[Sun Jul  7 18:05:41 2013] Detection parameters:
  Position = (147.0, 288.0) = 20 34 21.61 41 17 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.2 +/- 10.4
  Background counts = 7.7
  Rate = 0.003 +/- 0.0004

[Sun Jul  7 18:05:42 2013] Off-axis axis estimate = 11.01'
[Sun Jul  7 23:48:35 2013] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Sun Jul  7 23:48:35 2013] Initial guess for spatial extent in simple fitting = 11.93"
[Sun Jul  7 23:48:35 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.856
[Sun Jul  7 23:48:35 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 11.93"
[Mon Jul  8 02:15:59 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src42.ximg exists
[Mon Jul  8 02:15:59 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src42_1.ximg exists
[Mon Jul  8 02:15:59 2013] Fit fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_src42 appears to have run properly
[Mon Jul  8 02:16:00 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Mon Jul  8 02:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jul  8 02:16:00 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Mon Jul  8 02:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src42.csv
[Mon Jul  8 02:16:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200450401_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 02:16:31 2013] Spatial fit model total counts = 136.406000, observed total counts = 133.000000
[Mon Jul  8 02:16:31 2013] Offset between fit and detection position for source 17 = 0.251212 pixels
[Mon Jul  8 02:16:31 2013] 137.452100 total counts/ 56.365900 bgd. counts: snr = 10.800372
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.251212 pixels
  Position = (147.0, 288.2) = 20 34 21.62 41 17 12.3
  Extent = 18.5 (12.2-23.9)" x 6.6 (4.3-9.4)", rotation angle = 99 (86-112) degrees
  Source counts = 81.1 +/- 11.7
  Background counts = 56.4
  Rate = 0.004 +/- 0.0005
[Mon Jul  8 02:16:31 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 02:16:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 02:16:31 2013] Assessing source extent using major axis lower bound
[Mon Jul  8 02:16:31 2013] Source does appear to be extended
[Mon Jul  8 02:16:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Mon Jul  8 08:31:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  8 08:31:42 2013] Initial guess for spatial extent in simple fitting = 12.53"
[Mon Jul  8 08:31:42 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.919
[Mon Jul  8 08:31:42 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 12.53"
[Mon Jul  8 10:39:22 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src39.ximg exists
[Mon Jul  8 10:39:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src39.csv
[Mon Jul  8 10:39:22 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon Jul  8 10:39:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src39.csv
[Mon Jul  8 10:39:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 10:39:23 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon Jul  8 10:39:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon Jul  8 10:39:23 2013] fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon Jul  8 10:39:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src39.csv
[Mon Jul  8 10:39:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200450401_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  8 10:39:53 2013] Warning, spatial fit 39 centroid is now closest to src. 43
[Mon Jul  8 10:39:53 2013] Vigneting correction estimate = 1.000000
[Mon Jul  8 10:39:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  8 10:39:53 2013] Assessing source extent using major axis lower bound
[Mon Jul  8 10:39:53 2013] Source does appear to be extended
[Mon Jul  8 10:39:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Mon Jul  8 14:26:50 2013] XMMSAS src. selection expression = ellipse(12739.455000, 25027.993600, 1107.414032, 396.069011, 98.825942, X, Y)
[Mon Jul  8 14:26:50 2013] Writing source region out to fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src17_src.reg
[Mon Jul  8 14:26:50 2013] Extracting stamp from image fullrun_mos2_xmm0200450401_pi300-10000_cl_sm2.00.img.gz, (83, 225) - (211, 352)
[Mon Jul  8 14:26:50 2013] XMMSAS bgd. selection expression = annulus(12739.455000, 25027.993600, 1845.690053, 3691.380106, X, Y) && !ellipse(16258.584200, 27757.409000, 446.049206, 446.049206, 0.000000, X, Y)
[Mon Jul  8 14:26:50 2013] Writing fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src17.gif
[Mon Jul  8 14:40:41 2013] Mean detx,y = (12571.52, -8291.65) 
[Mon Jul  8 14:40:42 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  8 14:41:02 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  8 14:41:02 2013] Setting source spectrum file to fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Jul  8 14:41:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jul  8 15:19:35 2013] Not generating rmf since there are only 81 counts
[Mon Jul  8 15:19:35 2013] rmf not generated due to insufficient counts
[Mon Jul  8 15:25:41 2013] Updating aperture counts using extracted products
[Mon Jul  8 15:25:41 2013] Total counts from fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 116.00
[Mon Jul  8 15:25:41 2013] Total counts from fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src17_bgd.pi.gz = 827.00
[Mon Jul  8 15:25:41 2013] Got source and background scale factors 1146972.000000, 21060346.000000
[Mon Jul  8 15:25:41 2013] User source parameters:
  Position = (147.0, 288.2) = 20 34 21.62 41 17 12.3
  Extent = 18.5 (12.2-23.9)" x 6.6 (4.3-9.4)", rotation angle = 99 (86-112) degrees
  Source aperture counts = 71.0 +/- 11.8
  Background aperture counts = 45.0
  Rate = 0.003 +/- 0.0005

[Mon Jul  8 15:25:44 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  8 15:25:44 2013] Using photon index=1.80, rate=0.0035, arf fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src17.arf
[Mon Jul  8 15:25:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  8 15:25:44 2013] Updating source flux to 1.8e-13
[Mon Jul  8 15:25:54 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul  8 15:26:00 2013] xmm0200450401/analysis//spectral/fullrun_mos2_xmm0200450401_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete