[Fri Sep 23 10:17:24 2011] Detection parameters:
  Position = (469.2, 240.4) = 20 18 47.29 -52 42 20.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.9 +/- 15.9
  Background counts = 26.1
  Rate = 0.009 +/- 0.001

[Fri Sep 23 10:17:24 2011] Off-axis axis estimate = 13.07'
[Fri Sep 23 11:37:29 2011] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 11:37:29 2011] Initial guess for spatial extent in simple fitting = 12.96"
[Fri Sep 23 11:37:29 2011] source mask rpix=3.0, npix_max = 48, mask sum = 39, frac = 0.805
[Fri Sep 23 11:37:29 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 12.96"
[Fri Sep 23 12:17:08 2011] fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_src5.ximg exists
[Fri Sep 23 12:17:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_src5.csv
[Fri Sep 23 12:17:08 2011] fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Sep 23 12:17:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_src5.csv
[Fri Sep 23 12:17:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 12:17:09 2011] fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep 23 12:17:09 2011] fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep 23 12:17:09 2011] Fit fullrun_mos2_xmm0200430601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep 23 12:17:22 2011] Spatial fit model total counts = 808.733000, observed total counts = 805.000000
[Fri Sep 23 12:17:22 2011] Offset between fit and detection position for source 5 = 2.539387 pixels
[Fri Sep 23 12:17:22 2011] Warning, changing simple spatial fit ID from 5 to 3
[Fri Sep 23 12:17:22 2011] 736.742300 total counts/ 58.537300 bgd. counts: snr = 88.643040
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.539387 pixels
  Position = (469.5, 237.9) = 20 18 47.10 -52 42 31.0
  Extent = 26.0 (25.8-26.0)", rotation angle = 0
  Source counts = 678.2 +/- 27.1
  Background counts = 58.5
  Rate = 0.06 +/- 0.002
[Fri Sep 23 12:17:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 12:17:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 12:17:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 12:17:22 2011] Source does appear to be extended
[Fri Sep 23 12:17:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 12:17:22 2011] Source is confused with source 1
[Fri Sep 23 13:27:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 13:27:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 13:27:27 2011] Initial guess for spatial extent in simple fitting = 25.97"
[Fri Sep 23 13:27:27 2011] source mask rpix=6.0, npix_max = 167, mask sum = 134, frac = 0.800
[Fri Sep 23 13:27:27 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 25.97"
[Fri Sep 23 13:57:35 2011] fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_src5.ximg exists
[Fri Sep 23 13:57:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_src5.csv
[Fri Sep 23 13:57:35 2011] fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Sep 23 13:57:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_src5.csv
[Fri Sep 23 13:57:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 13:57:36 2011] fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep 23 13:57:36 2011] fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep 23 13:57:36 2011] Fit fullrun_mos2_xmm0200430601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep 23 13:57:44 2011] Warning, spatial fit 5 centroid is now closest to src. 4
[Fri Sep 23 13:57:44 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 13:57:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 13:57:44 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 13:57:44 2011] Source does appear to be extended
[Fri Sep 23 13:57:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 14:34:27 2011] XMMSAS src. selection expression = ellipse(40801.213400, 20650.218000, 1558.134045, 1558.134045, 0.000000, X, Y)
[Fri Sep 23 14:34:27 2011] Writing source region out to fullrun_mos2_xmm0200430601_pi300-10000_pass1_cl_src5_src.reg
[Fri Sep 23 14:34:27 2011] Extracting stamp from image fullrun_mos2_xmm0200430601_pi300-10000_cl_sm2.00.img.gz, (380, 148) - (559, 327)
[Fri Sep 23 14:34:27 2011] XMMSAS bgd. selection expression = annulus(40801.213400, 20650.218000, 2596.890075, 5193.780149, X, Y) && !ellipse(40686.541870, 20261.182449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36370.629000, 17473.191200, 263.581608, 263.581608, 0.000000, X, Y) && !ellipse(40757.084300, 21181.854000, 2424.864070, 2424.864070, 0.000000, X, Y) && !ellipse(40869.056549, 21784.399307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40289.227356, 21874.961029, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 23 14:34:27 2011] Writing fullrun_mos2_xmm0200430601_pi300-10000_pass1_cl_src5.gif
[Fri Sep 23 14:34:58 2011] Mean detx,y = (-14253.26, 746.13) 
[Fri Sep 23 14:34:58 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 23 14:35:21 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 23 14:35:22 2011] Setting source spectrum file to fullrun_mos2_xmm0200430601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Sep 23 14:35:22 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0200430601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Sep 23 14:51:39 2011] Updating aperture counts using extracted products
[Fri Sep 23 14:51:39 2011] Error reading totcts from fullrun_mos2_xmm0200430601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Sep 23 14:51:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 14:51:39 2011] Using photon index=1.80, rate=0.0581, arf fullrun_mos2_xmm0200430601_pi300-10000_pass1_cl_src5.arf
[Fri Sep 23 14:51:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 23 14:51:39 2011] Updating source flux to 1.1e-12
[Fri Sep 23 14:52:02 2011] Flag c found in src. 5 procflags, skipping spectral fitting