[Wed Jun 13 09:03:14 2012] Detection parameters:
  Position = (303.3, 321.8) = 10 56 27.31 7 0 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52470.4 +/- 268.5
  Background counts = 28.7
  Rate = 3 +/- 0.01

[Wed Jun 13 09:03:15 2012] Off-axis axis estimate = 1.73'
[Wed Jun 13 09:05:28 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 09:05:28 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jun 13 09:05:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Jun 13 09:05:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Jun 13 09:44:01 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 09:44:01 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 09:44:01 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 09:44:01 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 09:44:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 09:44:02 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 09:44:02 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 09:44:02 2012] Fit fullrun_pn_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 11:04:06 2012] Spatial fit model total counts = 49840.900000, observed total counts = 49293.000000
[Wed Jun 13 11:04:06 2012] Offset between fit and detection position for source 1 = 0.221080 pixels
[Wed Jun 13 11:04:06 2012] 49854.500000 total counts/ 10719.700000 bgd. counts: snr = 377.982596
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.221080 pixels
  Position = (303.2, 321.6) = 10 56 27.34 7 0 36.0
  Extent = 6.6 (6.5-6.6)", rotation angle = 0
  Source counts = 39134.8 +/- 223.3
  Background counts = 10719.7
  Rate = 2 +/- 0.01
[Wed Jun 13 11:04:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:04:07 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 11:04:07 2012] Source does appear to be extended
[Wed Jun 13 11:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:04:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:04:25 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Wed Jun 13 11:04:25 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Wed Jun 13 11:04:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.59"
[Wed Jun 13 11:45:56 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 11:45:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 11:45:56 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 11:45:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 11:45:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:45:56 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 11:45:56 2012] fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 11:45:56 2012] Fit fullrun_pn_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 12:46:14 2012] Spatial fit model total counts = 49802.300000, observed total counts = 49448.000000
[Wed Jun 13 12:46:14 2012] Offset between fit and detection position for source 1 = 0.015727 pixels
[Wed Jun 13 12:46:14 2012] 49984.000000 total counts/ 10783.800000 bgd. counts: snr = 377.487322
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015727 pixels
  Position = (303.2, 321.6) = 10 56 27.34 7 0 36.0
  Extent = 6.6 (6.6-6.7)", rotation angle = 0
  Source counts = 39200.2 +/- 223.6
  Background counts = 10783.8
  Rate = 2 +/- 0.01
[Wed Jun 13 12:46:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:46:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:46:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 12:46:14 2012] Source does appear to be extended
[Wed Jun 13 12:46:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:46:28 2012] Counts = 39200.200000, rescaling region sizes by 3.000000
[Wed Jun 13 12:46:28 2012] XMMSAS src. selection expression = ellipse(26329.162840, 27926.797200, 1189.882834, 1189.882834, 0.000000, X, Y)
[Wed Jun 13 12:46:28 2012] Writing source region out to fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 12:46:28 2012] Extracting stamp from image fullrun_pn_xmm0200530501_pi300-10000_cl_sm2.00.img.gz, (235, 253) - (372, 390)
[Wed Jun 13 12:46:28 2012] XMMSAS bgd. selection expression = annulus(26329.162840, 27926.797200, 5949.414171, 11898.828342, X, Y) && !ellipse(22797.164215, 30851.023010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33360.673523, 30249.897827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20168.804800, 29101.841000, 464.527213, 464.527213, 0.000000, X, Y) && !ellipse(24944.612976, 21779.496796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30830.587250, 32122.681152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36947.657928, 32698.333984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23892.061127, 36407.561249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35879.040497, 33446.356628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18578.621353, 32655.824310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18838.373489, 32166.066986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19236.739000, 20400.632200, 641.544018, 641.544018, 0.000000, X, Y) && !ellipse(35166.087800, 36979.247400, 583.543217, 302.821609, 226.834000, X, Y) && !ellipse(34625.922424, 36337.473785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30051.864274, 34526.164400, 399.219211, 399.219211, 0.000000, X, Y) && !ellipse(23427.473160, 23256.328000, 323.589609, 323.589609, 0.000000, X, Y) && !ellipse(22215.379880, 22765.225400, 588.035217, 378.761611, 22.240461, X, Y) && !ellipse(24222.678454, 21442.823400, 452.858413, 452.858413, 0.000000, X, Y) && !ellipse(33820.134922, 37310.756418, 559.589339, 499.247311, 79.783655, X, Y) && !ellipse(35030.641815, 33068.184875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26692.501068, 29707.069122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25689.515961, 29038.901794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.187805, 27007.536224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28841.517700, 23148.665200, 1105.096032, 378.017611, 279.392000, X, Y) && !ellipse(18624.548050, 18268.294891, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 12:46:28 2012] Writing fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 12:46:54 2012] Mean detx,y = (104.65, -207.01) 
[Wed Jun 13 12:47:01 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:49:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:49:58 2012] Setting source spectrum file to fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 12:49:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 14:44:35 2012] Updating aperture counts using extracted products
[Wed Jun 13 14:44:35 2012] Error reading totcts from fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 14:44:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 14:44:35 2012] Using photon index=1.80, rate=1.78, arf fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 14:44:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 14:44:35 2012] Updating source flux to 4.2e-12
[Wed Jun 13 14:46:18 2012] Reading fit data from xmm0200530501/analysis//spectral/fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 13 14:46:18 2012] Spectral fit parameter nH value = 3.08158e+21
[Wed Jun 13 14:46:18 2012] Spectral fit parameter PhoIndex value = 4.14669
[Wed Jun 13 14:46:18 2012] Failed to get F(0.3-8.0) from xmm0200530501/analysis//spectral/fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 14:46:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 14:46:18 2012] Using Nh = 3.1e+21, photon index=4.15, rate=1.78, arf fullrun_pn_xmm0200530501_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 14:46:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 14:46:18 2012] Updating source flux to 2.7e-12