[Wed Mar 28 16:39:01 2012] Detection parameters:
  Position = (292.2, 435.7) = 20 33 23.66 41 27 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.2 +/- 11.0
  Background counts = 25.0
  Rate = 0.003 +/- 0.0006

[Wed Mar 28 16:39:12 2012] Off-axis axis estimate = 9.96'
[Wed Mar 28 16:42:57 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 16:42:57 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Wed Mar 28 16:42:57 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Wed Mar 28 16:42:57 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 11.41"
[Wed Mar 28 22:43:54 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src22.ximg exists
[Wed Mar 28 22:43:54 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Mar 28 22:43:54 2012] Fit fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_src22 appears to have run properly
[Wed Mar 28 22:43:56 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Mar 28 22:43:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed Mar 28 22:43:56 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Mar 28 22:43:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed Mar 28 22:43:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 05:51:03 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 16.722343 pixels away
[Thu Mar 29 05:51:03 2012] Source 24 is offset by 5.760236 and 3.632901 pixels which is larger than
2 X fitted extent = 1.432437 x 1.432437, not incorporating fit results
[Thu Mar 29 05:51:03 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 05:51:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 05:51:03 2012] Assessing source extent using major
[Thu Mar 29 05:51:03 2012] Source does appear to be extended
[Thu Mar 29 05:51:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 05:52:18 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 05:52:18 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Thu Mar 29 05:52:18 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Thu Mar 29 05:52:18 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 11.41"
[Thu Mar 29 12:37:22 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src21.ximg exists
[Thu Mar 29 12:37:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src21.csv
[Thu Mar 29 12:37:22 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Mar 29 12:37:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src21.csv
[Thu Mar 29 12:37:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 12:37:24 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Mar 29 12:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Mar 29 12:37:24 2012] fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Mar 29 12:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Mar 29 12:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:31:57 2012] Spatial fit model total counts = 292.350000, observed total counts = 257.000000
[Thu Mar 29 20:31:57 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 29 20:31:57 2012] Source 24 is offset by 7.201822 and 3.624027 pixels which is larger than
2 X fitted extent = 1.257329 x 1.257329, not incorporating fit results
[Thu Mar 29 20:31:57 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 20:31:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 20:31:57 2012] Assessing source extent using major
[Thu Mar 29 20:31:57 2012] Source does appear to be extended
[Thu Mar 29 20:31:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 20:33:04 2012] XMMSAS src. selection expression = ellipse(25372.412537, 37855.890350, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 29 20:33:04 2012] Writing source region out to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src24_src.reg
[Thu Mar 29 20:33:04 2012] Extracting stamp from image fullrun_pn_xmm0200450201_pi300-10000_cl_sm2.00.img.gz, (255, 398) - (330, 473)
[Thu Mar 29 20:33:04 2012] XMMSAS bgd. selection expression = annulus(25372.412537, 37855.890350, 1087.500000, 2175.000000, X, Y) && !ellipse(24087.452698, 36584.463196, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 20:33:04 2012] Writing fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src24.gif
[Thu Mar 29 21:11:23 2012] Mean detx,y = (-3421.84, -10225.67) 
[Thu Mar 29 21:11:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 21:11:57 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 21:11:58 2012] Setting source spectrum file to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Mar 29 21:11:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu Mar 29 23:39:15 2012] Not generating rmf since there are only 61 counts
[Thu Mar 29 23:39:15 2012] rmf not generated due to insufficient counts
[Fri Mar 30 04:26:05 2012] Updating aperture counts using extracted products
[Fri Mar 30 04:26:05 2012] Error reading totcts from fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Mar 30 04:26:11 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 04:26:11 2012] Using photon index=1.80, rate=0.00339, arf fullrun_pn_xmm0200450201_pi300-10000_pass1_cl_src24.arf
[Fri Mar 30 04:26:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 04:26:11 2012] Updating source flux to 1.8e-14
[Fri Mar 30 04:34:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting