[Sat Aug 18 09:43:01 2012] Detection parameters:
  Position = (244.0, 276.4) = 0 13 39.20 -19 30 36.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.8 +/- 22.6
  Background counts = 52.4
  Rate = 0.008 +/- 0.0007

[Sat Aug 18 09:43:02 2012] Off-axis axis estimate = 4.25'
[Sat Aug 18 13:20:55 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 13:20:55 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Sat Aug 18 13:20:55 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.986
[Sat Aug 18 13:20:55 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.56"
[Sat Aug 18 16:17:27 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src8.ximg exists
[Sat Aug 18 16:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src8.csv
[Sat Aug 18 16:17:27 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Aug 18 16:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src8.csv
[Sat Aug 18 16:17:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 16:17:28 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Aug 18 16:17:28 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Aug 18 16:17:28 2012] Fit fullrun_mos1_xmm0200270101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Aug 18 19:50:32 2012] Spatial fit model total counts = 1930.930000, observed total counts = 1850.000000
[Sat Aug 18 19:50:32 2012] Offset between fit and detection position for source 17 = 6.789055 pixels
[Sat Aug 18 19:50:32 2012] 2038.010000 total counts/ 1848.220000 bgd. counts: snr = 4.414652
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 6.789055 pixels
  Position = (240.5, 270.6) = 0 13 40.29 -19 31 5.5
  Extent = 17.1 (17.1-34.2)", rotation angle = 0
  Source counts = 189.8 +/- 45.1
  Background counts = 1848.2
  Rate = 0.006 +/- 0.001
[Sat Aug 18 19:50:32 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 19:50:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 19:50:32 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 19:50:32 2012] Source does appear to be extended
[Sat Aug 18 19:50:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 19:50:32 2012] Source is confused with source 16
[Sat Aug 18 22:41:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 22:41:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 18 22:41:04 2012] Initial guess for spatial extent in simple fitting = 17.11"
[Sat Aug 18 22:41:04 2012] source mask rpix=3.9, npix_max = 78, mask sum = 81, frac = 1.030
[Sat Aug 18 22:41:04 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 17.11"
[Sun Aug 19 01:31:20 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src8.ximg exists
[Sun Aug 19 01:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src8.csv
[Sun Aug 19 01:31:20 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Aug 19 01:31:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src8.csv
[Sun Aug 19 01:31:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 01:31:21 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Aug 19 01:31:21 2012] fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Aug 19 01:31:21 2012] Fit fullrun_mos1_xmm0200270101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Aug 19 03:56:30 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.513744 pixels away
[Sun Aug 19 03:56:30 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.845067 pixels away
[Sun Aug 19 03:56:30 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 03:56:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 03:56:30 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 03:56:30 2012] Source does appear to be extended
[Sun Aug 19 03:56:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 10:36:27 2012] XMMSAS src. selection expression = ellipse(20877.944000, 23496.874000, 1026.624030, 1026.624030, 0.000000, X, Y)
[Sun Aug 19 10:36:27 2012] Writing source region out to fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src17_src.reg
[Sun Aug 19 10:36:27 2012] Extracting stamp from image fullrun_mos1_xmm0200270101_pi300-10000_cl_sm2.00.img.gz, (182, 212) - (300, 330)
[Sun Aug 19 10:36:27 2012] XMMSAS bgd. selection expression = annulus(20877.944000, 23496.874000, 1711.040049, 3422.080098, X, Y) && !ellipse(16823.932404, 20286.832687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21843.358000, 25196.720000, 754.708022, 754.708022, 0.000000, X, Y) && !ellipse(21592.304000, 24889.648000, 1509.416043, 1509.416043, 0.000000, X, Y) && !ellipse(19696.400800, 23821.749400, 385.970411, 385.970411, 0.000000, X, Y) && !ellipse(21010.640000, 25289.042000, 204.009606, 204.009606, 0.000000, X, Y) && !ellipse(22701.484000, 25734.068000, 1262.648036, 1262.648036, 0.000000, X, Y) && !ellipse(18304.169897, 21117.786347, 455.672596, 342.347977, 232.955613, X, Y) && !ellipse(22482.575104, 25178.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17884.319244, 23637.146454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20159.932000, 23964.118000, 1392.856040, 1392.856040, 0.000000, X, Y) && !ellipse(23909.608215, 25786.002380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23318.696000, 26258.058000, 2401.600069, 2401.600069, 0.000000, X, Y) && !ellipse(20351.482000, 26233.316000, 2884.784083, 2884.784083, 0.000000, X, Y) && !ellipse(22154.478531, 26650.386993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22757.298950, 26572.164520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23673.076000, 25539.708000, 1162.576033, 1162.576033, 0.000000, X, Y) && !ellipse(24300.680756, 26399.584961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21128.292450, 26736.948914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23235.814880, 24926.176453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21957.648400, 27217.154000, 1284.048037, 1284.048037, 0.000000, X, Y) && !ellipse(22620.262000, 22959.862000, 1315.312038, 1315.312038, 0.000000, X, Y) && !ellipse(19789.605438, 25612.626312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20139.133408, 25250.358185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23531.133400, 27096.896000, 1206.840035, 1206.840035, 0.000000, X, Y) && !ellipse(24243.863129, 27089.746552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24829.854645, 26235.052795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24571.307892, 25703.829224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19571.213348, 24616.390289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22713.841431, 27614.329895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23739.424000, 24655.162000, 1219.000035, 1219.000035, 0.000000, X, Y) && !ellipse(19583.577400, 26994.874000, 1442.392042, 1442.392042, 0.000000, X, Y)
[Sun Aug 19 10:36:27 2012] Writing fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src17.gif
[Sun Aug 19 10:40:27 2012] Mean detx,y = (2531.65, 2429.55) 
[Sun Aug 19 10:40:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 10:40:44 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 10:40:44 2012] Setting source spectrum file to fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Aug 19 10:40:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Aug 19 17:51:31 2012] Updating aperture counts using extracted products
[Sun Aug 19 17:51:31 2012] Error reading totcts from fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Aug 19 17:51:34 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 17:51:34 2012] Using photon index=1.80, rate=0.00562, arf fullrun_mos1_xmm0200270101_pi300-10000_pass1_cl_src17.arf
[Sun Aug 19 17:51:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 17:51:34 2012] Updating source flux to 5.5e-14
[Sun Aug 19 17:51:42 2012] Flag c found in src. 17 procflags, skipping spectral fitting