[Sun Jun 10 17:09:56 2012] Detection parameters:
  Position = (372.7, 139.2) = 3 30 25.03 -3 20 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.4 +/- 7.2
  Background counts = 2.5
  Rate = 0.003 +/- 0.0006

[Sun Jun 10 17:09:56 2012] Off-axis axis estimate = 12.74'
[Sun Jun 10 18:04:52 2012] Using EEF radius (= 12.80 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 18:04:52 2012] Initial guess for spatial extent in simple fitting = 12.80"
[Sun Jun 10 18:04:52 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.034
[Sun Jun 10 18:04:52 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.80"
[Sun Jun 10 18:24:25 2012] fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun 10 18:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_src12.csv
[Sun Jun 10 18:24:25 2012] fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun 10 18:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_src12.csv
[Sun Jun 10 18:24:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 18:24:25 2012] fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun 10 18:24:25 2012] fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun 10 18:24:25 2012] Fit fullrun_mos2_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Jun 10 18:24:33 2012] Spatial fit model total counts = 53.907300, observed total counts = 54.000000
[Sun Jun 10 18:24:33 2012] Offset between fit and detection position for source 12 = 0.076822 pixels
[Sun Jun 10 18:24:33 2012] 56.060300 total counts/ 34.169400 bgd. counts: snr = 3.744941
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.076822 pixels
  Position = (372.7, 139.1) = 3 30 25.04 -3 20 43.7
  Extent = 6.8 (4.1-13.1)", rotation angle = 0
  Source counts = 21.9 +/- 7.5
  Background counts = 34.2
  Rate = 0.002 +/- 0.0006
[Sun Jun 10 18:24:33 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 18:24:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 18:24:33 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 18:24:33 2012] Source does appear to be extended
[Sun Jun 10 18:24:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 19:11:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 19:11:20 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Sun Jun 10 19:11:20 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.948
[Sun Jun 10 19:11:20 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 6.76"
[Sun Jun 10 19:27:51 2012] fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun 10 19:27:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_src12.csv
[Sun Jun 10 19:27:51 2012] fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun 10 19:27:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_src12.csv
[Sun Jun 10 19:27:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:27:51 2012] fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun 10 19:27:51 2012] fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun 10 19:27:51 2012] Fit fullrun_mos2_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jun 10 19:27:57 2012] Warning, spatial fit 12 centroid is now closest to src. 1
[Sun Jun 10 19:27:57 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 19:27:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 19:27:57 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 19:27:57 2012] Source does appear to be extended
[Sun Jun 10 19:27:57 2012] Computing asymmetry using major and minor axis, asym = 1.00