[Wed Mar 28 16:39:19 2012] Detection parameters:
  Position = (300.4, 327.7) = 20 33 20.49 41 19 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 12.0
  Background counts = 19.4
  Rate = 0.003 +/- 0.0006

[Wed Mar 28 16:39:24 2012] Off-axis axis estimate = 2.13'
[Wed Mar 28 22:43:58 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 22:43:58 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Wed Mar 28 22:43:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.266
[Wed Mar 28 22:43:58 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 7.49"
[Thu Mar 29 02:36:34 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src50.ximg exists
[Thu Mar 29 02:36:34 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src50_1.ximg exists
[Thu Mar 29 02:36:34 2012] Fit fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_src50 appears to have run properly
[Thu Mar 29 02:36:36 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Thu Mar 29 02:36:36 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Thu Mar 29 02:36:36 2012] Fit fullrun_mos1_xmm0200450201_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Thu Mar 29 05:51:21 2012] Spatial fit model total counts = 447.522000, observed total counts = 447.000000
[Thu Mar 29 05:51:21 2012] Offset between fit and detection position for source 23 = 9.226390 pixels
[Thu Mar 29 05:51:21 2012] 447.619500 total counts/ 369.948000 bgd. counts: snr = 4.038233
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 9.226390 pixels
  Position = (306.9, 321.1) = 20 33 17.99 41 19 13.9
  Extent = 15.0 (14.9-15.0)", rotation angle = 0
  Source counts = 77.7 +/- 21.2
  Background counts = 369.9
  Rate = 0.004 +/- 0.001
[Thu Mar 29 05:51:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 05:51:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 05:51:21 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 05:51:21 2012] Source does appear to be extended
[Thu Mar 29 05:51:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 05:51:21 2012] Source is confused with source 9
[Thu Mar 29 12:37:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 12:37:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 12:37:27 2012] Initial guess for spatial extent in simple fitting = 14.97"
[Thu Mar 29 12:37:27 2012] source mask rpix=3.4, npix_max = 62, mask sum = 64, frac = 1.030
[Thu Mar 29 12:37:27 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 14.97"
[Thu Mar 29 16:51:08 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src49.ximg exists
[Thu Mar 29 16:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src49.csv
[Thu Mar 29 16:51:08 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src49_1.ximg exists
[Thu Mar 29 16:51:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src49.csv
[Thu Mar 29 16:51:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 16:51:09 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Thu Mar 29 16:51:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src49.csv
[Thu Mar 29 16:51:09 2012] fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Thu Mar 29 16:51:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src49.csv
[Thu Mar 29 16:51:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200450201_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 20:32:15 2012] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 19.471975 pixels away
[Thu Mar 29 20:32:15 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 20:32:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 20:32:15 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 20:32:15 2012] Source does appear to be extended
[Thu Mar 29 20:32:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 00:54:16 2012] XMMSAS src. selection expression = ellipse(26650.788000, 27888.212000, 898.053783, 898.053783, 0.000000, X, Y)
[Fri Mar 30 00:54:16 2012] Writing source region out to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src23_src.reg
[Fri Mar 30 00:54:16 2012] Extracting stamp from image fullrun_mos1_xmm0200450201_pi300-10000_cl_sm2.00.img.gz, (255, 269) - (359, 373)
[Fri Mar 30 00:54:16 2012] XMMSAS bgd. selection expression = annulus(26650.788000, 27888.212000, 1496.756305, 2993.512611, X, Y) && !ellipse(27330.661600, 27393.044200, 1529.236844, 1529.236844, 0.000000, X, Y) && !ellipse(27549.338980, 29221.248400, 348.522410, 348.522410, 0.000000, X, Y) && !ellipse(25789.048616, 25925.119000, 582.929617, 582.929617, 0.000000, X, Y) && !ellipse(26831.791870, 26233.820862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.602720, 24152.754600, 763.794422, 763.794422, 0.000000, X, Y) && !ellipse(26428.030945, 25167.303558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28545.926575, 27015.490692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28024.789459, 24957.139404, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 00:54:16 2012] Writing fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src23.gif
[Fri Mar 30 01:26:21 2012] Mean detx,y = (336.07, -337.25) 
[Fri Mar 30 01:26:23 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 01:26:37 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 01:26:37 2012] Setting source spectrum file to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Mar 30 01:26:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Mar 30 02:50:47 2012] Not generating rmf since there are only 77 counts
[Fri Mar 30 02:50:47 2012] rmf not generated due to insufficient counts
[Fri Mar 30 04:26:18 2012] Updating aperture counts using extracted products
[Fri Mar 30 04:26:18 2012] Error reading totcts from fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Mar 30 04:26:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 04:26:21 2012] Using photon index=1.80, rate=0.00395, arf fullrun_mos1_xmm0200450201_pi300-10000_pass1_cl_src23.arf
[Fri Mar 30 04:26:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 04:26:21 2012] Updating source flux to 3.8e-14
[Fri Mar 30 04:26:32 2012] Flag c found in src. 23 procflags, skipping spectral fitting
[Fri Mar 30 04:26:32 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting