[Wed Jun 13 09:03:15 2012] Detection parameters:
  Position = (231.3, 280.4) = 10 56 48.34 6 57 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.9 +/- 11.3
  Background counts = 26.1
  Rate = 0.004 +/- 0.0008

[Wed Jun 13 09:03:15 2012] Off-axis axis estimate = 5.04'
[Wed Jun 13 09:05:28 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 09:05:28 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Wed Jun 13 09:05:28 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Wed Jun 13 09:05:28 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.95"
[Wed Jun 13 09:44:02 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jun 13 09:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src30.csv
[Wed Jun 13 09:44:02 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jun 13 09:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src30.csv
[Wed Jun 13 09:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 09:44:02 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jun 13 09:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Jun 13 09:44:02 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jun 13 09:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Jun 13 09:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:04:07 2012] Spatial fit model total counts = 303.245000, observed total counts = 262.000000
[Wed Jun 13 11:04:07 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 11:04:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:04:07 2012] Assessing source extent using major
[Wed Jun 13 11:04:07 2012] Source does appear to be extended
[Wed Jun 13 11:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:04:07 2012] Deleting source due to low Poisson probability 0.9