[Wed Mar 28 16:39:21 2012] Detection parameters:
  Position = (405.7, 150.8) = 20 32 39.95 41 6 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.5 +/- 13.3
  Background counts = 14.0
  Rate = 0.005 +/- 0.0007

[Wed Mar 28 16:39:24 2012] Off-axis axis estimate = 13.23'
[Wed Mar 28 22:43:58 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 22:43:58 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Wed Mar 28 22:43:58 2012] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.878
[Wed Mar 28 22:43:58 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 13.04"
[Thu Mar 29 02:36:34 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src30.ximg exists
[Thu Mar 29 02:36:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src30.csv
[Thu Mar 29 02:36:34 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Mar 29 02:36:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src30.csv
[Thu Mar 29 02:36:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 02:36:36 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Mar 29 02:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Mar 29 02:36:36 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Mar 29 02:36:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Mar 29 02:36:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 05:51:21 2012] Warning, spatial fit 30 centroid is now closest to src. 62
[Thu Mar 29 05:51:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 05:51:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 05:51:21 2012] Assessing source extent using major
[Thu Mar 29 05:51:21 2012] Source does appear to be extended
[Thu Mar 29 05:51:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 12:37:27 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 12:37:27 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Thu Mar 29 12:37:27 2012] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.878
[Thu Mar 29 12:37:27 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 13.04"
[Thu Mar 29 16:51:08 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src30.ximg exists
[Thu Mar 29 16:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src30.csv
[Thu Mar 29 16:51:08 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu Mar 29 16:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src30.csv
[Thu Mar 29 16:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 16:51:09 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu Mar 29 16:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src30.csv
[Thu Mar 29 16:51:09 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu Mar 29 16:51:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src30.csv
[Thu Mar 29 16:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:32:15 2012] Warning, spatial fit 30 centroid is now closest to src. 65
[Thu Mar 29 20:32:15 2012] Source 44 is offset by 3.254016 and 6.374811 pixels which is larger than
2 X fitted extent = 1.521936 x 1.521936, not incorporating fit results
[Thu Mar 29 20:32:15 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 20:32:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 20:32:15 2012] Assessing source extent using major
[Thu Mar 29 20:32:15 2012] Source does appear to be extended
[Thu Mar 29 20:32:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 00:54:16 2012] XMMSAS src. selection expression = ellipse(35248.853363, 13073.772552, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 00:54:16 2012] Writing source region out to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src44_src.reg
[Fri Mar 30 00:54:16 2012] Extracting stamp from image fullrun_mos1_xmm0200450201_pi300-10000_cl_sm2.00.img.gz, (368, 113) - (443, 188)
[Fri Mar 30 00:54:16 2012] XMMSAS bgd. selection expression = annulus(35248.853363, 13073.772552, 1087.500000, 2175.000000, X, Y) && !ellipse(33309.410400, 14842.786400, 743.200821, 743.200821, 0.000000, X, Y) && !ellipse(34529.311400, 15062.261400, 649.535219, 649.535219, 0.000000, X, Y) && !ellipse(35846.880127, 14567.295563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36809.438800, 14466.530900, 1301.072037, 402.950412, 57.517400, X, Y) && !ellipse(32812.479004, 13518.812546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37028.476900, 13567.454000, 952.264027, 952.264027, 0.000000, X, Y) && !ellipse(33822.441528, 13969.794495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32683.685000, 15774.025080, 763.064022, 763.064022, 0.000000, X, Y) && !ellipse(34881.138000, 13742.156000, 624.728018, 624.728018, 0.000000, X, Y) && !ellipse(34032.791534, 15947.991776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35604.453439, 15470.683312, 606.382805, 246.196820, 51.870566, X, Y) && !ellipse(36055.817657, 13466.606705, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 00:54:16 2012] Writing fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src44.gif
[Fri Mar 30 01:17:28 2012] Mean detx,y = (-12630.49, 9799.84) 
[Fri Mar 30 01:17:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 01:17:53 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 01:17:53 2012] Setting source spectrum file to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Mar 30 01:17:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Fri Mar 30 02:47:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 30 02:47:46 2012] rmf not generated due to insufficient counts
[Fri Mar 30 04:26:17 2012] Updating aperture counts using extracted products
[Fri Mar 30 04:26:17 2012] Error reading totcts from fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Mar 30 04:26:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 04:26:20 2012] Using photon index=1.80, rate=0.00532, arf fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src44.arf
[Fri Mar 30 04:26:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 04:26:20 2012] Updating source flux to 1.3e-13
[Fri Mar 30 04:26:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting