[Sun Jul  7 18:05:42 2013] Detection parameters:
  Position = (311.8, 286.0) = 20 33 18.00 41 16 59.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.2 +/- 12.7
  Background counts = 20.7
  Rate = 0.003 +/- 0.0006

[Sun Jul  7 18:05:42 2013] Off-axis axis estimate = 1.32'
[Sun Jul  7 23:48:35 2013] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Sun Jul  7 23:48:35 2013] Initial guess for spatial extent in simple fitting = 7.09"
[Sun Jul  7 23:48:35 2013] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.771
[Sun Jul  7 23:48:35 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 7.09"
[Mon Jul  8 02:15:59 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jul  8 02:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src27.csv
[Mon Jul  8 02:15:59 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jul  8 02:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src27.csv
[Mon Jul  8 02:15:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 02:16:00 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jul  8 02:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Jul  8 02:16:00 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jul  8 02:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Mon Jul  8 02:16:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 02:16:31 2013] Spatial fit model total counts = 504.269000, observed total counts = 441.000000
[Mon Jul  8 02:16:31 2013] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul  8 02:16:31 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 02:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 02:16:31 2013] Assessing source extent using major
[Mon Jul  8 02:16:31 2013] Source does appear to be extended
[Mon Jul  8 02:16:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  8 08:31:42 2013] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Mon Jul  8 08:31:42 2013] Initial guess for spatial extent in simple fitting = 7.09"
[Mon Jul  8 08:31:42 2013] source mask rpix=1.6, npix_max = 18, mask sum = 14, frac = 0.771
[Mon Jul  8 08:31:42 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 7.09"
[Mon Jul  8 10:39:22 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src26.ximg exists
[Mon Jul  8 10:39:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src26.csv
[Mon Jul  8 10:39:22 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Jul  8 10:39:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src26.csv
[Mon Jul  8 10:39:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 10:39:23 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Jul  8 10:39:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Jul  8 10:39:23 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Jul  8 10:39:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Jul  8 10:39:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 10:39:53 2013] Spatial fit model total counts = 508.095000, observed total counts = 441.000000
[Mon Jul  8 10:39:53 2013] Poor agreement between spatial fit and data for source 53
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul  8 10:39:53 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 10:39:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 10:39:53 2013] Assessing source extent using major
[Mon Jul  8 10:39:53 2013] Source does appear to be extended
[Mon Jul  8 10:39:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  8 14:26:50 2013] XMMSAS src. selection expression = ellipse(27081.000885, 24834.843445, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  8 14:26:50 2013] Writing source region out to fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src53_src.reg
[Mon Jul  8 14:26:50 2013] Extracting stamp from image fullrun_mos2_xmm0200450401_pi300-10000_cl_sm2.00.img.gz, (274, 249) - (349, 324)
[Mon Jul  8 14:26:50 2013] XMMSAS bgd. selection expression = annulus(27081.000885, 24834.843445, 1087.500000, 2175.000000, X, Y) && !ellipse(27748.058411, 26934.719391, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28714.451200, 22512.090000, 439.892013, 402.021612, 19.856659, X, Y) && !ellipse(28416.846860, 24541.887000, 278.211208, 278.211208, 0.000000, X, Y) && !ellipse(26104.148200, 25643.895600, 353.855210, 353.855210, 0.000000, X, Y) && !ellipse(29483.698853, 27181.177795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28426.983917, 26379.191681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28195.967163, 25874.813110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.148682, 23207.716705, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  8 14:26:50 2013] Writing fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src53.gif
[Mon Jul  8 14:37:44 2013] Mean detx,y = (-286.94, -2034.69) 
[Mon Jul  8 14:37:44 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  8 14:37:50 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  8 14:37:50 2013] Setting source spectrum file to fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Jul  8 14:37:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon Jul  8 15:12:12 2013] Not generating rmf since there are only 69 counts
[Mon Jul  8 15:12:12 2013] rmf not generated due to insufficient counts
[Mon Jul  8 15:25:40 2013] Updating aperture counts using extracted products
[Mon Jul  8 15:25:40 2013] Total counts from fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 314.00
[Mon Jul  8 15:25:40 2013] Total counts from fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src53_bgd.pi.gz = 743.00
[Mon Jul  8 15:25:40 2013] Got source and background scale factors 1151220.000000, 5023784.000000
[Mon Jul  8 15:25:40 2013] User source parameters:
  Position = (311.8, 286.0) = 20 33 18.00 41 16 59.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 143.7 +/- 18.7
  Background aperture counts = 170.3
  Rate = 0.006 +/- 0.0008

[Mon Jul  8 15:25:40 2013] Updating counts from extracted products
[Mon Jul  8 15:25:40 2013] Set source signif. to 143.74/13.05 = 11.02
[Mon Jul  8 15:25:44 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  8 15:25:44 2013] Using photon index=1.80, rate=0.00621, arf fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src53.arf
[Mon Jul  8 15:25:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  8 15:25:44 2013] Updating source flux to 1.2e-13
[Mon Jul  8 15:25:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul  8 15:26:00 2013] xmm0200450401/analysis//spectral/fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete