[Wed Mar 28 16:39:06 2012] Detection parameters:
  Position = (309.2, 291.1) = 20 33 17.10 41 17 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.4 +/- 23.8
  Background counts = 44.6
  Rate = 0.02 +/- 0.002

[Wed Mar 28 16:39:12 2012] Off-axis axis estimate = 0.94'
[Wed Mar 28 16:42:58 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 16:42:58 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Wed Mar 28 16:42:58 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Wed Mar 28 16:42:58 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 6.90"
[Wed Mar 28 22:43:55 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src78.ximg exists
[Wed Mar 28 22:43:55 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src78_1.ximg exists
[Wed Mar 28 22:43:55 2012] Fit fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src78 appears to have run properly
[Wed Mar 28 22:43:57 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Wed Mar 28 22:43:57 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Wed Mar 28 22:43:57 2012] Fit fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Thu Mar 29 05:51:03 2012] Source 80 is offset by 4.590605 and 1.163454 pixels which is larger than
2 X fitted extent = 2.431081 x 2.431081, not incorporating fit results
[Thu Mar 29 05:51:03 2012] Spatial fit model total counts = 1472.180000, observed total counts = 1474.000000
[Thu Mar 29 05:51:03 2012] Offset between fit and detection position for source 80 = 1.550861 pixels
[Thu Mar 29 05:51:03 2012] 1508.844000 total counts/ 1322.670000 bgd. counts: snr = 5.119096
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 1.550861 pixels
  Position = (307.7, 290.9) = 20 33 17.69 41 17 2.6
  Extent = 13.8 (11.1-27.6)" x 6.0 (4.0-8.0)", rotation angle = 158 (146-175) degrees
  Source counts = 186.2 +/- 38.8
  Background counts = 1322.7
  Rate = 0.01 +/- 0.002
[Thu Mar 29 05:51:03 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 05:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 05:51:03 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 05:51:03 2012] Source does appear to be extended
[Thu Mar 29 05:51:03 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Thu Mar 29 05:51:03 2012] Source is confused with source 70
[Thu Mar 29 05:52:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 05:52:18 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Thu Mar 29 05:52:18 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.974
[Thu Mar 29 05:52:18 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 9.90"
[Thu Mar 29 12:37:22 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src60.ximg exists
[Thu Mar 29 12:37:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src60.csv
[Thu Mar 29 12:37:22 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src60_1.ximg exists
[Thu Mar 29 12:37:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src60.csv
[Thu Mar 29 12:37:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 12:37:25 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Thu Mar 29 12:37:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Thu Mar 29 12:37:25 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Thu Mar 29 12:37:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Thu Mar 29 12:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:31:57 2012] Warning, spatial fit 60 centroid is now closest to src. 72
[Thu Mar 29 20:31:57 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 20:31:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 20:31:57 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 20:31:57 2012] Source does appear to be extended
[Thu Mar 29 20:31:57 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Thu Mar 29 20:33:06 2012] XMMSAS src. selection expression = ellipse(26717.518400, 25261.051000, 828.054024, 359.481610, 158.142000, X, Y)
[Thu Mar 29 20:33:06 2012] Writing source region out to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src80_src.reg
[Thu Mar 29 20:33:06 2012] Extracting stamp from image fullrun_pn_xmm0200450201_pi300-10000_cl_sm2.00.img.gz, (260, 243) - (355, 339)
[Thu Mar 29 20:33:06 2012] XMMSAS bgd. selection expression = annulus(26717.518400, 25261.051000, 1380.090040, 2760.180079, X, Y) && !ellipse(27356.203602, 27401.123600, 1430.587241, 1430.587241, 0.000000, X, Y) && !ellipse(28332.595152, 22957.318613, 471.018579, 441.711098, 11.616282, X, Y) && !ellipse(26464.337800, 22225.564400, 471.769614, 471.769614, 0.000000, X, Y) && !ellipse(28290.202118, 28571.898071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25497.897186, 27803.434357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.624695, 26824.748077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.428650, 25967.778961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28870.434875, 25978.401733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.092468, 25704.830170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26153.137177, 25621.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28069.670074, 24909.516144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.262200, 24520.685000, 391.757611, 391.757611, 0.000000, X, Y) && !ellipse(26931.613007, 24233.755432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25256.804200, 23464.090200, 369.042411, 252.858407, 16.050000, X, Y) && !ellipse(26233.884000, 22629.940000, 2319.120067, 2319.120067, 0.000000, X, Y) && !ellipse(28444.892090, 21965.113876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26481.971200, 21372.744000, 1139.896033, 1139.896033, 0.000000, X, Y)
[Thu Mar 29 20:33:06 2012] Writing fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src80.gif
[Thu Mar 29 21:44:38 2012] Mean detx,y = (-145.30, 2008.82) 
[Thu Mar 29 21:44:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 21:45:20 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 21:45:20 2012] Setting source spectrum file to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Thu Mar 29 21:45:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Fri Mar 30 04:26:07 2012] Updating aperture counts using extracted products
[Fri Mar 30 04:26:07 2012] Error reading totcts from fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Fri Mar 30 04:26:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 04:26:13 2012] Using photon index=1.80, rate=0.0104, arf fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src80.arf
[Fri Mar 30 04:26:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 04:26:13 2012] Updating source flux to 3.6e-14
[Fri Mar 30 04:34:22 2012] Flag b found in src. 80 procflags, skipping spectral fitting
[Fri Mar 30 04:34:22 2012] Flag c found in src. 80 procflags, skipping spectral fitting