[Sun May 20 01:19:18 2012] Detection parameters:
  Position = (191.3, 228.1) = 18 57 9.18 -37 58 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.4 +/- 18.6
  Background counts = 31.3
  Rate = 0.005 +/- 0.0005

[Sun May 20 01:19:19 2012] Off-axis axis estimate = 9.29'
[Sun May 20 02:33:07 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sun May 20 02:33:07 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Sun May 20 02:33:07 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Sun May 20 02:33:07 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.07"
[Sun May 20 03:30:23 2012] fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 20 03:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_src3.csv
[Sun May 20 03:30:23 2012] fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 20 03:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_src3.csv
[Sun May 20 03:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 03:30:23 2012] fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 20 03:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 20 03:30:23 2012] fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 20 03:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 20 03:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165972101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 03:30:37 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.052184 pixels away
[Sun May 20 03:30:37 2012] Vigneting correction estimate = 1.000000
[Sun May 20 03:30:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 03:30:37 2012] Assessing source extent using major
[Sun May 20 03:30:37 2012] Source does appear to be extended
[Sun May 20 03:30:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 04:08:16 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Sun May 20 04:08:16 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Sun May 20 04:08:16 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Sun May 20 04:08:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.07"
[Sun May 20 05:00:40 2012] fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 20 05:00:40 2012] fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 20 05:00:40 2012] Fit fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun May 20 05:00:40 2012] fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 20 05:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 20 05:00:40 2012] fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 20 05:00:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 20 05:00:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165972101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 05:00:50 2012] Spatial fit model total counts = 481.031000, observed total counts = 481.000000
[Sun May 20 05:00:50 2012] Offset between fit and detection position for source 10 = 0.023051 pixels
[Sun May 20 05:00:50 2012] 487.248000 total counts/ 356.154000 bgd. counts: snr = 6.946466
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.023051 pixels
  Position = (191.3, 228.1) = 18 57 9.18 -37 58 19.8
  Extent = 6.5" x 3.8", rotation angle = 42
  Source counts = 131.1 +/- 22.1
  Background counts = 356.2
  Rate = 0.002 +/- 0.0003
[Sun May 20 05:00:50 2012] Vigneting correction estimate = 1.000000
[Sun May 20 05:00:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 05:00:50 2012] Assessing source extent using major
[Sun May 20 05:00:50 2012] Source does appear to be extended
[Sun May 20 05:00:50 2012] Computing asymmetry using major and minor axis, asym = 1.72
[Sun May 20 05:00:50 2012] Source is asymmetric
[Sun May 20 06:11:04 2012] XMMSAS src. selection expression = ellipse(16591.846297, 19799.288060, 388.777577, 225.864702, 42.293205, X, Y)
[Sun May 20 06:11:04 2012] Writing source region out to fullrun_mos2_xmm0165972101_pi300-10000_pass1_cl_src10_src.reg
[Sun May 20 06:11:04 2012] Extracting stamp from image fullrun_mos2_xmm0165972101_pi300-10000_cl_sm2.00.img.gz, (169, 206) - (214, 250)
[Sun May 20 06:11:04 2012] XMMSAS bgd. selection expression = annulus(16591.846297, 19799.288060, 647.962629, 1295.925257, X, Y)
[Sun May 20 06:11:04 2012] Writing fullrun_mos2_xmm0165972101_pi300-10000_pass1_cl_src10.gif
[Sun May 20 06:14:25 2012] Mean detx,y = (-7260.72, 5623.77) 
[Sun May 20 06:14:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 06:14:43 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 06:14:43 2012] Setting source spectrum file to fullrun_mos2_xmm0165972101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 20 06:14:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0165972101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May 20 06:43:36 2012] Updating aperture counts using extracted products
[Sun May 20 06:43:36 2012] Error reading totcts from fullrun_mos2_xmm0165972101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 20 06:43:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 06:43:36 2012] Using photon index=1.80, rate=0.00189, arf fullrun_mos2_xmm0165972101_pi300-10000_pass1_cl_src10.arf
[Sun May 20 06:43:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 06:43:36 2012] Updating source flux to 4.2e-14