[Thu Oct  6 05:08:24 2011] Detection parameters:
  Position = (302.2, 417.2) = 11 32 35.96 53 3 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.4 +/- 16.3
  Background counts = 4.9
  Rate = 0.03 +/- 0.002

[Thu Oct  6 05:08:26 2011] Off-axis axis estimate = 8.62'
[Thu Oct  6 06:06:51 2011] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 06:06:51 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 06:06:51 2011] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Oct  6 06:06:51 2011] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.851
[Thu Oct  6 06:06:51 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.74"
[Thu Oct  6 06:39:20 2011] fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Oct  6 06:39:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_src1.csv
[Thu Oct  6 06:39:20 2011] fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Oct  6 06:39:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_src1.csv
[Thu Oct  6 06:39:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 06:39:20 2011] fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 06:39:20 2011] fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 06:39:20 2011] Fit fullrun_mos1_xmm0200430501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 07:23:44 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.253892 pixels away
[Thu Oct  6 07:23:44 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 07:23:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 07:23:44 2011] Assessing source extent using major
[Thu Oct  6 07:23:44 2011] Source does appear to be extended
[Thu Oct  6 07:23:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 07:23:44 2011] Source is confused with source 7
[Thu Oct  6 08:10:39 2011] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 08:10:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct  6 08:10:39 2011] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Oct  6 08:10:39 2011] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.851
[Thu Oct  6 08:10:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.74"
[Thu Oct  6 08:41:03 2011] fullrun_mos1_xmm0200430501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Oct  6 08:41:03 2011] fullrun_mos1_xmm0200430501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Oct  6 08:41:03 2011] Fit fullrun_mos1_xmm0200430501_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Oct  6 08:41:04 2011] fullrun_mos1_xmm0200430501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 08:41:04 2011] fullrun_mos1_xmm0200430501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 08:41:04 2011] Fit fullrun_mos1_xmm0200430501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 09:14:57 2011] Spatial fit model total counts = 475.770000, observed total counts = 447.000000
[Thu Oct  6 09:14:57 2011] Offset between fit and detection position for source 1 = 0.684771 pixels
[Thu Oct  6 09:14:57 2011] 493.989000 total counts/ 363.659000 bgd. counts: snr = 6.834350
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.684771 pixels
  Position = (301.8, 417.8) = 11 32 36.16 53 3 57.4
  Extent = 6.3" x 4.8", rotation angle = 36
  Source counts = 130.3 +/- 22.2
  Background counts = 363.7
  Rate = 0.01 +/- 0.002
[Thu Oct  6 09:14:57 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 09:14:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 09:14:57 2011] Assessing source extent using major
[Thu Oct  6 09:14:57 2011] Source does appear to be extended
[Thu Oct  6 09:14:57 2011] Computing asymmetry using major and minor axis, asym = 1.32
[Thu Oct  6 09:40:20 2011] XMMSAS src. selection expression = ellipse(26209.254208, 36296.775977, 377.480958, 287.035308, 36.119650, X, Y)
[Thu Oct  6 09:40:20 2011] Writing source region out to fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1_src.reg
[Thu Oct  6 09:40:20 2011] Extracting stamp from image fullrun_mos1_xmm0200430501_pi300-10000_cl_sm2.00.img.gz, (280, 396) - (324, 439)
[Thu Oct  6 09:40:20 2011] XMMSAS bgd. selection expression = annulus(26209.254208, 36296.775977, 629.134930, 1258.269860, X, Y) && !ellipse(26522.390686, 36685.311829, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Oct  6 09:40:20 2011] Writing fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1.gif
[Thu Oct  6 09:40:22 2011] Mean detx,y = (5769.72, 6118.16) 
[Thu Oct  6 09:40:23 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 09:40:43 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 09:40:43 2011] Setting source spectrum file to fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 09:40:43 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Oct  6 10:04:26 2011] Updating aperture counts using extracted products
[Thu Oct  6 10:04:26 2011] Error reading totcts from fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 10:04:27 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 10:04:27 2011] Using photon index=1.80, rate=0.0106, arf fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 10:04:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 10:04:27 2011] Updating source flux to 2.3e-13
[Thu Oct  6 10:04:33 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Oct  6 10:04:51 2011] Reading fit data from xmm0200430501/analysis//spectral/fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1_pl.csv
[Thu Oct  6 10:04:51 2011] Spectral fit parameter nH value = 3.9455e+21
[Thu Oct  6 10:04:51 2011] Spectral fit parameter PhoIndex value = 1.19793
[Thu Oct  6 10:04:51 2011] Failed to get F(0.3-8.0) from xmm0200430501/analysis//spectral/fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 10:04:51 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 10:04:51 2011] Using Nh = 3.9e+21, photon index=1.20, rate=0.0106, arf fullrun_mos1_xmm0200430501_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 10:04:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 10:04:51 2011] Updating source flux to 4.1e-13