[Wed Mar 28 16:38:59 2012] Detection parameters:
  Position = (428.0, 250.9) = 20 32 31.29 41 14 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1412.1 +/- 45.5
  Background counts = 40.1
  Rate = 0.2 +/- 0.005

[Wed Mar 28 16:39:12 2012] Off-axis axis estimate = 10.01'
[Wed Mar 28 16:42:57 2012] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 16:42:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 16:42:57 2012] Initial guess for spatial extent in simple fitting = 11.43"
[Wed Mar 28 16:42:57 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.920
[Wed Mar 28 16:42:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.43"
[Wed Mar 28 22:43:53 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Mar 28 22:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src3.csv
[Wed Mar 28 22:43:53 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Mar 28 22:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src3.csv
[Wed Mar 28 22:43:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 22:43:55 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Mar 28 22:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Mar 28 22:43:55 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Mar 28 22:43:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Mar 28 22:43:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 05:51:03 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.950870 pixels away
[Thu Mar 29 05:51:03 2012] Source 3 is offset by 6.862817 and -0.251655 pixels which is larger than
2 X fitted extent = 1.266805 x 1.266805, not incorporating fit results
[Thu Mar 29 05:51:03 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 05:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 05:51:03 2012] Assessing source extent using major
[Thu Mar 29 05:51:03 2012] Source does appear to be extended
[Thu Mar 29 05:51:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 05:52:18 2012] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 05:52:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 05:52:18 2012] Initial guess for spatial extent in simple fitting = 11.43"
[Thu Mar 29 05:52:18 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.920
[Thu Mar 29 05:52:18 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.43"
[Thu Mar 29 12:37:21 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 29 12:37:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src3.csv
[Thu Mar 29 12:37:21 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 29 12:37:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src3.csv
[Thu Mar 29 12:37:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 12:37:23 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 29 12:37:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Mar 29 12:37:23 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 29 12:37:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Mar 29 12:37:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:31:56 2012] Warning, spatial fit 3 centroid is now closest to src. 104
[Thu Mar 29 20:31:57 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 20:31:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 20:31:57 2012] Assessing source extent using major
[Thu Mar 29 20:31:57 2012] Source does appear to be extended
[Thu Mar 29 20:31:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 20:33:03 2012] Counts = 1412.143311, rescaling region sizes by 2.000000
[Thu Mar 29 20:33:03 2012] XMMSAS src. selection expression = ellipse(37187.261047, 21778.302032, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Mar 29 20:33:03 2012] Writing source region out to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src3_src.reg
[Thu Mar 29 20:33:03 2012] Extracting stamp from image fullrun_pn_xmm0200450201_pi300-10000_cl_sm2.00.img.gz, (353, 176) - (503, 326)
[Thu Mar 29 20:33:03 2012] XMMSAS bgd. selection expression = annulus(37187.261047, 21778.302032, 4350.000000, 8700.000000, X, Y) && !ellipse(27356.203602, 27401.123600, 1430.587241, 1430.587241, 0.000000, X, Y) && !ellipse(28332.595152, 22957.318613, 471.018579, 441.711098, 11.616282, X, Y) && !ellipse(34965.290924, 22078.410614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39239.242920, 26889.663544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.617200, 20775.425200, 693.502420, 478.495214, 65.265000, X, Y) && !ellipse(33271.520294, 12904.659134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35322.344574, 22209.482773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34227.253845, 13306.199127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32149.196930, 14646.430038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32620.002655, 12322.505463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31008.824677, 12945.323563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39792.237732, 30897.289551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35773.046417, 30374.041687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36725.878021, 30068.498260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28290.202118, 28571.898071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30915.205688, 28332.916229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.624695, 26824.748077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28870.434875, 25978.401733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38962.105652, 26190.312897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28069.670074, 24909.516144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38757.331207, 24684.943146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32183.146790, 23042.111908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26233.884000, 22629.940000, 2319.120067, 2319.120067, 0.000000, X, Y) && !ellipse(30802.435974, 21987.141327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28444.892090, 21965.113876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31116.130341, 13350.192963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28154.713318, 20223.592545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29935.202515, 20224.452774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38173.099976, 20051.711258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29052.994690, 19617.459976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32066.957397, 13265.255920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32422.418500, 17206.006200, 570.895216, 570.895216, 0.000000, X, Y) && !ellipse(32983.781494, 15582.707535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33795.463776, 15642.897049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34469.782806, 15489.365997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32409.514587, 15355.592346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33708.028351, 15081.642441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32809.426400, 14952.511200, 421.288812, 421.288812, 0.000000, X, Y) && !ellipse(31856.405609, 15009.822571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34562.103485, 14889.790024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31549.254000, 14218.398000, 1887.128054, 1887.128054, 0.000000, X, Y) && !ellipse(34547.277802, 14037.229584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33230.316895, 14038.103088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30973.632263, 13853.433853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31742.054000, 12707.788000, 1469.920042, 1469.920042, 0.000000, X, Y)
[Thu Mar 29 20:33:03 2012] Writing fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src3.gif
[Thu Mar 29 20:39:53 2012] Mean detx,y = (10605.29, 3891.02) 
[Thu Mar 29 20:39:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 20:43:00 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 20:43:01 2012] Setting source spectrum file to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 29 20:43:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Mar 29 23:11:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 29 23:11:19 2012] rmf not generated due to insufficient counts
[Fri Mar 30 04:26:03 2012] Updating aperture counts using extracted products
[Fri Mar 30 04:26:03 2012] Error reading totcts from fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Mar 30 04:26:10 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 04:26:10 2012] Using photon index=1.80, rate=0.154, arf fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src3.arf
[Fri Mar 30 04:26:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 04:26:10 2012] Updating source flux to 6.2e-13
[Fri Mar 30 04:34:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting