[Sat Aug 18 09:43:34 2012] Detection parameters:
  Position = (231.6, 288.1) = 0 13 43.02 -19 29 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.7 +/- 17.4
  Background counts = 50.9
  Rate = 0.005 +/- 0.0007

[Sat Aug 18 09:43:35 2012] Off-axis axis estimate = 4.90'
[Sat Aug 18 16:17:30 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 16:17:30 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Sat Aug 18 16:17:30 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.697
[Sat Aug 18 16:17:30 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.88"
[Sat Aug 18 19:49:58 2012] fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_src18.ximg exists
[Sat Aug 18 19:49:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_src18.csv
[Sat Aug 18 19:49:58 2012] fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Aug 18 19:49:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_src18.csv
[Sat Aug 18 19:49:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 19:50:00 2012] fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Aug 18 19:50:00 2012] fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Aug 18 19:50:00 2012] Fit fullrun_mos2_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Aug 18 19:50:46 2012] Warning, spatial fit 18 centroid is now closest to src. 62
[Sat Aug 18 19:50:46 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.119436 pixels away
[Sat Aug 18 19:50:46 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 19:50:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 19:50:46 2012] Assessing source extent using major
[Sat Aug 18 19:50:46 2012] Source does appear to be extended
[Sat Aug 18 19:50:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 19:50:46 2012] Source is confused with source 63
[Sun Aug 19 01:31:22 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 01:31:22 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Sun Aug 19 01:31:22 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.697
[Sun Aug 19 01:31:22 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.88"
[Sun Aug 19 03:56:02 2012] fullrun_mos2_xmm0200270101_pi300-10000_cl_pass1_src16.ximg exists
[Sun Aug 19 03:56:02 2012] fullrun_mos2_xmm0200270101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Aug 19 03:56:02 2012] Fit fullrun_mos2_xmm0200270101_pi300-10000_cl_pass1_src16 appears to have run properly
[Sun Aug 19 03:56:03 2012] fullrun_mos2_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Aug 19 03:56:03 2012] fullrun_mos2_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Aug 19 03:56:03 2012] Fit fullrun_mos2_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Aug 19 03:56:40 2012] Source 21 is offset by -5.086814 and 2.873806 pixels which is larger than
2 X fitted extent = 1.117986 x 1.117986, not incorporating fit results
[Sun Aug 19 03:56:40 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 03:56:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 03:56:40 2012] Assessing source extent using major
[Sun Aug 19 03:56:40 2012] Source does appear to be extended
[Sun Aug 19 03:56:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 13:47:42 2012] XMMSAS src. selection expression = ellipse(20103.593185, 25013.787109, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 19 13:47:42 2012] Writing source region out to fullrun_mos2_xmm0200270101_pi300-10000_pass1_cl_src21_src.reg
[Sun Aug 19 13:47:42 2012] Extracting stamp from image fullrun_mos2_xmm0200270101_pi300-10000_cl_sm2.00.img.gz, (194, 251) - (269, 326)
[Sun Aug 19 13:47:42 2012] XMMSAS bgd. selection expression = annulus(20103.593185, 25013.787109, 1087.500000, 2175.000000, X, Y) && !ellipse(17897.558548, 23419.858856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21498.088000, 24772.654000, 2350.232068, 2350.232068, 0.000000, X, Y) && !ellipse(21925.168000, 24601.692000, 1265.304036, 1265.304036, 0.000000, X, Y) && !ellipse(21304.790000, 25126.564000, 1189.960034, 1189.960034, 0.000000, X, Y) && !ellipse(21359.840000, 24890.730000, 1371.896039, 1371.896039, 0.000000, X, Y) && !ellipse(22077.688000, 25178.340000, 1253.576036, 1253.576036, 0.000000, X, Y) && !ellipse(22561.891449, 25535.821625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21506.968000, 25468.816000, 1339.368039, 1339.368039, 0.000000, X, Y) && !ellipse(21255.285156, 26042.775574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23126.348022, 24415.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20429.836548, 26059.042938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20261.356354, 25458.958527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20207.476517, 23381.429962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21648.550751, 26834.733643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23369.290000, 26310.232000, 1213.464035, 1213.464035, 0.000000, X, Y) && !ellipse(22845.156525, 27534.190491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19896.184952, 26320.881927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21377.393936, 23229.843719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21083.186157, 27014.396820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21228.106949, 26646.468170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19562.026000, 27592.940000, 1425.000041, 1425.000041, 0.000000, X, Y)
[Sun Aug 19 13:47:42 2012] Writing fullrun_mos2_xmm0200270101_pi300-10000_pass1_cl_src21.gif
[Sun Aug 19 14:09:09 2012] Mean detx,y = (-3783.74, 1402.81) 
[Sun Aug 19 14:09:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 14:09:22 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 14:09:23 2012] Setting source spectrum file to fullrun_mos2_xmm0200270101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Aug 19 14:09:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200270101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Aug 19 17:39:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 19 17:39:46 2012] rmf not generated due to insufficient counts
[Sun Aug 19 17:51:37 2012] Updating aperture counts using extracted products
[Sun Aug 19 17:51:37 2012] Error reading totcts from fullrun_mos2_xmm0200270101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sun Aug 19 17:51:39 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 17:51:39 2012] Using photon index=1.80, rate=0.00499, arf fullrun_mos2_xmm0200270101_pi300-10000_pass1_cl_src21.arf
[Sun Aug 19 17:51:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 17:51:39 2012] Updating source flux to 6.4e-14
[Sun Aug 19 17:56:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting