[Sun Feb 12 11:41:09 2012] Detection parameters:
  Position = (263.9, 268.8) = 11 13 25.67 6 9 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.2 +/- 13.5
  Background counts = 40.5
  Rate = 0.0005 +/- 0.0001

[Sun Feb 12 11:41:09 2012] Off-axis axis estimate = 3.30'
[Sun Feb 12 14:38:32 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 14:38:32 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Sun Feb 12 14:38:32 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900
[Sun Feb 12 14:38:32 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 8.08"
[Sun Feb 12 16:42:02 2012] fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_src64.ximg exists
[Sun Feb 12 16:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_src64.csv
[Sun Feb 12 16:42:02 2012] fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_src64_1.ximg exists
[Sun Feb 12 16:42:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_src64.csv
[Sun Feb 12 16:42:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 16:42:03 2012] fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Sun Feb 12 16:42:03 2012] fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Sun Feb 12 16:42:03 2012] Fit fullrun_mos1_xmm0200080701_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Sun Feb 12 19:04:06 2012] Warning, spatial fit 64 centroid is now closest to src. 63
[Sun Feb 12 19:04:06 2012] Source 62 is offset by -1.460681 and -5.435363 pixels which is larger than
2 X fitted extent = 1.131393 x 1.131393, not incorporating fit results
[Sun Feb 12 19:04:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 19:04:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 19:04:06 2012] Assessing source extent using major
[Sun Feb 12 19:04:06 2012] Source does appear to be extended
[Sun Feb 12 19:04:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 19:04:06 2012] Source is confused with source 63
[Sun Feb 12 22:15:05 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 22:15:05 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Sun Feb 12 22:15:05 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.900
[Sun Feb 12 22:15:05 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 8.08"
[Sun Feb 12 23:49:20 2012] fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_src61.ximg exists
[Sun Feb 12 23:49:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_src61.csv
[Sun Feb 12 23:49:20 2012] fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun Feb 12 23:49:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_src61.csv
[Sun Feb 12 23:49:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 23:49:21 2012] fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun Feb 12 23:49:21 2012] fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun Feb 12 23:49:21 2012] Fit fullrun_mos1_xmm0200080701_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Mon Feb 13 01:47:42 2012] Warning, spatial fit 61 centroid is now closest to src. 63
[Mon Feb 13 01:47:42 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 01:47:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 01:47:42 2012] Assessing source extent using major
[Mon Feb 13 01:47:42 2012] Source does appear to be extended
[Mon Feb 13 01:47:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 10:55:33 2012] XMMSAS src. selection expression = ellipse(22910.831329, 23337.738800, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 15 10:55:33 2012] Writing source region out to fullrun_mos1_xmm0200080701_pi300-10000_pass1_cl_src62_src.reg
[Wed Feb 15 10:55:33 2012] Extracting stamp from image fullrun_mos1_xmm0200080701_pi300-10000_cl_sm2.00.img.gz, (226, 231) - (301, 306)
[Wed Feb 15 10:55:33 2012] XMMSAS bgd. selection expression = annulus(22910.831329, 23337.738800, 1087.500000, 2175.000000, X, Y) && !ellipse(22089.568400, 24462.222800, 430.245612, 430.245612, 0.000000, X, Y) && !ellipse(22145.493840, 21146.643000, 386.631211, 386.631211, 0.000000, X, Y) && !ellipse(24854.184000, 24641.882400, 1161.160033, 1161.160033, 0.000000, X, Y) && !ellipse(24978.353088, 23018.009552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.630000, 24805.676200, 1114.184032, 1114.184032, 0.000000, X, Y) && !ellipse(21756.218826, 23093.221222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23996.772827, 23955.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22554.148000, 23178.992000, 1292.496037, 1292.496037, 0.000000, X, Y)
[Wed Feb 15 10:55:33 2012] Writing fullrun_mos1_xmm0200080701_pi300-10000_pass1_cl_src62.gif
[Wed Feb 15 11:16:31 2012] Mean detx,y = (-440.48, 1472.27) 
[Wed Feb 15 11:16:32 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 15 11:16:42 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 15 11:16:42 2012] Setting source spectrum file to fullrun_mos1_xmm0200080701_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Wed Feb 15 11:16:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0200080701_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Wed Feb 15 12:59:57 2012] Not generating rmf since there are only 52 counts
[Wed Feb 15 12:59:57 2012] rmf not generated due to insufficient counts
[Wed Feb 15 15:05:20 2012] Updating aperture counts using extracted products
[Wed Feb 15 15:05:20 2012] Error reading totcts from fullrun_mos1_xmm0200080701_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Wed Feb 15 15:05:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 15:05:20 2012] Using photon index=1.80, rate=0.000468, arf fullrun_mos1_xmm0200080701_pi300-10000_pass1_cl_src62.arf
[Wed Feb 15 15:05:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 15 15:05:20 2012] Updating source flux to 5.6e-15
[Wed Feb 15 15:05:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting