[Wed Jun 13 09:03:37 2012] Detection parameters:
  Position = (384.1, 348.2) = 10 56 3.70 7 2 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.0 +/- 15.1
  Background counts = 9.8
  Rate = 0.009 +/- 0.0009

[Wed Jun 13 09:03:37 2012] Off-axis axis estimate = 7.18'
[Wed Jun 13 09:44:02 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 09:44:02 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Wed Jun 13 09:44:02 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.018
[Wed Jun 13 09:44:02 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.02"
[Wed Jun 13 10:15:51 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 13 10:15:51 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 13 10:15:51 2012] Fit fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src5 appears to have run properly
[Wed Jun 13 10:15:52 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 13 10:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 13 10:15:52 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 13 10:15:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Jun 13 10:15:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:04:11 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.084271 pixels away
[Wed Jun 13 11:04:11 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:04:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:04:11 2012] Assessing source extent using major
[Wed Jun 13 11:04:11 2012] Source does appear to be extended
[Wed Jun 13 11:04:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:45:57 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:45:57 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Wed Jun 13 11:45:57 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.018
[Wed Jun 13 11:45:57 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.02"
[Wed Jun 13 11:59:43 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 13 11:59:43 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 13 11:59:43 2012] Fit fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Jun 13 11:59:43 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 13 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 13 11:59:43 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 13 11:59:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jun 13 11:59:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200530501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 12:46:16 2012] Spatial fit model total counts = 238.742000, observed total counts = 217.000000
[Wed Jun 13 12:46:16 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 13 12:46:16 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 12:46:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 12:46:16 2012] Assessing source extent using major
[Wed Jun 13 12:46:16 2012] Source does appear to be extended
[Wed Jun 13 12:46:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 13:58:58 2012] XMMSAS src. selection expression = ellipse(33368.612061, 30249.138489, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 13:58:58 2012] Writing source region out to fullrun_mos1_xmm0200530501_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 13 13:58:58 2012] Extracting stamp from image fullrun_mos1_xmm0200530501_pi300-10000_cl_sm2.00.img.gz, (347, 311) - (422, 386)
[Wed Jun 13 13:58:58 2012] XMMSAS bgd. selection expression = annulus(33368.612061, 30249.138489, 1087.500000, 2175.000000, X, Y)
[Wed Jun 13 13:58:58 2012] Writing fullrun_mos1_xmm0200530501_pi300-10000_pass1_cl_src2.gif
[Wed Jun 13 14:01:26 2012] Mean detx,y = (-278.97, 7148.53) 
[Wed Jun 13 14:01:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 14:01:56 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 14:01:56 2012] Setting source spectrum file to fullrun_mos1_xmm0200530501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 14:01:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200530501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 13 14:14:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 14:14:22 2012] rmf not generated due to insufficient counts
[Wed Jun 13 14:44:36 2012] Updating aperture counts using extracted products
[Wed Jun 13 14:44:36 2012] Error reading totcts from fullrun_mos1_xmm0200530501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 14:44:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 14:44:36 2012] Using photon index=1.80, rate=0.00882, arf fullrun_mos1_xmm0200530501_pi300-10000_pass1_cl_src2.arf
[Wed Jun 13 14:44:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 14:44:36 2012] Updating source flux to 1.2e-13
[Wed Jun 13 14:44:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting