[Sat Aug 18 09:43:01 2012] Detection parameters:
  Position = (226.8, 275.4) = 0 13 44.50 -19 30 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 356.1 +/- 27.7
  Background counts = 47.5
  Rate = 0.01 +/- 0.001

[Sat Aug 18 09:43:02 2012] Off-axis axis estimate = 5.45'
[Sat Aug 18 13:20:55 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 13:20:55 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Sat Aug 18 13:20:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.663
[Sat Aug 18 13:20:55 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.16"
[Sat Aug 18 16:17:27 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Aug 18 16:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src5.csv
[Sat Aug 18 16:17:27 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Aug 18 16:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src5.csv
[Sat Aug 18 16:17:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 16:17:28 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Aug 18 16:17:28 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Aug 18 16:17:28 2012] Fit fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Aug 18 19:50:32 2012] Spatial fit model total counts = 938.623000, observed total counts = 1009.000000
[Sat Aug 18 19:50:32 2012] Offset between fit and detection position for source 4 = 0.978648 pixels
[Sat Aug 18 19:50:32 2012] 952.308600 total counts/ 857.640000 bgd. counts: snr = 3.232611
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.978648 pixels
  Position = (227.0, 274.4) = 0 13 44.46 -19 30 49.1
  Extent = 4.4 (3.3-5.9)", rotation angle = 0
  Source counts = 94.7 +/- 30.9
  Background counts = 857.6
  Rate = 0.003 +/- 0.0009
[Sat Aug 18 19:50:32 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 19:50:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 19:50:32 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 19:50:32 2012] Source does appear to be extended
[Sat Aug 18 19:50:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 19:50:32 2012] Source is confused with source 16
[Sat Aug 18 22:41:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 22:41:04 2012] Initial guess for spatial extent in simple fitting = 4.38"
[Sat Aug 18 22:41:04 2012] source mask rpix=1.0, npix_max = 9, mask sum = 5, frac = 0.550
[Sat Aug 18 22:41:04 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.38"
[Sun Aug 19 01:31:20 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Aug 19 01:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src5.csv
[Sun Aug 19 01:31:20 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Aug 19 01:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src5.csv
[Sun Aug 19 01:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 01:31:21 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Aug 19 01:31:21 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Aug 19 01:31:21 2012] Fit fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Aug 19 03:56:30 2012] Spatial fit model total counts = 898.190000, observed total counts = 967.000000
[Sun Aug 19 03:56:30 2012] Offset between fit and detection position for source 4 = 0.029159 pixels
[Sun Aug 19 03:56:30 2012] 845.907000 total counts/ 740.933000 bgd. counts: snr = 3.856491
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.029159 pixels
  Position = (227.0, 274.4) = 0 13 44.46 -19 30 49.2
  Extent = 4.8 (3.3-6.7)", rotation angle = 0
  Source counts = 105.0 +/- 29.1
  Background counts = 740.9
  Rate = 0.003 +/- 0.0009
[Sun Aug 19 03:56:30 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 03:56:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 03:56:30 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 03:56:30 2012] Source does appear to be extended
[Sun Aug 19 03:56:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 10:36:27 2012] XMMSAS src. selection expression = ellipse(19696.400800, 23821.749400, 289.477808, 289.477808, 0.000000, X, Y)
[Sun Aug 19 10:36:27 2012] Writing source region out to fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src4_src.reg
[Sun Aug 19 10:36:27 2012] Extracting stamp from image fullrun_mos1_xmm0200270101_pi300-10000_cl_sm2.00.img.gz, (210, 258) - (244, 291)
[Sun Aug 19 10:36:27 2012] XMMSAS bgd. selection expression = annulus(19696.400800, 23821.749400, 482.463014, 964.926028, X, Y) && !ellipse(21592.304000, 24889.648000, 1509.416043, 1509.416043, 0.000000, X, Y) && !ellipse(20877.944000, 23496.874000, 1368.832039, 1368.832039, 0.000000, X, Y) && !ellipse(17884.319244, 23637.146454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20159.932000, 23964.118000, 1392.856040, 1392.856040, 0.000000, X, Y) && !ellipse(20351.482000, 26233.316000, 2884.784083, 2884.784083, 0.000000, X, Y) && !ellipse(19789.605438, 25612.626312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20139.133408, 25250.358185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19571.213348, 24616.390289, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 19 10:36:27 2012] Writing fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src4.gif
[Sun Aug 19 10:39:04 2012] Mean detx,y = (2880.65, 3607.73) 
[Sun Aug 19 10:39:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 10:39:26 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 10:39:26 2012] Setting source spectrum file to fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Aug 19 10:39:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Aug 19 17:51:31 2012] Updating aperture counts using extracted products
[Sun Aug 19 17:51:31 2012] Error reading totcts from fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Aug 19 17:51:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 17:51:33 2012] Using photon index=1.80, rate=0.00311, arf fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src4.arf
[Sun Aug 19 17:51:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 17:51:33 2012] Updating source flux to 5.1e-14
[Sun Aug 19 17:51:42 2012] Flag c found in src. 4 procflags, skipping spectral fitting