[Sun Jun 10 17:09:37 2012] Detection parameters:
  Position = (270.3, 367.8) = 3 30 54.78 -3 4 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.9 +/- 20.9
  Background counts = 3.0
  Rate = 0.04 +/- 0.003

[Sun Jun 10 17:09:38 2012] Off-axis axis estimate = 5.43'
[Sun Jun 10 17:45:33 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Sun Jun 10 17:45:33 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Sun Jun 10 17:45:33 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.923
[Sun Jun 10 17:45:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.14"
[Sun Jun 10 18:04:52 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 10 18:04:52 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 10 18:04:52 2012] Fit fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jun 10 18:04:52 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 10 18:04:52 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 10 18:04:52 2012] Fit fullrun_mos1_xmm0200430401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 10 18:24:32 2012] Spatial fit model total counts = 314.314000, observed total counts = 287.000000
[Sun Jun 10 18:24:32 2012] Offset between fit and detection position for source 4 = 0.209759 pixels
[Sun Jun 10 18:24:32 2012] 316.758000 total counts/ 118.213000 bgd. counts: snr = 18.261075
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.209759 pixels
  Position = (270.1, 367.7) = 3 30 54.83 -3 4 9.5
  Extent = 5.0 (4.5-5.7)", rotation angle = 0
  Source counts = 198.5 +/- 17.8
  Background counts = 118.2
  Rate = 0.02 +/- 0.002
[Sun Jun 10 18:24:32 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 18:24:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 18:24:32 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 18:24:32 2012] Source does appear to be extended
[Sun Jun 10 18:24:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 18:54:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 10 18:54:30 2012] Initial guess for spatial extent in simple fitting = 4.99"
[Sun Jun 10 18:54:30 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.105
[Sun Jun 10 18:54:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.99"
[Sun Jun 10 19:11:20 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 10 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 10 19:11:20 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 10 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src1.csv
[Sun Jun 10 19:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:11:20 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 10 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 10 19:11:20 2012] fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 10 19:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 10 19:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200430401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 19:27:55 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Sun Jun 10 19:27:55 2012] Source 1 in spatial fitting is no longer close to this source
[Sun Jun 10 19:27:55 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 19:27:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 19:27:55 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 19:27:55 2012] Source does appear to be extended
[Sun Jun 10 19:27:55 2012] Computing asymmetry using major and minor axis, asym = 1.00