[Sun Jun 10 17:09:37 2012] Detection parameters:
  Position = (409.1, 267.0) = 3 30 14.46 -3 11 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.9 +/- 9.9
  Background counts = 2.8
  Rate = 0.009 +/- 0.001

[Sun Jun 10 17:09:38 2012] Off-axis axis estimate = 8.34'
[Sun Jun 10 17:45:33 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:45:33 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Sun Jun 10 17:45:33 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.870
[Sun Jun 10 17:45:33 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.60"
[Sun Jun 10 18:04:52 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 10 18:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src5.csv
[Sun Jun 10 18:04:52 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 10 18:04:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src5.csv
[Sun Jun 10 18:04:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 18:04:52 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 10 18:04:52 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 10 18:04:52 2012] Fit fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun 10 18:24:32 2012] Spatial fit model total counts = 96.265200, observed total counts = 91.000000
[Sun Jun 10 18:24:32 2012] Offset between fit and detection position for source 7 = 0.210123 pixels
[Sun Jun 10 18:24:32 2012] 97.385000 total counts/ 36.131000 bgd. counts: snr = 10.190476
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.210123 pixels
  Position = (408.9, 266.9) = 3 30 14.52 -3 11 27.9
  Extent = 6.8 (4.6-10.0)", rotation angle = 0
  Source counts = 61.3 +/- 9.9
  Background counts = 36.1
  Rate = 0.005 +/- 0.0008
[Sun Jun 10 18:24:32 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 18:24:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 18:24:32 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 18:24:32 2012] Source does appear to be extended
[Sun Jun 10 18:24:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 18:54:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 18:54:30 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Sun Jun 10 18:54:30 2012] source mask rpix=1.6, npix_max = 16, mask sum = 15, frac = 0.883
[Sun Jun 10 18:54:30 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.79"
[Sun Jun 10 19:11:20 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun 10 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src4.csv
[Sun Jun 10 19:11:20 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun 10 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src4.csv
[Sun Jun 10 19:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:11:20 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun 10 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 10 19:11:20 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun 10 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun Jun 10 19:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:27:55 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Sun Jun 10 19:27:55 2012] Source 4 in spatial fitting is no longer close to this source
[Sun Jun 10 19:27:55 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 19:27:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 19:27:55 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 19:27:55 2012] Source does appear to be extended
[Sun Jun 10 19:27:55 2012] Computing asymmetry using major and minor axis, asym = 1.00