.93'
[Fri Jul 20 10:54:43 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 10:54:43 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Fri Jul 20 10:54:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.695
[Fri Jul 20 10:54:43 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.89"
[Fri Jul 20 11:23:03 2012] fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jul 20 11:23:03 2012] fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jul 20 11:23:03 2012] Fit fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_src5 appears to have run properly
[Fri Jul 20 11:23:03 2012] fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jul 20 11:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jul 20 11:23:03 2012] fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jul 20 11:23:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jul 20 11:23:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200530801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 12:10:43 2012] Spatial fit model total counts = 150.112000, observed total counts = 140.000000
[Fri Jul 20 12:10:43 2012] Offset between fit and detection position for source 3 = 0.272732 pixels
[Fri Jul 20 12:10:43 2012] 151.107300 total counts/ 102.099000 bgd. counts: snr = 4.850192
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.272732 pixels
  Position = (262.0, 355.5) = 10 56 39.23 7 3 3.9
  Extent = 4.2" x 4.2", rotation angle = 0
  Source counts = 49.0 +/- 12.3
  Background counts = 102.1
  Rate = 0.003 +/- 0.0008
[Fri Jul 20 12:10:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 12:10:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 12:10:43 2012] Assessing source extent using major
[Fri Jul 20 12:10:43 2012] Source does appear to be extended
[Fri Jul 20 12:10:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 12:53:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 12:53:36 2012] Initial guess for spatial extent in simple fitting = 4.18"
[Fri Jul 20 12:53:36 2012] source mask rpix=1.0, npix_max = 8, mask sum = 4, frac = 0.468
[Fri Jul 20 12:53:36 2012] Skipping simple spatial due to low active detector fraction
[Fri Jul 20 13:45:04 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 13:45:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 13:45:04 2012] Assessing source extent using major
[Fri Jul 20 13:45:04 2012] Source does appear to be extended
[Fri Jul 20 13:45:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:17:21 2012] XMMSAS src. selection expression = ellipse(22746.697144, 30882.735400, 250.914007, 250.914007, 0.000000, X, Y)
[Fri Jul 20 14:17:21 2012] Writing source region out to fullrun_mos1_xmm0200530801_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 20 14:17:21 2012] Extracting stamp from image fullrun_mos1_xmm0200530801_pi300-10000_cl_sm2.00.img.gz, (248, 341) - (276, 370)
[Fri Jul 20 14:17:21 2012] XMMSAS bgd. selection expression = annulus(22746.697144, 30882.735400, 418.190012, 836.380024, X, Y)
[Fri Jul 20 14:17:21 2012] Writing fullrun_mos1_xmm0200530801_pi300-10000_pass1_cl_src3.gif
[Fri Jul 20 14:18:33 2012] Mean detx,y = (4338.22, -2443.59) 
[Fri Jul 20 14:18:34 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 14:18:40 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 14:18:40 2012] Setting source spectrum file to fullrun_mos1_xmm0200530801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 20 14:18:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200530801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 20 14:26:25 2012] Not generating rmf since there are only 49 counts
[Fri Jul 20 14:26:25 2012] rmf not generated due to insufficient counts
[Fri Jul 20 14:44:30 2012] Updating aperture counts using extracted products
[Fri Jul 20 14:44:30 2012] Error reading totcts from fullrun_mos1_xmm0200530801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 20 14:44:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 14:44:30 2012] Using photon index=1.80, rate=0.0033, arf fullrun_mos1_xmm0200530801_pi300-10000_pass1_cl_src3.arf
[Fri Jul 20 14:44:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 14:44:30 2012] Updating source flux to 6.4e-14
[Fri Jul 20 14:44:32 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting