[Wed Jun 13 09:03:37 2012] Detection parameters:
  Position = (404.6, 425.5) = 10 55 57.69 7 8 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.8 +/- 11.0
  Background counts = 7.2
  Rate = 0.002 +/- 0.0005

[Wed Jun 13 09:03:37 2012] Off-axis axis estimate = 12.01'
[Wed Jun 13 09:44:02 2012] Using EEF radius (= 12.43 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 09:44:02 2012] Initial guess for spatial extent in simple fitting = 12.43"
[Wed Jun 13 09:44:02 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.798
[Wed Jun 13 09:44:02 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.43"
[Wed Jun 13 10:15:51 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src16.ximg exists
[Wed Jun 13 10:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src16.csv
[Wed Jun 13 10:15:51 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Jun 13 10:15:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src16.csv
[Wed Jun 13 10:15:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 10:15:52 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Jun 13 10:15:52 2012] fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Jun 13 10:15:52 2012] Fit fullrun_mos1_xmm0200530501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Jun 13 11:04:11 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.091911 pixels away
[Wed Jun 13 11:04:11 2012] Spatial fit model total counts = 169.105000, observed total counts = 157.000000
[Wed Jun 13 11:04:11 2012] Offset between fit and detection position for source 10 = 0.089968 pixels
[Wed Jun 13 11:04:11 2012] Warning, changing simple spatial fit ID from 16 to 17
[Wed Jun 13 11:04:11 2012] 166.966300 total counts/ 129.002000 bgd. counts: snr = 3.342544
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.089968 pixels
  Position = (404.6, 425.5) = 10 55 57.72 7 8 8.1
  Extent = 5.0 (3.2-7.7)", rotation angle = 0
  Source counts = 38.0 +/- 12.9
  Background counts = 129.0
  Rate = 0.002 +/- 0.0005
[Wed Jun 13 11:04:11 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:04:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:04:11 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 11:04:11 2012] Source does appear to be extended
[Wed Jun 13 11:04:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:04:11 2012] Deleting source due to low Poisson probability 0.9