[Sat Sep  1 14:47:13 2012] Detection parameters:
  Position = (273.8, 301.4) = 12 29 52.63 8 1 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 307.6 +/- 26.7
  Background counts = 236.9
  Rate = 0.004 +/- 0.0004

[Sat Sep  1 14:47:14 2012] Off-axis axis estimate = 1.80'
[Sat Sep  1 14:48:13 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 14:48:13 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Sat Sep  1 14:48:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.576
[Sat Sep  1 14:48:13 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.33"
[Sat Sep  1 19:18:53 2012] fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_src37.ximg exists
[Sat Sep  1 19:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_src37.csv
[Sat Sep  1 19:18:53 2012] fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Sep  1 19:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_src37.csv
[Sat Sep  1 19:18:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 19:18:55 2012] fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Sep  1 19:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Sep  1 19:18:55 2012] fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Sep  1 19:18:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Sep  1 19:18:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200130101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 19:19:12 2012] Spatial fit model total counts = 2197.670000, observed total counts = 2008.000000
[Sat Sep  1 19:19:12 2012] Offset between fit and detection position for source 37 = 1.325952 pixels
[Sat Sep  1 19:19:12 2012] Warning, changing simple spatial fit ID from 37 to 28
[Sat Sep  1 19:19:12 2012] 2118.689300 total counts/ 2066.720000 bgd. counts: snr = 1.143157
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 1.325952 pixels
  Position = (272.9, 302.4) = 12 29 52.90 8 1 58.1
  Extent = 3.2 (1.8-5.8)", rotation angle = 0
  Source counts = 52.0 +/- 46.0
  Background counts = 2066.7
  Rate = 0.0006 +/- 0.0005
  Deleting source due to low Poisson probability