[Wed Mar 28 16:39:23 2012] Detection parameters:
  Position = (402.8, 160.9) = 20 32 41.08 41 7 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.6 +/- 16.1
  Background counts = 15.1
  Rate = 0.007 +/- 0.0008

[Wed Mar 28 16:39:24 2012] Off-axis axis estimate = 12.51'
[Wed Mar 28 22:43:58 2012] Using EEF radius (= 12.69 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 22:43:58 2012] Initial guess for spatial extent in simple fitting = 12.69"
[Wed Mar 28 22:43:58 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.900
[Wed Mar 28 22:43:58 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 12.69"
[Thu Mar 29 02:36:34 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src24.ximg exists
[Thu Mar 29 02:36:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src24.csv
[Thu Mar 29 02:36:34 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Mar 29 02:36:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src24.csv
[Thu Mar 29 02:36:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 02:36:35 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Mar 29 02:36:36 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Mar 29 02:36:36 2012] Fit fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Mar 29 05:51:21 2012] Spatial fit model total counts = 621.961000, observed total counts = 618.000000
[Thu Mar 29 05:51:21 2012] Offset between fit and detection position for source 61 = 4.019053 pixels
[Thu Mar 29 05:51:21 2012] Warning, changing simple spatial fit ID from 24 to 12
[Thu Mar 29 05:51:21 2012] 647.261500 total counts/ 602.971000 bgd. counts: snr = 1.803692
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 4.019053 pixels
  Position = (400.7, 157.5) = 20 32 41.88 41 7 21.9
  Extent = 9.1 (6.4-10.5)", rotation angle = 0
  Source counts = 44.3 +/- 25.4
  Background counts = 603.0
  Rate = 0.002 +/- 0.001
[Thu Mar 29 05:51:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 05:51:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 05:51:21 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 05:51:21 2012] Source does appear to be extended
[Thu Mar 29 05:51:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 12:37:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 12:37:27 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Thu Mar 29 12:37:27 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.924
[Thu Mar 29 12:37:27 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 9.14"
[Thu Mar 29 16:51:08 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src24.ximg exists
[Thu Mar 29 16:51:08 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Mar 29 16:51:08 2012] Fit fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src24 appears to have run properly
[Thu Mar 29 16:51:09 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Mar 29 16:51:09 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Mar 29 16:51:09 2012] Fit fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Mar 29 20:32:15 2012] Spatial fit model total counts = 621.739000, observed total counts = 618.000000
[Thu Mar 29 20:32:15 2012] Offset between fit and detection position for source 61 = 1.278061 pixels
[Thu Mar 29 20:32:15 2012] Warning, changing simple spatial fit ID from 24 to 12
[Thu Mar 29 20:32:15 2012] 647.131800 total counts/ 603.585000 bgd. counts: snr = 1.772503
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 1.278061 pixels
  Position = (401.5, 158.5) = 20 32 41.58 41 7 26.2
  Extent = 7.8 (5.2-10.1)", rotation angle = 0
  Source counts = 43.5 +/- 25.4
  Background counts = 603.6
  Rate = 0.002 +/- 0.001
[Thu Mar 29 20:32:15 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 20:32:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 20:32:15 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 20:32:15 2012] Source does appear to be extended
[Thu Mar 29 20:32:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 00:54:16 2012] XMMSAS src. selection expression = ellipse(34881.138000, 13742.156000, 468.546013, 468.546013, 0.000000, X, Y)
[Fri Mar 30 00:54:16 2012] Writing source region out to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src61_src.reg
[Fri Mar 30 00:54:16 2012] Extracting stamp from image fullrun_mos1_xmm0200450201_pi300-10000_cl_sm2.00.img.gz, (375, 132) - (428, 185)
[Fri Mar 30 00:54:16 2012] XMMSAS bgd. selection expression = annulus(34881.138000, 13742.156000, 780.910022, 1561.820045, X, Y) && !ellipse(33309.410400, 14842.786400, 743.200821, 743.200821, 0.000000, X, Y) && !ellipse(34529.311400, 15062.261400, 649.535219, 649.535219, 0.000000, X, Y) && !ellipse(35846.880127, 14567.295563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36809.438800, 14466.530900, 1301.072037, 402.950412, 57.517400, X, Y) && !ellipse(32812.479004, 13518.812546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37028.476900, 13567.454000, 952.264027, 952.264027, 0.000000, X, Y) && !ellipse(33822.441528, 13969.794495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32683.685000, 15774.025080, 763.064022, 763.064022, 0.000000, X, Y) && !ellipse(34032.791534, 15947.991776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35248.853363, 13073.772552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35604.453439, 15470.683312, 606.382805, 246.196820, 51.870566, X, Y) && !ellipse(36055.817657, 13466.606705, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 00:54:16 2012] Writing fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src61.gif
[Fri Mar 30 01:14:59 2012] Mean detx,y = (-11945.28, 9363.72) 
[Fri Mar 30 01:15:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 01:15:19 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 01:15:19 2012] Setting source spectrum file to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri Mar 30 01:15:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Fri Mar 30 02:47:03 2012] Not generating rmf since there are only 43 counts
[Fri Mar 30 02:47:03 2012] rmf not generated due to insufficient counts
[Fri Mar 30 04:26:17 2012] Updating aperture counts using extracted products
[Fri Mar 30 04:26:17 2012] Error reading totcts from fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri Mar 30 04:26:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 04:26:20 2012] Using photon index=1.80, rate=0.00221, arf fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src61.arf
[Fri Mar 30 04:26:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 04:26:20 2012] Updating source flux to 5.3e-14
[Fri Mar 30 04:26:32 2012] Source 61 has fewer than 100.000000 counts, skipping spectral fitting