[Thu Oct  6 05:08:21 2011] Detection parameters:
  Position = (138.4, 406.3) = 11 33 55.01 53 3 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.1 +/- 9.0
  Background counts = 9.0
  Rate = 0.004 +/- 0.0008

[Thu Oct  6 05:08:23 2011] Off-axis axis estimate = 13.99'
[Thu Oct  6 05:10:13 2011] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 05:10:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 05:10:13 2011] Initial guess for spatial extent in simple fitting = 13.42"
[Thu Oct  6 05:10:13 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.953
[Thu Oct  6 05:10:13 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 13.42"
[Thu Oct  6 06:06:50 2011] fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_src13.ximg exists
[Thu Oct  6 06:06:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_src13.csv
[Thu Oct  6 06:06:50 2011] fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Oct  6 06:06:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_src13.csv
[Thu Oct  6 06:06:50 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:06:50 2011] fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Oct  6 06:06:50 2011] fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Oct  6 06:06:50 2011] Fit fullrun_pn_xmm0200430501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu Oct  6 07:23:39 2011] Spatial fit model total counts = 153.110000, observed total counts = 153.000000
[Thu Oct  6 07:23:39 2011] Offset between fit and detection position for source 13 = 0.250987 pixels
[Thu Oct  6 07:23:39 2011] 153.538200 total counts/ 137.871000 bgd. counts: snr = 1.334304
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.250987 pixels
  Position = (138.6, 406.4) = 11 33 54.90 53 3 6.2
  Extent = 3.4" x 3.4", rotation angle = 0
  Source counts = 15.7 +/- 12.4
  Background counts = 137.9
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability