[Fri Mar 23 17:40:31 2012] Detection parameters:
  Position = (395.2, 286.7) = 13 11 51.32 17 28 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.0 +/- 10.7
  Background counts = 8.6
  Rate = 0.003 +/- 0.0005

[Fri Mar 23 17:40:31 2012] Off-axis axis estimate = 7.07'
[Fri Mar 23 20:02:42 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 20:02:42 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Fri Mar 23 20:02:42 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Fri Mar 23 20:02:42 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.96"
[Fri Mar 23 20:52:21 2012] fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Mar 23 20:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_src10.csv
[Fri Mar 23 20:52:21 2012] fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Mar 23 20:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_src10.csv
[Fri Mar 23 20:52:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 20:52:21 2012] fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Mar 23 20:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Mar 23 20:52:21 2012] fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Mar 23 20:52:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Mar 23 20:52:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0200000101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 20:52:50 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.006311 pixels away
[Fri Mar 23 20:52:50 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 20:52:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 20:52:50 2012] Assessing source extent using major
[Fri Mar 23 20:52:50 2012] Source does appear to be extended
[Fri Mar 23 20:52:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 23:20:03 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 23:20:03 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Fri Mar 23 23:20:03 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Fri Mar 23 23:20:03 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.96"
[Sat Mar 24 00:06:09 2012] fullrun_mos2_xmm0200000101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Mar 24 00:06:09 2012] fullrun_mos2_xmm0200000101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Mar 24 00:06:09 2012] Fit fullrun_mos2_xmm0200000101_pi300-10000_cl_pass1_src10 appears to have run properly
[Sat Mar 24 00:06:09 2012] fullrun_mos2_xmm0200000101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Mar 24 00:06:09 2012] fullrun_mos2_xmm0200000101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Mar 24 00:06:09 2012] Fit fullrun_mos2_xmm0200000101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Mar 24 00:06:37 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 23.588403 pixels away
[Sat Mar 24 00:06:37 2012] Spatial fit model total counts = 145.183000, observed total counts = 135.000000
[Sat Mar 24 00:06:37 2012] Offset between fit and detection position for source 21 = 0.055448 pixels
[Sat Mar 24 00:06:37 2012] 145.858400 total counts/ 102.000000 bgd. counts: snr = 4.342629
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.055448 pixels
  Position = (395.2, 286.6) = 13 11 51.32 17 28 28.2
  Extent = 4.3 (3.0-6.0)", rotation angle = 0
  Source counts = 43.9 +/- 12.1
  Background counts = 102.0
  Rate = 0.001 +/- 0.0004
[Sat Mar 24 00:06:37 2012] Vigneting correction estimate = 1.000000
[Sat Mar 24 00:06:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 24 00:06:37 2012] Assessing source extent using major axis lower bound
[Sat Mar 24 00:06:37 2012] Source does appear to be extended
[Sat Mar 24 00:06:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 24 02:15:29 2012] XMMSAS src. selection expression = ellipse(34336.272320, 24889.202400, 257.835607, 257.835607, 0.000000, X, Y)
[Sat Mar 24 02:15:29 2012] Writing source region out to fullrun_mos2_xmm0200000101_pi300-10000_pass1_cl_src21_src.reg
[Sat Mar 24 02:15:29 2012] Extracting stamp from image fullrun_mos2_xmm0200000101_pi300-10000_cl_sm2.00.img.gz, (380, 272) - (410, 301)
[Sat Mar 24 02:15:29 2012] XMMSAS bgd. selection expression = annulus(34336.272320, 24889.202400, 429.726012, 859.452025, X, Y)
[Sat Mar 24 02:15:29 2012] Writing fullrun_mos2_xmm0200000101_pi300-10000_pass1_cl_src21.gif
[Sat Mar 24 02:22:11 2012] Mean detx,y = (-6025.59, -6092.48) 
[Sat Mar 24 02:22:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 24 02:22:47 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 24 02:22:48 2012] Setting source spectrum file to fullrun_mos2_xmm0200000101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Mar 24 02:22:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0200000101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Mar 24 02:44:01 2012] Not generating rmf since there are only 43 counts
[Sat Mar 24 02:44:01 2012] rmf not generated due to insufficient counts
[Sat Mar 24 02:46:19 2012] Updating aperture counts using extracted products
[Sat Mar 24 02:46:19 2012] Error reading totcts from fullrun_mos2_xmm0200000101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Mar 24 02:46:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 24 02:46:20 2012] Using photon index=1.80, rate=0.00139, arf fullrun_mos2_xmm0200000101_pi300-10000_pass1_cl_src21.arf
[Sat Mar 24 02:46:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 24 02:46:20 2012] Updating source flux to 3.5e-14
[Sat Mar 24 02:47:03 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting