[Wed Mar 28 16:39:31 2012] Detection parameters:
  Position = (300.8, 338.8) = 20 33 20.33 41 20 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.3 +/- 10.3
  Background counts = 17.7
  Rate = 0.003 +/- 0.0006

[Wed Mar 28 16:39:35 2012] Off-axis axis estimate = 2.93'
[Thu Mar 29 02:36:37 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 02:36:37 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Thu Mar 29 02:36:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.886
[Thu Mar 29 02:36:37 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 7.89"
[Thu Mar 29 05:50:28 2012] fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_src46.ximg exists
[Thu Mar 29 05:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_src46.csv
[Thu Mar 29 05:50:28 2012] fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_src46_1.ximg exists
[Thu Mar 29 05:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_src46.csv
[Thu Mar 29 05:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 05:50:29 2012] fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Thu Mar 29 05:50:29 2012] fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Thu Mar 29 05:50:29 2012] Fit fullrun_mos2_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Thu Mar 29 05:51:38 2012] Source 39 is offset by 2.563528 and -7.441965 pixels which is larger than
2 X fitted extent = 0.968474 x 0.968474, not incorporating fit results
[Thu Mar 29 05:51:38 2012] Spatial fit model total counts = 276.827000, observed total counts = 276.000000
[Thu Mar 29 05:51:38 2012] Offset between fit and detection position for source 39 = 0.375456 pixels
[Thu Mar 29 05:51:38 2012] 261.592900 total counts/ 237.230000 bgd. counts: snr = 1.581773
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.375456 pixels
  Position = (300.8, 339.2) = 20 33 20.33 41 20 32.6
  Extent = 3.5 (2.0-5.5)", rotation angle = 0
  Source counts = 24.4 +/- 16.2
  Background counts = 237.2
  Rate = 0.001 +/- 0.0008
  Deleting source due to low Poisson probability