[Fri Mar 23 10:34:02 2012] Detection parameters:
  Position = (506.2, 275.6) = 18 55 24.93 -37 57 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.5 +/- 9.2
  Background counts = 15.0
  Rate = 0.001 +/- 0.0003

[Fri Mar 23 10:34:03 2012] Off-axis axis estimate = 15.15'
[Fri Mar 23 12:51:38 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 12:51:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 12:51:38 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Fri Mar 23 12:51:38 2012] source mask rpix=3.2, npix_max = 55, mask sum = 40, frac = 0.723
[Fri Mar 23 12:51:38 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 14.00"
[Fri Mar 23 13:51:38 2012] fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_src23.ximg exists
[Fri Mar 23 13:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_src23.csv
[Fri Mar 23 13:51:38 2012] fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Mar 23 13:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_src23.csv
[Fri Mar 23 13:51:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 13:51:38 2012] fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Mar 23 13:51:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Mar 23 13:51:38 2012] fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Mar 23 13:51:38 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Mar 23 13:51:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165972001_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 13:51:53 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 18.437354 pixels away
[Fri Mar 23 13:51:53 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 13:51:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 13:51:53 2012] Assessing source extent using major
[Fri Mar 23 13:51:53 2012] Source does appear to be extended
[Fri Mar 23 13:51:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 14:20:44 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Fri Mar 23 14:20:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 23 14:20:44 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Fri Mar 23 14:20:44 2012] source mask rpix=3.2, npix_max = 55, mask sum = 40, frac = 0.723
[Fri Mar 23 14:20:44 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 14.00"
[Fri Mar 23 15:25:23 2012] fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_src23.ximg exists
[Fri Mar 23 15:25:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_src23.csv
[Fri Mar 23 15:25:23 2012] fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Mar 23 15:25:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_src23.csv
[Fri Mar 23 15:25:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 15:25:23 2012] fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Mar 23 15:25:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Mar 23 15:25:23 2012] fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Mar 23 15:25:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Mar 23 15:25:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0165972001_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 23 15:25:36 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.040855 pixels away
[Fri Mar 23 15:25:36 2012] Vigneting correction estimate = 1.000000
[Fri Mar 23 15:25:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 23 15:25:36 2012] Assessing source extent using major
[Fri Mar 23 15:25:36 2012] Source does appear to be extended
[Fri Mar 23 15:25:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 23 16:12:44 2012] XMMSAS src. selection expression = ellipse(43987.274292, 23926.385345, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 23 16:12:44 2012] Writing source region out to fullrun_mos2_xmm0165972001_pi300-10000_pass1_cl_src10_src.reg
[Fri Mar 23 16:12:44 2012] Extracting stamp from image fullrun_mos2_xmm0165972001_pi300-10000_cl_sm2.00.img.gz, (469, 238) - (544, 313)
[Fri Mar 23 16:12:44 2012] XMMSAS bgd. selection expression = annulus(43987.274292, 23926.385345, 1087.500000, 2175.000000, X, Y) && !ellipse(43331.819244, 22490.662323, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 23 16:12:44 2012] Writing fullrun_mos2_xmm0165972001_pi300-10000_pass1_cl_src10.gif
[Fri Mar 23 16:27:06 2012] Mean detx,y = (-16784.85, -901.89) 
[Fri Mar 23 16:27:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 23 16:27:38 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 23 16:27:38 2012] Setting source spectrum file to fullrun_mos2_xmm0165972001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 23 16:27:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0165972001_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Mar 23 16:58:20 2012] Not generating rmf since there are only 42 counts
[Fri Mar 23 16:58:20 2012] rmf not generated due to insufficient counts
[Fri Mar 23 16:59:14 2012] Updating aperture counts using extracted products
[Fri Mar 23 16:59:14 2012] Error reading totcts from fullrun_mos2_xmm0165972001_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 23 16:59:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 23 16:59:15 2012] Using photon index=1.80, rate=0.00127, arf fullrun_mos2_xmm0165972001_pi300-10000_pass1_cl_src10.arf
[Fri Mar 23 16:59:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 23 16:59:15 2012] Updating source flux to 6.1e-14
[Fri Mar 23 16:59:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting